Have you tried setting the selector byte to match the subinterface number. Change it to 01 versus 00 and that may help. I've seen cases with Cisco subinterfaces where this helps.
Thanks, Ian http://www.ccie4u.com Rack Rentals and Lab Scenarios On 7 Mar 2003 at 23:14, John Tafasi wrote: > I corrected the ip address but the routers still can not complete the call. > Here is the output of the debug atm sig-all after i configured the switch > that connected routers are users no another switch: > > > r6# > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) API - alloc_connection_id F3 > 04:02:04: > ATMAPI: (c->s): SETUPv2 ci: 0xF3 mp: 0 ei: 0xFFFFFFFF > 04:02:04: ATMSIG: Called len 20 > 04:02:04: ATMSIG: Calling len 20 > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) build Setup msg, Null(U0) > state > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) API - from sig-client > ATM_OWNER_SMAP > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Input event : Req Setup in > Null(U0) > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Output Setup > msg(XferAndTx), Null(U0) state > 04:02:04: ATMSIG: Called Party Addr: > 47.000200020002000200020002.222022202220.00 > r6# > 04:02:04: ATMSIG: Calling Party Addr: > 47.000100010001000100010001.111011101110.00 > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Null(U0) -> Call > Initiated(U1) > 04:02:04: E164 NOT Converted > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Input event : Rcvd Release > Complete in Call Initiated(U1) > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245)cause = mandatory > information element is missing, location = User > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Call Initiated(U1) -> > Null(U0) > 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) API - notifying Release > Complete event to client ATM0.1 > 04:02:04: > ATMAPI: (cs): SETUPv2 ci: 0xE9 mp: 0 ei: 0xFFFFFFFF > 04:01:04: ATMSIG: Called len 20 > 04:01:04: ATMSIG: Calling len 20 > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:0) build Setup msg, Null(U0) > state > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:0) API - from sig-client > ATM_OWNER_SMAP > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Input event : Req Setup in > Null(U0) > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Output Setup > msg(XferAndTx), Null(U0) state > 04:01:04: ATMSIG: Called Party Addr: > 47.000200020002000200020002.222022202220.00 > 04:01:04: ATMSIG: Calling Party Addr: > 47.000200020002000200020002.222022202220.00 > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Null(U0) -> Call > Initiated(U1) > 04:01:04: E164 NOT Converted > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Input event : Rcvd Release > Complete in Call Initiated(U1) > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234)cause = mandatory > information element is missing, location = User > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Call Initiated(U1) -> > Null(U0) > 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) API - notifying Release > Complete event to client ATM0.1 > 04:01:04: > ATMAPI: (c > To: "John Tafasi" ; "Cisco Group Study" > ; "ccielab" > Sent: Friday, March 07, 2003 1:18 PM > Subject: Re: Problem with Lightstream 100, SVC > > > > Your IP addresses are incorrect. It looks like you forgot the 8 in 108 on > > R6. > > > > > > > > Tony Schaffran > > Network Analyst > > CCIE #11071 > > CCNP, CCNA, CCDA, > > NNCSS, NNCDS, CNE, MCSE > > > > www.cconlinelabs.com > > "Your #1 choice for Cisco rack rentals." > > > > > > ----- Original Message ----- > > From: "John Tafasi" > > To: "Cisco Group Study" ; "ccielab" > > > > Sent: Friday, March 07, 2003 11:37 AM > > Subject: Problem with Lightstream 100, SVC > > > > > > > Hi Group, > > > > > > I have two atm routers that are connected to a Cisco Lightstream 100 atm > > > switch. I am trying to cause r6 to call r9 but the call does not > succeed. > > I > > > have configured svc routes on the switch and configured the two routers > to > > > use svc to reach each other. Below you will find the necessary > > > configurations and output of the debug commands. From the output of the > > > debug commands on the routers I can see that the routers could not > > register > > > their addresses with the arp server. > > > > > > > > > A > > > > > > r6#show run > > > Building configuration... > > > > > > Current configuration : 883 bytes > > > ! > > > version 12.2 > > > service timestamps debug uptime > > > service timestamps log uptime > > > no service password-encryption > > > ! > > > hostname r6 > > > ! > > > ! > > > ip subnet-zero > > > ! > > > ip ssh time-out 120 > > > ip ssh authentication-retries 3 > > > ! > > > ! > > > ! > > > ! > > > interface