Hello, Just stumbled upon this on Rip to Isis redistribution?
"If the source protocol's AD is higher than that of IS-IS, then the originating routes may be over-ridden by the new IS-IS route leading to flapping routes and/or incorrect next-hop addresses" What does this actually mean? Does it mean the if netw. 4.0.0.0/8 (lo0 ip=4.4.4.4/24) is being originated by Rip v1 on R1 and passed to R2 running Rip and IS-IS, then when Rip is redistributed into IS-IS on R2, R2 applies it's AD of 115 on this route and passes it upstream to other L-1 and L-2 routers. How would this lead to a flapping route or an unreachable next-hop address? I just cannot seem to find a good example of this on CCO. Does any one have any suggestions on how to clarify this? (This looks like a very likey lab question) !! Thank you. Sincerely, CN ------------------------------------------------------------------------ Add photos to your e-mail with MSN 8. Get 2 months FREE*. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62317&t=62317 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
