Your IP addresses are incorrect. It looks like you forgot the 8 in 108 on R6.
Tony Schaffran Network Analyst CCIE #11071 CCNP, CCNA, CCDA, NNCSS, NNCDS, CNE, MCSE www.cconlinelabs.com "Your #1 choice for Cisco rack rentals." ----- Original Message ----- From: "John Tafasi" To: "Cisco Group Study" ; "ccielab" Sent: Friday, March 07, 2003 11:37 AM Subject: Problem with Lightstream 100, SVC > Hi Group, > > I have two atm routers that are connected to a Cisco Lightstream 100 atm > switch. I am trying to cause r6 to call r9 but the call does not succeed. I > have configured svc routes on the switch and configured the two routers to > use svc to reach each other. Below you will find the necessary > configurations and output of the debug commands. From the output of the > debug commands on the routers I can see that the routers could not register > their addresses with the arp server. > > > A > > r6#show run > Building configuration... > > Current configuration : 883 bytes > ! > version 12.2 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname r6 > ! > ! > ip subnet-zero > ! > ip ssh time-out 120 > ip ssh authentication-retries 3 > ! > ! > ! > ! > interface Ethernet0 > no ip address > shutdown > media-type 10BaseT > ! > interface Ethernet1 > no ip address > shutdown > media-type 10BaseT > ! > interface Serial0 > no ip address > shutdown > ! > interface Serial1 > no ip address > shutdown > ! > interface ATM0 > no ip address > atm pvc 1 0 5 qsaal > atm pvc 2 0 16 ilmi > no atm ilmi-keepalive > ! > interface ATM0.1 multipoint > ip address 138.10.168.1 255.255.255.0 > atm nsap-address 47.000100010001000100010001.111011101110.00 > atm arp-server nsap 47.000200020002000200020002.222022202220.00 > ! > ! > ip classless > no ip http server > ip pim bidir-enable > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > line con 0 > exec-timeout 0 0 > logging synchronous > line aux 0 > line vty 0 4 > login > ! > end > > r6# > > ======================= > > r9>ena > r9#show run > Building configuration... > > Current configuration : 643 bytes > ! > version 12.2 > service timestamps debug uptime > service timestamps log uptime > no service password-encryption > ! > hostname r9 > ! > ! > ip subnet-zero > ! > ip ssh time-out 120 > ip ssh authentication-retries 3 > ! > ! > ! > ! > interface Ethernet0 > no ip address > shutdown > ! > interface Ethernet1 > no ip address > shutdown > ! > interface ATM0 > no ip address > atm pvc 1 0 5 qsaal > atm pvc 2 0 16 ilmi > no atm ilmi-keepalive > ! > interface ATM0.1 multipoint > ip address 138.108.168.2 255.255.255.0 > atm nsap-address 47.000200020002000200020002.222022202220.00 > atm arp-server self > ! > ! > ip classless > no ip http server > ip pim bidir-enable > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > line con 0 > line aux 0 > line vty 0 4 > ! > end > > r9# > > > =================== > > > LS100#show pvc 0 > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 Mbps > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > (Gateway) > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > 0 0 5 16 0 2 UBR-BE Gateway > 0 0 16 16 0 3 UBR-BE Gateway > 0 0 32 2 0 32 UBR-BE Bi > 0 0 100 2 0 101 VBR-GS Bi > > LS100# > LS100# > LS100# > LS100# > LS100# > LS100#show pvc 0 > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 Mbps > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > (Gateway) > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > 0 0 5 16 0 2 UBR-BE Gateway > 0 0 16 16 0 3 UBR-BE Gateway > 0 0 32 2 0 32 UBR-BE Bi > 0 0 100 2 0 101 VBR-GS Bi > > LS100#show pvc 2 > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 Mbps > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > (Gateway) > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > 2 0 5 16 0 2 UBR-BE Gateway > 2 0 16 16 0 3 UBR-BE Gateway > 2 0 32 0 0 32 UBR-BE Bi > 2 0 101 0 0 100 VBR-GS Bi > > LS100#show route > Destination Type Primary VPI Secondary > VPI > 4700010001 0001000100 0100001110 1110111000 NSAP * 0 10 0 > 200 > 4700020002 0002000200 0200022220 2220222000 NSAP * 2 10 2 > 200 > > LS100#show line > Line 0 :(GOOD) > Line 1 :(NA) > Line 2 :(GOOD) > Line 3 :(NA) > Line 4 :(Loss of Signal) > Line 5 :(NA) > Line 6 :(Loss of Signal) > Line 7 :(NA) > Line 8 :(NA) > Line 9 :(NA) > Line 10:(NA) > Line 11:(NA) > Line 12:(NA) > Line 13:(NA) > Line 14:(NA) > Line 15:(NA) > > LS100# > > > ====================== > > Output of debug atm sig-all on r6 > > r6# > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - alloc_connection_id E > 00:14:02: > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF > 00:14:02: ATMSIG: Called len 20 > 00:14:02: ATMSIG: Calling len 20 > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg, Null(U0) > state > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from sig-client > ATM_OWNER_SMAP > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req Setup in > Null(U0) > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup > msg(XferAndTx), Null(U0) state > 00:14:02: ATMSIG: Called Party Addr: > 47.000200020002000200020002.222022202220.00 > r6# > 00:14:02: ATMSIG: Calling Party Addr: > 47.000100010001000100010001.111011101110.00 > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call > Initiated(U1) > 00:14:02: E164 NOT Converted > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd Release > Complete in Call Initiated(U1) > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid, location = > User > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1) -> > Null(U0) > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying Release > Complete event to client ATM0.1 > 00:14:02: > ATMAPI: (c r6# > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - alloc_connection_id F > 00:15:02: > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF > 00:15:02: ATMSIG: Called len 20 > 00:15:02: ATMSIG: Calling len 20 > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg, Null(U0) > state > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from sig-client > ATM_OWNER_SMAP > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req Setup in > Null(U0) > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup > msg(XferAndTx), Null(U0) state > 00:15:02: ATMSIG: Called Party Addr: > 47.000200020002000200020002.222022202220.00 > r6# > 00:15:02: ATMSIG: Calling Party Addr: > 47.000100010001000100010001.111011101110.00 > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call > Initiated(U1) > 00:15:02: E164 NOT Converted > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd Release > Complete in Call Initiated(U1) > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid, location = > User > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1) -> > Null(U0) > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying Release > Complete event to client ATM0.1 > 00:15:02: > ATMAPI: (c r6# > > ============== > > Output of debug atm sig-all on r9 > > > r6# > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - alloc_connection_id E > 00:14:02: > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF > 00:14:02: ATMSIG: Called len 20 > 00:14:02: ATMSIG: Calling len 20 > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg, Null(U0) > state > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from sig-client > ATM_OWNER_SMAP > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req Setup in > Null(U0) > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup > msg(XferAndTx), Null(U0) state > 00:14:02: ATMSIG: Called Party Addr: > 47.000200020002000200020002.222022202220.00 > r6# > 00:14:02: ATMSIG: Calling Party Addr: > 47.000100010001000100010001.111011101110.00 > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call > Initiated(U1) > 00:14:02: E164 NOT Converted > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd Release > Complete in Call Initiated(U1) > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid, location = > User > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1) -> > Null(U0) > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying Release > Complete event to client ATM0.1 > 00:14:02: > ATMAPI: (c r6# > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - alloc_connection_id F > 00:15:02: > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF > 00:15:02: ATMSIG: Called len 20 > 00:15:02: ATMSIG: Calling len 20 > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg, Null(U0) > state > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from sig-client > ATM_OWNER_SMAP > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req Setup in > Null(U0) > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup > msg(XferAndTx), Null(U0) state > 00:15:02: ATMSIG: Called Party Addr: > 47.000200020002000200020002.222022202220.00 > r6# > 00:15:02: ATMSIG: Calling Party Addr: > 47.000100010001000100010001.111011101110.00 > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call > Initiated(U1) > 00:15:02: E164 NOT Converted > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd Release > Complete in Call Initiated(U1) > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid, location = > User > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1) -> > Null(U0) > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying Release > Complete event to client ATM0.1 > 00:15:02: > ATMAPI: (c r6# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64763&t=64763 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
