you have the analyzer and the router in the same port ? 1/2 according to the below text ?
set span source-port dest-port in/out/both Larry Letterman Network Engineer Cisco Systems ----- Original Message ----- From: Richard Burdette To: [EMAIL PROTECTED] Sent: Saturday, March 01, 2003 6:48 PM Subject: Span Port on 5000 [7:64186] Ok, I'm trying to capture TCP, specifically Telnet traffic going between two routers on 2 ports of the bridge. I have a protocol analyzer on port 1/2 (I've tried other bridge ports as well). The routers come in on 1/2 and 2/3. To start I enter the command 'set span 2/3 1/2 both' on the 5000 bridge. I do a 'show span' to check that the configuration took, all looks good. I fire up the analyzer on 1/2 and succesfully initiate telnet from one router to the other. My problem is that I see no TCP traffic at all, plenty of CDP, OSPF and STP traffic but no TCP. When I telnet from my box to the router I see plenty of the Telnet traffic. Why am I not able to see the traffic via the span command? Thanks. Richard Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64196&t=64186 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
