Mike Momb wrote:
> very well. My question is this, what has been this groups experience on
how
> to set the ports for the maximum bandwith. We are using a combination of
> Cat 5 & Cat 3 cables. Any advice would be appreciated.
CAT3? Ouch. If you can't be *very* sure which cable run is what (CAT3
vs. CAT5), forcing everything to 10/Full is as good as it's going to
get, because CAT3 won't support 100Mbps.
Which also makes autonegotiation A Very Bad Idea, as that will happily
negotiate 100Mbps over CAT3, even when it does what it's supposed to.
Regards,
Marco.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64486&t=64482
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
