Hi! This is a confirmed bud of 0.95 clamav-milter. Fix to be expected soon:
See: https://wwws.clamav.net/bugzilla/show_bug.cgi?id=1531 Regards, Lyubomir ----- Original Message ----- From: "Steffan Henke" <[email protected]> To: <[email protected]> Sent: Saturday, April 04, 2009 12:49 PM Subject: [Clamav-users] clamav-milter 0.95 > > I tried to upgrade my previous 0.94 installation and have issues with the > new milter, although I went through the docs, eg. at > http://lurker.clamav.net/message/20081205.152347.a7d7c9ee.en.html > > I installed clamav-0.95-1.el4.rf.src.rpm , removed > /etc/sysconfig/clamav-milter and modified my /etc/clamav-milter.conf. > However, sendmail does not access the milter properly, no matter if I use > local: or inet: mode. > To avoid any permission issues, I use > > MilterSocket inet:[email protected] > > in my conf and access that port in my sendmail.mc via > INPUT_MAIL_FILTER(`clamav', `S=inet:[email protected], F=, T=S:4m;R:4m')dnl > > - but the Eicar test string isn't detected, all messages pass. > The port is open: > telnet localhost 7357 > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > > and sendmail complains immediately once I shutdown the milter, but no > emails get scanned. > clamd is up and running, both accessible via socket and on port 3310. > > I noticed the announcement that the "old" milter is included in the 0.95 > tarball - are there any instructions how to compile that one ? A > configure --enable-milter doesn't build the old milter, only the new one. > > Any help really appreciated... > > Regards, > > Steffan > > -- > No part of this message can be made available on any web page, > message board or newsgroup without the permission of the sender. > _______________________________________________ > Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net > http://www.clamav.net/support/ml > _______________________________________________ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://www.clamav.net/support/ml
