Hi Stephanie, If you are using an A-5 clipper you shouldn't have to unscrew the blade to take it off the clippers. You just press that little bar/button (its located where the blade meets the clippers) , then push the blade away from the clippers and you'll be able to pull it off. The blade sits on a little hinge. When you push the blade away from the clippers, you are opening up the hinge. If you unscrewed the blade to remove it from the clippers, you've taken the blade apart. You need to open up the hinge assembly, put the pieces of the blade back together (you can probably find a picture of a blade on a web site to get you through it) and then put the blade on the hinge and push it toward the clippers. If you go to <A HREF="http://www.neserum.com";>http://www.neserum.com</A> and look for a Replacement Hinge Assembly for an Oster clipper, you'll see a picture of the part.
I don't know that this will help. It is difficult to explain (easier to demonstrate) :-) Good Luck!! Vicky Bailey DerbyRun Cavaliers ========================================================= "Magic Commands": to stop receiving mail for awhile, click here and send the email: mailto:[EMAIL PROTECTED]?body=SET%20CKCS-L%20NOMAIL to start it up gain click here: mailto:[EMAIL PROTECTED]?body=SET%20CKCS-L%20MAIL E-mail [EMAIL PROTECTED] for assistance. Search the Archives... http://apple.ease.lsoft.com/archives/ckcs-l.html All e-mail sent through CKCS-L is Copyright 1999 by its original author.