Ethernet0 > > > no ip address > > > shutdown > > > media-type 10BaseT > > > ! > > > interface Ethernet1 > > > no ip address > > > shutdown > > > media-type 10BaseT > > > ! > > > interface Serial0 > > > no ip address > > > shutdown > > > ! > > > interface Serial1 > > > no ip address > > > shutdown > > > ! > > > interface ATM0 > > > no ip address > > > atm pvc 1 0 5 qsaal > > > atm pvc 2 0 16 ilmi > > > no atm ilmi-keepalive > > > ! > > > interface ATM0.1 multipoint > > > ip address 138.10.168.1 255.255.255.0 > > > atm nsap-address 47.000100010001000100010001.111011101110.00 > > > atm arp-server nsap 47.000200020002000200020002.222022202220.00 > > > ! > > > ! > > > ip classless > > > no ip http server > > > ip pim bidir-enable > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > line con 0 > > > exec-timeout 0 0 > > > logging synchronous > > > line aux 0 > > > line vty 0 4 > > > login > > > ! > > > end > > > > > > r6# > > > > > > ======================= > > > > > > r9>ena > > > r9#show run > > > Building configuration... > > > > > > Current configuration : 643 bytes > > > ! > > > version 12.2 > > > service timestamps debug uptime > > > service timestamps log uptime > > > no service password-encryption > > > ! > > > hostname r9 > > > ! > > > ! > > > ip subnet-zero > > > ! > > > ip ssh time-out 120 > > > ip ssh authentication-retries 3 > > > ! > > > ! > > > ! > > > ! > > > interface Ethernet0 > > > no ip address > > > shutdown > > > ! > > > interface Ethernet1 > > > no ip address > > > shutdown > > > ! > > > interface ATM0 > > > no ip address > > > atm pvc 1 0 5 qsaal > > > atm pvc 2 0 16 ilmi > > > no atm ilmi-keepalive > > > ! > > > interface ATM0.1 multipoint > > > ip address 138.108.168.2 255.255.255.0 > > > atm nsap-address 47.000200020002000200020002.222022202220.00 > > > atm arp-server self > > > ! > > > ! > > > ip classless > > > no ip http server > > > ip pim bidir-enable > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > ! > > > line con 0 > > > line aux 0 > > > line vty 0 4 > > > ! > > > end > > > > > > r9# > > > > > > > > > =================== > > > > > > > > > LS100#show pvc 0 > > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 > > Mbps > > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > > > (Gateway) > > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > > > 0 0 5 16 0 2 UBR-BE Gateway > > > 0 0 16 16 0 3 UBR-BE Gateway > > > 0 0 32 2 0 32 UBR-BE Bi > > > 0 0 100 2 0 101 VBR-GS Bi > > > > > > LS100# > > > LS100# > > > LS100# > > > LS100# > > > LS100# > > > LS100#show pvc 0 > > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 > > Mbps > > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > > > (Gateway) > > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > > > 0 0 5 16 0 2 UBR-BE Gateway > > > 0 0 16 16 0 3 UBR-BE Gateway > > > 0 0 32 2 0 32 UBR-BE Bi > > > 0 0 100 2 0 101 VBR-GS Bi > > > > > > LS100#show pvc 2 > > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 > > Mbps > > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > > > (Gateway) > > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > > > 2 0 5 16 0 2 UBR-BE Gateway > > > 2 0 16 16 0 3 UBR-BE Gateway > > > 2 0 32 0 0 32 UBR-BE Bi > > > 2 0 101 0 0 100 VBR-GS Bi > > > > > > LS100#show route > > > Destination Type Primary VPI > Secondary > > > VPI > > > 4700010001 0001000100 0100001110 1110111000 NSAP * 0 10 0 > > > 200 > > > 4700020002 0002000200 0200022220 2220222000 NSAP * 2 10 2 > > > 200 > > > > > > LS100#show line > > > Line 0 :(GOOD) > > > Line 1 :(NA) > > > Line 2 :(GOOD) > > > Line 3 :(NA) > > > Line 4 :(Loss of Signal) > > > Line 5 :(NA) > > > Line 6 :(Loss of Signal) > > > Line 7 :(NA) > > > Line 8 :(NA) > > > Line 9 :(NA) > > > Line 10:(NA) > > > Line 11:(NA) > > > Line 12:(NA) > > > Line 13:(NA) > > > Line 14:(NA) > > > Line 15:(NA) > > > > > > LS100# > > > > > > > > > ====================== > > > > > > Output of debug atm sig-all on r6 > > > > > > r6# > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - > alloc_connection_id > > E > > > 00:14:02: > > > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF > > > 00:14:02: ATMSIG: Called len 20 > > > 00:14:02: ATMSIG: Calling len 20 > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg, > Null(U0) > > > state > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from sig-client > > > ATM_OWNER_SMAP > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req Setup > > in > > > Null(U0) > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup > > > msg(XferAndTx), Null(U0) state > > > 00:14:02: ATMSIG: Called Party Addr: > > > 47.000200020002000200020002.222022202220.00 > > > r6# > > > 00:14:02: ATMSIG: Calling Party Addr: > > > 