No. Nothing happens. I was wondering. Is this Main Diagnostic Menu module part of the router by default (like Power-On Self Test, rommon or Mini-IOS) or it is a SW module that someone downloaded on it to test the equipment?
Thanks JM ""Larry Letterman"" wrote in message news:[EMAIL PROTECTED] > press the braek key on your terminal after power on and see if rommon shows > up.. > > Larry Letterman > Network Engineer > Cisco Systems > > > ----- Original Message ----- > From: Jean-Marc Simard > To: [EMAIL PROTECTED] > Sent: Tuesday, March 04, 2003 7:50 PM > Subject: Help: Main Diagnostic Menu on 2501 router??? [7:64427] > > > I just bought a 2501 router through Ebay for my CCIP/CCNP study and it's > not > supposed to have an IOS on it. When I power it up, instead of getting the > rommon> prompt, I get the Main Diagnostic Menu as shown below. If I execute > the diag tests offered all the tests pass, but I just can't get past this > menu. > > Can someone, please, tell me what is wrong with it or how I can work around > it? > > Thanks a lot > > JM > > (I had some problems with my mailer, so sorry if it gets posted twice) > > ------- (output at power up)---------- > cisco Systems > Diagnostic Monitor > > Testing boot state > Exiting boot state > Testing Main Memory from 0h to E000h. data equals address > Testing Main Memory from 0h to E000h. checkerboard > Testing Main Memory from 0h to E000h. inverse checkerboard > Clearing bss > Enabling interrupts > Exiting init > > Diagnostic Monitor for CANCUN, Version 1.7.4(4) > Compiled by haidung on Wed 19-Nov-97 14:26 > > Main Diagnostic Menu > a: alter diag flags > b: basic utilities > c: do all diags in this menu > d: do group of diags in this menu > e: bus error test > f: image checksum test > g: timer interrupt test > h: size memory > i: main memory test > j: main memory parity test > k: shared memory test > l: shared memory parity test > m: flash memory test > n: nvram test > o: aux port test > p: serial cookie test > q: serial interface test > s: ethernet (Am79C90-LANCE) test > FLAGS: Continuous OFF Stop on error OFF Ext. loopback ON Abbr. test OFF > > enter Main Diagnostic Menu item > > ------- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64549&t=64427 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
