Hi,
I'm trying to get clamav-milter working under FreeBSD 5.1 with sendmail
8.12.9 and have it configured with spamass-milter (using the M4 constructs).
It appears first in the milters list but when I try to send mail through it,
nothing ever happens. I tried sending the test files as attachments and
nothing happened (mail delivered normally).
Spamass-milter is working fine, so I know that mail is getting filtered, but
not through clamav-milter.
I did a truss on the clamav-milter process while sending mail to try to see
if it was ever even getting anything, and it is, but I see an error in the
truss (Input/Output error) that does not appear anywhere (its being written
to stderr, which I guess is not going anywhere). I've included the truss
output below, with the interesting bits annotated to make it easier to
locate them. Basically, an accept() call is made, fd 6 is returned, some
reading a writing to fd 6 happens, then the error, a little more reading and
writing to fd6, then the fd is closed.
I'm new to this list, so I hope its OK to post this level of detail here.
If not, please let me know. If anyone knows how to get more/better debug
info, please also let me know.
Thanks in advance,
rgr
***** truss output from clamav-milter when a normal message is sent ****
gettimeofday(0x28093178,0x0) = 0 (0x0)
poll(0x8051c00,0x1,0x0) = 0 (0x0)
poll(0x805d000,0x1,0x0) = 0 (0x0)
poll(0x805d000,0x2,0x1388) = 1 (0x1)
gettimeofday(0x28093178,0x0) = 0 (0x0)
>>>accept(0x5,{ AF_UNIX "" },0xbfbff8f4) = 6 (0x6)
>>>fcntl(0x6,0x3,0x0) = 6 (0x6)
>>>fcntl(0x6,0x4,0x6) = 0 (0x0)
>>>setsockopt(0x6,0xffff,0x8,0xbfbff8f0,0x4) = 0 (0x0)
poll(0x8051c00,0x1,0x0) = 0 (0x0)
poll(0x806a400,0x1,0x0) = 0 (0x0)
poll(0x805d000,0x2,0x0) = 0 (0x0)
poll(0x805d000,0x3,0xdba) = 1 (0x1)
gettimeofday(0x28093178,0x0) = 0 (0x0)
>>>read(0x6,0xbfadcdf0,0x5) = 5 (0x5)
poll(0x806a400,0x1,0x0) = 1 (0x1)
>>>read(0x6,0x8056100,0xc) = 12 (0xc)
poll(0x806a400,0x1,0x0) = 1 (0x1)
>>>write(6,0xbfadce10,5) = 5 (0x5)
poll(0x806a400,0x1,0x0) = 1 (0x1)
>>>write(6,0xbfadcef0,12) = 12 (0xc)
poll(0x806a400,0x1,0x0) = 0 (0x0)
poll(0x805d000,0x2,0x0) = 0 (0x0)
poll(0x805d000,0x3,0xda0) = 1 (0x1)
gettimeofday(0x28093178,0x0) = 0 (0x0)
>>>read(0x6,0xbfadcdf0,0x5) = 5 (0x5)
poll(0x806a400,0x1,0x0) = 1 (0x1)
>>>read(0x6,0x806b000,0x88) = 136 (0x88)
poll(0x806a400,0x1,0x0) = 1 (0x1)
>>>read(0x6,0xbfadcdf0,0x5) = 5 (0x5)
poll(0x806a400,0x1,0x0) = 1 (0x1)
>>>read(0x6,0x8069180,0x25) = 37 (0x25)
***write(1,0x806c000,68) ERR#5 'Input/output
error'
poll(0x806a400,0x1,0x0) = 1 (0x1)
>>>write(6,0xbfadce10,5) = 5 (0x5)
poll(0x806a400,0x1,0x0) = 1 (0x1)
>>>read(0x6,0xbfadcdf0,0x5) = 5 (0x5)
>>>fstat(6,0xbfadcf20) = 0 (0x0)
>>>close(6) = 0 (0x0)
clock_gettime(0x0,0xbfaedfa8) = 0 (0x0)
poll(0x805d000,0x1,0x0) = 0 (0x0)
poll(0x805d000,0x2,0x134b) = 0 (0x0)
--
Richard G. Roberto
[EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
