After the command "tunnel mpls traffic-eng path-option 1 dynamic", the
router reloads.
The same happen with explicit path.
The following message appear after reload: RSVP: must configure RSVP
Bandwidth first.
Any idea?
R3
ip cef
mpls traffic-eng tunnels
!
interface Loopback0
ip address 3.3.3.3 255.255.255.255
ip router isis
!
interface Serial0
no ip address
encapsulation frame-relay
fair-queue 64 64 64
ip rsvp signalling dscp 0
!
interface Serial0.32 point-to-point
bandwidth 1000
ip address 192.168.23.2 255.255.255.0
ip router isis
mpls traffic-eng tunnels
frame-relay interface-dlci 132
ip rsvp bandwidth 500 500
!
interface Tunnel0
ip unnumbered Loopback0
tunnel destination 2.2.2.2
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng autoroute announce
tunnel mpls traffic-eng priority 7 7
tunnel mpls traffic-eng bandwidth 100
!
router isis
net 47.0000.0000.0000.0003.00
is-type level-1
metric-style wide
mpls traffic-eng router-id Loopback0
mpls traffic-eng level-1
!
end
R2
ip cef
mpls traffic-eng tunnels
!
interface Loopback0
ip address 2.2.2.2 255.255.255.255
ip router isis
!
interface Serial0
no ip address
encapsulation frame-relay
fair-queue 64 64 64
ip rsvp signalling dscp 0
!
interface Serial0.23 point-to-point
bandwidth 1000
ip address 192.168.23.1 255.255.255.0
ip router isis
mpls traffic-eng tunnels
frame-relay interface-dlci 123
ip rsvp bandwidth 500 500
!
interface Tunnel0
ip unnumbered Loopback0
tunnel destination 3.3.3.3
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng autoroute announce
tunnel mpls traffic-eng priority 7 7
tunnel mpls traffic-eng bandwidth 100
!
router isis
net 47.0000.0000.0000.0002.00
is-type level-1
metric-style wide
mpls traffic-eng router-id Loopback0
mpls traffic-eng level-1
!
end
R3(config-if)#tunnel mpls traffic-eng path-option 1 dynamic
R3(config-if)#
Buffered messages:
00:00:06: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:06: %LINK-3-UPDOWN: Interface Ethernet1, changed state to up
00:00:06: %LINK-3-UPDOWN: Interface Serial0, changed state to up
00:00:06: %LINK-3-UPDOWN: Interface Serial1, changed state to down
00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0,
changed sta
te to up
00:00:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed s
tate to up
00:00:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet1,
changed s
tate to down
00:00:19: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0,
changed sta
te to down
00:00:21: %LINK-5-CHANGED: Interface Ethernet0, changed state to
administrativ
ely down
00:00:22: %LINK-5-CHANGED: Interface Ethernet1, changed state to
administrativ
ely down
00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0,
changed sta
te to up
00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed s
tate to down
00:00:25: %LINK-5-CHANGED: Interface Serial1, changed state to
administrativel
y down
00:00:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1,
changed sta
te to down
00:00:27: %SYS-5-CONFIG_I: Configured from memory by console
00:01:12: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-P-L), Experimental Version
12.0(20011017:155337)
[rraszuk-New_reorg_oct17 109]
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sat 20-Oct-01 04:12 by rraszuk
00:03:41: %SYS-5-CONFIG_I: Configured from console by console
Queued messages:
System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE
SOFTWARE (fc
1)
Copyright (c) 1986-1998 by cisco Systems
2500 processor with 14336 Kbytes of main memory
%SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be
correctly und
erstood.
%FR-5-DLCICHANGE: Interface Serial0 - DLCI 132 state changed to
ACTIVE
%FR-5-DLCICHANGE: Interface Serial0 - DLCI 134 state changed to
ACTIVE
%FR-5-DLCICHANGE: Interface Serial0 - DLCI 139 state changed to
ACTIVE
F3: 7712092+591256+933136 at 0x3000060
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-P-L), Experimental Version
12.0(20011017:155337)
[rraszuk-New_reorg_oct17 109]
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sat 20-Oct-01 04:12 by rraszuk
Image text-base: 0x03043728, data-base: 0x00001000
cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of
memory.
Processor board ID 13565364, with hardware revision 00000000
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
RSVP: must configure RSVP Bandwidth first
Press RETURN to get started!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=61947&t=61947
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
