There is a check box in the MS dialer configuration to "use remote network as default gateway". With it checked as you can imagine it creates a new default route with a low metric and increments the metrics of other default routes.
If this isn't checked many versions of the MS dialup software will insert a classful route for the prefix of the newly installed dialup interface. So for your example lets say your PPTP tunnel is addressed with 192.168.1.100, then the MS dialup software has frequently installed a 192.168.0.0/16 route. If you are lucky enough to have your internal sites fall within one classful boundary then you could lean on this behavior to build a "split-tunnel". YMMV as I doubt microsoft is committed to keeping this quirk and I can't recall which of their clients behaved which ways, just that this behavior has been extremely common. Best of Luck, Darrell Newcomb Technology Advisor, Netswitch http://www.netswitch.net ""Arni V. Skarphedinsson"" wrote in message news:[EMAIL PROTECTED] > I there a way to do split-tunneling for vpn clients connecting to a pix with > pptp so that they don4t lose internet conectivity, the clients are using the > microsoft vpn dialar. > > any examples of this would be great. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64858&t=64585 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
