Hello,I am trying to set the metric to 1000 for all even routes and metric-type 1 for all other routes while redistributing rip into ospf. This is based on the cyscoexpert sample lab (which I think is awesome!!).I can get the even routes to get to the rest of the network but cannot see the odd routes.What am I doing wrong? Please help.Sincerely,CN Here is my config:R4#rbr router ospf 100 area 0 authentication redistribute rip metric-type 1 subnets route-map even!access-list 99 permit 200.0.0.0 0.254.255.255 route-map even permit 10 match ip address 99 set metric 1000 ! route-map even permit 20 ! On the hub router:R3#r O E1 200.0.0.0/24 [110/1064] via 150.1.111.4, 00:23:29, Serial0 O E1 200.2.0.0/24 [110/1064] via 150.1.111.4, 00:23:29, Serial0 O E1 200.4.0.0/24 [110/1064] via 150.1.111.4, 00:23:29, Serial0 O E1 200.6.0.0/24 [110/1064] via 150.1.111.4, 00:23:29, Serial0 Why don't I see the rest of the routes????
------------------------------------------------------------------------ Help STOP SPAM: Try the new MSN 8 and get 2 months FREE* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61456&t=61456 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
