Sam, Speed and Duplex are tied at the hip - if speed is auto, duplex must be auto. Try hard-coding the speed, first, then the duplex.
-Bob Sinclair ----- Original Message ----- From: "SamN" To: Sent: Tuesday, February 18, 2003 12:18 PM Subject: Switch Port [7:63275] > switch1> (enable) set port duplex 6/8 half > Port 6/8 is in auto-sensing mode. > > The above switch is a 6500. AS i understand, the ports can be set to > full,half or auto but when i try setting it to half, it doesn't allow me to. > > thank you Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63286&t=63275 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
