Had the same problem, just upgrading to c1700-y-mz.122-8.T5.bin helped resolve the issue.
Thanks ADIL ----- Original Message ----- From: To: Sent: Friday, February 14, 2003 4:19 AM Subject: IOS 12.2 Prob?? [7:63016] > Hi.. > > i am trying to configure a 1721 with wic 2 A/S for Async Dialin. i am > running the IOS 12.2 (c1700-y-mz.122-4.YA2.bin) the strange thing i see is > that there is no command to configure a Modem, i wanted to enter modem > autoconfigure discovery or modem autoconfigure type. it just does not allow > me to enter the command. > > it is not detecting the modem where as the other router that i have 2600 > does r8ecognise the modem. > > see the output of modem ? command > Router(config-line)#modem ? > CTS-Alarm Alarm device which only uses CTS for call control > DTR-active Leave DTR low unless line has an active incoming > connection > or EXEC > Dialin Configure line for a modern dial-in modem > Host Devices that expect an incoming modem call > InOut Configure line for incoming AND outgoing use of modem > Printer Devices that require DSR/CD active > answer-timeout Set interval between raising DTR and CTS response > dtr-delay Set interval during which DTR is held low > onhold Set the V.92 modem on hold timer duration > > Router(config-line)#modem > > Also the other part is if i load a different IOS the Card (WIC 2a/s) does > not get detected. > > I checked 12.2 IOS command reference it mentions abt the usage of commands > that i have tried above. > > has anyone faced a similar prob?? > > Any help wud be much appreciated. > thanks > murali Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63051&t=63016 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
