Randy, Just type the following: clear frame-relay inarp in Router 1....Sometime you have to shutdown the interface and bring it back again.... Juan Blanco
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of McHugh Randy Sent: Sunday, February 16, 2003 10:49 AM To: [EMAIL PROTECTED] Subject: Deleted PVC [7:63123] Does anyone know how to correct this deleted PVC perhaps by completly deleting it and recreating it? r1# r1#sh frame map Serial0.1 (up): ip 150.100.250.34 dlci 102(0x66,0x1860), dynamic, broadcast,, status defined, active Serial0.1 (up): ip 150.100.250.35 dlci 103(0x67,0x1870), dynamic, broadcast,, status defined, active Serial0 (up): ip 150.100.251.1 dlci 401(0x191,0x6410), static, broadcast, CISCO, status deleted Serial0 (up): ip 150.100.251.2 dlci 401(0x191,0x6410), static, broadcast, CISCO, status deleted Serial0.2 (up): point-to-point dlci, dlci 104(0x68,0x1880), broadcast status defined, active thx Randy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63127&t=63123 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
