did you enter the no shut command ? Larry Letterman Network Engineer Cisco Systems
----- Original Message ----- From: tigers zheng To: [EMAIL PROTECTED] Sent: Thursday, February 27, 2003 5:11 AM Subject: some question about frame-relay configuration! [7:63973] I have a question about frame-relay!Please tell me why it happened? the topolofy :r1(s0)---(s0/0)r2(s0/1)---(s0/0)r3 r1:2511,r2:2620,r3:2621 the configuration: r1: interface s0 ip address 10.10.10.1 255.255.255.0 encapsulation frame-relay frame-relay lmi-type ansi frame-relay intf-type dte frame-relay interface-dlci 100 ! r3: interface s0/0 ip address 10.10.10.2 255.255.255.0 encapsulation frame-relay frame-relay lmi-type ansi frame-relay intf-type dte frame-relay interface-dlci 101 ! r2: frame-relay switching int s0/0 no ip address encapsulation frame-relay clockrate 64000 frame-relay route 100 interface s0/1 101 frame-relay lmi-type ansi frame-relay intf-type dce ! int s0/1 no ip address encapsulation frame-relay clockrate 128000 frame-relay route 101 interface s0/0 100 frame-relay lmi-type ansi frame-relay intf-type dce ! But the serial of all of the router is shutdown,line protocol is also down! I want to know what happen! Thanks very much! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64009&t=63973 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
