Hi Edward, If you can ping the other end of the serial link, then PPP password etc, are not an issue.
There is nothing I can see that’s obviously wrong, apart from a sneaking suspicion that "async dynamic address" could be causing your issue. You have currently hard set your ip addresses, this line is defunct. Can you remove that line and give it a go. If the problem still persist can you type (after the dial-backup is connected) *sh ip route *sh ip eigrp interfaces *sh dialer maps cheers, Raj Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61335&t=61068 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
