Hi Folks, Any way to resolve this issue clamav-freshclam service?
When I ran the freshclam command, it showed the log without any issue, but when I ran toaststat it stopped. On Fri, Jul 2, 2021 at 12:17 PM ChandranManikandan <kand...@gmail.com> wrote: > Hi Eric, > > Am running Centos 7 64 Bit with the Qmailtoaster system. Usually update > through the command line . > I have seen the clamav 102-2.elf version update on my system in the webmin > control panel and updated through the panel. > The freshclam command is running without issue, but when I ran toaststat > clamav-freshclam was stopped and unable to be active and run. > > My output below. > *cat /usr/lib/systemd/system/clamav-freshclam.service* > > [Unit] > Description=ClamAV virus database updater > Documentation=man:freshclam(1) man:freshclam.conf(5) > https://www.clamav.net/documents > # If user wants it run from cron, don't start the daemon. > ConditionPathExists=!/etc/cron.d/clamav-update > Wants=network-online.target > After=network-online.target > > [Service] > ExecStart=/usr/bin/freshclam -d --foreground=true > > [Install] > WantedBy=multi-user.target > > *cat /etc/freshclam.conf* > > ## Example config file for freshclam > ## Please read the freshclam.conf(5) manual before editing this file. > ## > > > # Comment or remove the line below. > #Example > > # Path to the database directory. > # WARNING: It must match clamd.conf's directive! > # Default: hardcoded (depends on installation options) > #DatabaseDirectory /var/lib/clamav > > # Path to the log file (make sure it has proper permissions) > # Default: disabled > #UpdateLogFile /var/log/clamav/freshclam.log > #UpdateLogFile /var/log/freshclam.log > > # Maximum size of the log file. > # Value of 0 disables the limit. > # You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes) > # and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). > # in bytes just don't use modifiers. If LogFileMaxSize is enabled, > # log rotation (the LogRotate option) will always be enabled. > # Default: 1M > LogFileMaxSize 2M > > # Log time with each message. > # Default: no > LogTime yes > > # Enable verbose logging. > # Default: no > LogVerbose yes > > # Use system logger (can work together with UpdateLogFile). > # Default: no > #LogSyslog yes > > # Specify the type of syslog messages - please refer to 'man syslog' > # for facility names. > # Default: LOG_LOCAL6 > #LogFacility LOG_MAIL > > # Enable log rotation. Always enabled when LogFileMaxSize is enabled. > # Default: no > LogRotate yes > > # This option allows you to save the process identifier of the daemon > # Default: disabled > #PidFile /var/run/freshclam.pid > > # By default when started freshclam drops privileges and switches to the > # "clamav" user. This directive allows you to change the database owner. > # Default: clamav (may depend on installation options) > #DatabaseOwner clamupdate > > # Use DNS to verify virus database version. Freshclam uses DNS TXT records > # to verify database and software versions. With this directive you can > change > # the database verification domain. > # WARNING: Do not touch it unless you're configuring freshclam to use your > # own database verification domain. > # Default: current.cvd.clamav.net > #DNSDatabaseInfo current.cvd.clamav.net > > # database.clamav.net is now the primary domain name to be used > world-wide. > # Now that CloudFlare is being used as our Content Delivery Network (CDN), > # this one domain name works world-wide to direct freshclam to the closest > # geographic endpoint. > # If the old db.XY.clamav.net domains are set, freshclam will > automatically > # use database.clamav.net instead. > DatabaseMirror database.clamav.net > > # How many attempts to make before giving up. > # Default: 3 (per mirror) > #MaxAttempts 5 > > # With this option you can control scripted updates. It's highly > recommended > # to keep it enabled. > # Default: yes > #ScriptedUpdates yes > > # By default freshclam will keep the local databases (.cld) uncompressed to > # make their handling faster. With this option you can enable the > compression; > # the change will take effect with the next database update. > # Default: no > #CompressLocalDatabase no > > # With this option you can provide custom sources for database files. > # This option can be used multiple times. Support for: > # http(s)://, ftp(s)://, or file:// > # Default: no custom URLs > #DatabaseCustomURL http://myserver.example.com/mysigs.ndb > #DatabaseCustomURL https://myserver.example.com/mysigs.ndb > #DatabaseCustomURL https://myserver.example.com:4567/whitelist.wdb > #DatabaseCustomURL ftp://myserver.example.com/example.ldb > #DatabaseCustomURL ftps://myserver.example.com:4567/example.ndb > #DatabaseCustomURL file:///mnt/nfs/local.hdb > # This option allows you to easily point freshclam to private mirrors. > # If PrivateMirror is set, freshclam does not attempt to use DNS > # to determine whether its databases are out-of-date, instead it will > # use the If-Modified-Since request or directly check the headers of the > # remote database files. For each database, freshclam first attempts > # to download the CLD file. If that fails, it tries to download the > # CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo > # and ScriptedUpdates. It can be used multiple times to provide > # fall-back mirrors. > # Default: disabled > #PrivateMirror mirror1.example.com > #PrivateMirror mirror2.example.com > > # Number of database