I don't buy the layer 2 loop argument, it's more likely an ASIC problem, the banff is a chipset consisting of three ASICs. Do a "sh banff-reset" and if you have a large number of reset you probably need to replace hardware. I assume this is a Cat5000 series switch.
Dave Scott wrote: > They are some sort of counters in engineering mode on the catalyst. The > only info. I could find on them says they have something to do with the > EARL. TAC is telling somebody that it's a sign of a layer 2 loop. Anybody? > > Thanks, > Scott -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 I would rather have a German division in front of me than a French one behind me." --- General George S. Patton Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65772&t=65765 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
