Hi, im posting to inquire about the new feature introduced in rev 12.2(13)T1 called DMVPN.
Has anyone had any experience configuring it? Good, bad? I have a scenario where im about to deploy 36 1760 bundles (CISCO1760-VPN/K9) with some 2611XM's and a 7204 at the hub connected to a DS3. We are going to be using the full CiscoWorks package, including VMS for administration. So the scenario plays out like this: 36 sites (1760's (with VPN mods) 2611XM's (with VPN mods), All remote sites have 6 usable Internet routable IP's, hub site has a 7204 and 2611XM, the 7204 has a DS3, 2611XM has 2 T1's, HUB site running BGP advertising 2 class C's. All remote office connections will be dumped into a DMZ and ACL'ed to the internal network (PIX is the firewall). Comments questions? Advice? Welcome. --Rich Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62779&t=62779 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
