At 03:46 PM 2/7/2003 +0000, Cisco Nuts wrote: >Hello,I am trying to use a distribute-list out serial 1 in >isis...basically blocking an Ospf route from being leaked into the Isis >domain. It lets me type in the commands but when I do a show run, the >commands are not there!! Why??On the neighboring isis router, I do not >even get an option to set the distribute-list in??Now I know, in Ospf the >distribute-list out does not work but did not know about this in Isis?Can >anyone shed light on this? I had to use a redistribute connected with a >route-map option.Here is my config:R3-B(config)#router isis
You can't filter individual networks on an interfaces basis in a link state protocol. You can only filter them as they are generated, or more specifically identified for population in LSA/LSPs. Once in the LSA/LSP, they flood naturally. >R3-B(config-router)#distribute-list 51 out serial 1 >R3-B(config-router)#endR3-B#rbr >router isis > redistribute connected metric 3 route-map serial level-1 > redistribute rip metric 3 level-1 > net 00.0000.0000.0003.00 > is-type level-1 Thank you.Sincerely,CN > >------------------------------------------------------------------------ > >Help STOP SPAM with the new MSN 8 and get 2 months FREE* Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62643&t=62643 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
