Keep in ming that the CAM aging time is only 5 minutes so seeing some fluctuation does not seem to be unreasonable. The broadcast every 90 seconds is surley unrelated and since you caught it on a sniffer you should be able to se what it is.
Dave [EMAIL PROTECTED] wrote: > Any experience to share on the following problem? > > The CAM entries are changing continuously. There are not so many users > turning off their computers. Also, on two interfaces of a Catalyst 6509, > every 1 minute and 30 seconds there are a unexpected traffic that seems to > be Flooding (got with Sniffer). > > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2167 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2205 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2236 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2267 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2292 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2321 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2357 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2379 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2413 > SWITCH(enable) sh cam count dy > Total Matching CAM Entries = 2438 -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63748&t=63718 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