47.000100010001000100010001.111011101110.00 > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call > > > Initiated(U1) > > > 00:14:02: E164 NOT Converted > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd > > Release > > > Complete in Call Initiated(U1) > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid, > location > > = > > > User > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1) -> > > > Null(U0) > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying Release > > > Complete event to client ATM0.1 > > > 00:14:02: > > > ATMAPI: (c > r6# > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - > alloc_connection_id > > F > > > 00:15:02: > > > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF > > > 00:15:02: ATMSIG: Called len 20 > > > 00:15:02: ATMSIG: Calling len 20 > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg, > Null(U0) > > > state > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from sig-client > > > ATM_OWNER_SMAP > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req Setup > > in > > > Null(U0) > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup > > > msg(XferAndTx), Null(U0) state > > > 00:15:02: ATMSIG: Called Party Addr: > > > 47.000200020002000200020002.222022202220.00 > > > r6# > > > 00:15:02: ATMSIG: Calling Party Addr: > > > 47.000100010001000100010001.111011101110.00 > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call > > > Initiated(U1) > > > 00:15:02: E164 NOT Converted > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd > > Release > > > Complete in Call Initiated(U1) > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid, > location > > = > > > User > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1) -> > > > Null(U0) > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying Release > > > Complete event to client ATM0.1 > > > 00:15:02: > > > ATMAPI: (c > r6# > > > > > > ============== > > > > > > Output of debug atm sig-all on r9 > > > > > > > > > r6# > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - > alloc_connection_id > > E > > > 00:14:02: > > > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF > > > 00:14:02: ATMSIG: Called len 20 > > > 00:14:02: ATMSIG: Calling len 20 > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg, > Null(U0) > > > state > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from sig-client > > > ATM_OWNER_SMAP > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req Setup > > in > > > Null(U0) > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup > > > msg(XferAndTx), Null(U0) state > > > 00:14:02: ATMSIG: Called Party Addr: > > > 47.000200020002000200020002.222022202220.00 > > > r6# > > > 00:14:02: ATMSIG: Calling Party Addr: > > > 47.000100010001000100010001.111011101110.00 > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call > > > Initiated(U1) > > > 00:14:02: E164 NOT Converted > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd > > Release > > > Complete in Call Initiated(U1) > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid, > location > > = > > > User > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1) -> > > > Null(U0) > > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying Release > > > Complete event to client ATM0.1 > > > 00:14:02: > > > ATMAPI: (c > r6# > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - > alloc_connection_id > > F > > > 00:15:02: > > > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF > > > 00:15:02: ATMSIG: Called len 20 > > > 00:15:02: ATMSIG: Calling len 20 > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg, > Null(U0) > > > state > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from sig-client > > > ATM_OWNER_SMAP > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req Setup > > in > > > Null(U0) > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup > > > msg(XferAndTx), Null(U0) state > > > 00:15:02: ATMSIG: Called Party Addr: > > > 47.000200020002000200020002.222022202220.00 > > > r6# > > > 00:15:02: ATMSIG: Calling Party Addr: > > > 47.000100010001000100010001.111011101110.00 > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call > > > Initiated(U1) > > > 00:15:02: E164 NOT Converted > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd > > Release > > > Complete in Call Initiated(U1) > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid, > location > > = > > > User > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1) -> > > > Null(U0) > > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying Release > > > Complete event to client ATM0.1 > > > 00:15:02: > > > ATMAPI: (c > r6# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64868&t=64789 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
