Happy Valentines everyone I have a deleted PVC that still works to connect through a frame switch to another router. Anyone else seen this? Here is the config r1#sh frame pvc 401
PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 401, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 pvc create time 16:43:18, last time pvc status changed 16:43:07 r1#ping 150.100.251.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 150.100.251.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 68/68/68 ms r1# r4#sh frame pvc 401 PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 401, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0 input pkts 1020 output pkts 24 in bytes 288926 out bytes 2884 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 14 out bcast bytes 1844 pvc create time 16:46:36, last time pvc status changed 16:45:46 r4#ping 150.100.251.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 150.100.251.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 68/68/68 ms r4# It shows 401 is active on one side and deleted on the other but I can ping accross to and from both sides accrose the switch. How can i get rid of that deleted pvc and make it active? Thanks Randy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63055&t=63055 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
