I was doing some ISDN failover testing tonight and found that I was getting a 'incorrect SPID' error. During the testing I read up on troubleshooting ISDN issues from cisco.com and came across a note that in using 5ess switchtypes for the BRI interface, one doesn't need the "isdn spid[x] [SPID] [spidID]" line. When I removed it, and did the failover test, everything worked fine. I was wondering if there is anything affected if I remove that line (i.e. encryption, authentication, etc.). Any assistance will be greatly appreciated.
-Nate Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65489&t=65489 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
