I am completely frustrated. I am trying to do something very simple but am having considerable trouble. I wish only to rate-limit ALL packets coming into a particular interface on a 3550 It does have EMI and Qos is anabled. This is the config that I have tried so far and the packets just blast right through... I know the burst is larger tahn the max speed, should not matter. Incidentally, I entered 500 000 for both values but the switch auto-changed the first value( I believe since it is in values of 8 Kbps)
Any ideas? I have read the CCO doco on this over and over and I cannot see what I am missing. I suspect somethign in my class map is wrong, but I am not sure how to manipulate it... any help appreciated. pwps-esw01#sh class pwps-esw01#sh class-map Class Map match-all test2 (id 3) Match access-group 123 Class Map match-all test1 (id 2) Match any Class Map match-any class-default (id 0) Match any pwps-esw01#sh poli pwps-esw01#sh policy-map Policy Map int18 class test2 police 496000 500000 exceed-action drop pwps-esw01#sh mls qos int f0/18 FastEthernet0/18 Attached policy-map for Ingress: int18 trust state: not trusted trust mode: not trusted COS override: dis default COS: 0 DSCP Mutation Map: Default DSCP Mutation Map trust device: none pwps-esw01#sh mls qos int f0/18 st FastEthernet0/18 Ingress dscp: incoming no_change classified policed dropped (in bytes) Others: 14938711 14938711 0 0 0 Egress dscp: incoming no_change classified policed dropped (in bytes) Others: 691426721 n/a n/a 0 0 pwps-esw01# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63164&t=63164 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
