Hello, I have 3 routers setup, running ospf and rip ver 1 with 2 way redistribution on the middle router.The ospf routers have loopbacks as 10.8.8.8/24 and 10.9.9.9/24The rip router has a loopback of 10.2.2.2/24.The middle router running rip has networks 10 and netw 120 defined.I cannot ping 10.9.9.9 or 10.8.8.8 from the rip routerWithout configuring static routes, how can I ping these networks?Thank you for your help.Sincerely,CN Config. on the middle router running both rip and ospf:R1-E#rbr router ospf 999 log-adjacency-changes redistribute connected subnets redistribute rip subnets network 120.20.30.0 0.0.0.255 area 0 network 120.20.40.0 0.0.0.255 area 0 ! router rip redistribute connected metric 2 redistribute ospf 999 metric 2 network 10.0.0.0 network 120.0.0.0 From the rip router:R2-B#r C 192.168.10.0/24 is directly connected, Ethernet0 10.0.0.0/24 is subnetted, 1 subnets C 10.2.2.0 is directly connected, Loopback0 120.0.0.0/24 is subnetted, 3 subnets R 120.20.40.0 [120/1] via 120.20.20.2, 00:00:14, Serial0 R 120.20.30.0 [120/1] via 120.20.20.2, 00:00:14, Serial0 C 120.20.20.0 is directly connected, Serial0 R2-B#ping 10.9.9.9Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.9.9.9, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) R2-B# Any ideas??
------------------------------------------------------------------------ MSN 8 helps ELIMINATE E-MAIL VIRUSES. Get 2 months FREE*. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63864&t=63864 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