checks per day. > # Default: 12 (every two hours) > #Checks 24 > > # Proxy settings > # The HTTPProxyServer may be prefixed with [scheme]:// to specify which > kind > # of proxy is used. > # http:// HTTP Proxy. Default when no scheme or proxy type is > specified. > # https:// HTTPS Proxy. (Added in 7.52.0 for OpenSSL, GnuTLS and NSS) > # socks4:// SOCKS4 Proxy. > # socks4a:// SOCKS4a Proxy. Proxy resolves URL hostname. > # socks5:// SOCKS5 Proxy. > # socks5h:// SOCKS5 Proxy. Proxy resolves URL hostname. > # Default: disabled > #HTTPProxyServer https://proxy.example.com > #HTTPProxyPort 1234 > #HTTPProxyUsername myusername > #HTTPProxyPassword mypass > > # If your servers are behind a firewall/proxy which applies User-Agent > # filtering you can use this option to force the use of a different > # User-Agent header. > # Default: clamav/version_number > #HTTPUserAgent SomeUserAgentIdString > > # Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful > for > # multi-homed systems. > # Default: Use OS'es default outgoing IP address. > #LocalIPAddress aaa.bbb.ccc.ddd > > # Send the RELOAD command to clamd. > # Default: no > #NotifyClamd /path/to/clamd.conf > > # Run command after successful database update. > # Default: disabled > #OnUpdateExecute command > # Run command when database update process fails. > # Default: disabled > #OnErrorExecute command > > # Run command when freshclam reports outdated version. > # In the command string %v will be replaced by the new version number. > # Default: disabled > #OnOutdatedExecute command > > # Don't fork into background. > # Default: no > #Foreground yes > > # Enable debug messages in libclamav. > # Default: no > #Debug yes > > # Timeout in seconds when connecting to database server. > # Default: 30 > #ConnectTimeout 60 > > # Timeout in seconds when reading from database server. > # Default: 0 > #ReceiveTimeout 1800 > > # With this option enabled, freshclam will attempt to load new > # databases into memory to make sure they are properly handled > # by libclamav before replacing the old ones. > # Default: yes > #TestDatabases yes > > # This option enables support for Google Safe Browsing. When activated for > # the first time, freshclam will download a new database file > # (safebrowsing.cvd) which will be automatically loaded by clamd and > # clamscan during the next reload, provided that the heuristic phishing > # detection is turned on. This database includes information about websites > # that may be phishing sites or possible sources of malware. When using > this > # option, it's mandatory to run freshclam at least every 30 minutes. > # Freshclam uses the ClamAV's mirror infrastructure to distribute the > # database and its updates but all the contents are provided under Google's > # terms of use. > # See https://transparencyreport.google.com/safe-browsing/overview > # and https://www.clamav.net/documents/safebrowsing for more information. > # Default: no > #SafeBrowsing yes > # This option enables downloading of bytecode.cvd, which includes > additional > # detection mechanisms and improvements to the ClamAV engine. > # Default: yes > #Bytecode no > > # Include an optional signature databases (opt-in). > # This option can be used multiple times. > #ExtraDatabase dbname1 > #ExtraDatabase dbname2 > > # Exclude a standard signature database (opt-out). > # This option can be used multiple times. > #ExcludeDatabase dbname1 > #ExcludeDatabase dbname2 > > > > > > On Thu, Jul 1, 2021 at 9:54 PM Eric Broch via clamav-users < > clamav-users@lists.clamav.net> wrote: > >> # cat /etc/freshclam.conf >> >> Show output on list. >> On 7/1/2021 2:46 AM, ChandranManikandan via clamav-users wrote: >> >> Hi Folks, >> >> I have updated the below packages through the webmin panel. >> Jul 01 13:27:50 Updated: clamav-filesystem-0.103.2-2.el7.noarch >> Jul 01 13:27:51 Updated: clamav-lib-0.103.2-2.el7.x86_64 >> Jul 01 13:27:52 Updated: clamav-update-0.103.2-2.el7.x86_64 >> Jul 01 13:27:52 Updated: clamav-0.103.2-2.el7.x86_64 >> Jul 01 13:27:52 Updated: clamd-0.103.2-2.el7.x86_64 >> >> After updating i got the below clamav-freshclam error. >> >> systemd service: clamav-freshclam: [ FAILED ] >> >> I have restarted the clamav-freshclam service but still the below message >> came. >> >> ● clamav-freshclam.service - ClamAV virus database updater >> Loaded: loaded (/usr/lib/systemd/system/clamav-freshclam.service; >> enabled; vendor preset: disabled) >> Active: inactive (dead) since Thu 2021-07-01 13:28:11 +08; 1h 8min ago >> Condition: start condition failed at Thu 2021-07-01 14:19:49 +08; 17min >> ago >> ConditionPathExists=!/etc/cron.d/clamav-update was not met >> Docs: man:freshclam(1) >> man:freshclam.conf(5) >> https://www.clamav.net/documents >> Main PID: 1164 (code=exited, status=0/SUCCESS) >> >> systemd[1]: Stopped ClamAV virus database >> >> Appreciate anyone assisting me? >> >> -- >> >> >> *Regards, Manikandan.C * >> >> _______________________________________________ >> >> clamav-users mailing >> listclamav-users@lists.clamav.nethttps://lists.clamav.net/mailman/listinfo/clamav-users >> >> >> Help us build a comprehensive ClamAV >> guide:https://github.com/vrtadmin/clamav-faq >> http://www.clamav.net/contact.html#ml >> >> >> _______________________________________________ >> >> clamav-users mailing list >> clamav-users@lists.clamav.net >> https://lists.clamav.net/mailman/listinfo/clamav-users >> >> >> Help us build a comprehensive ClamAV guide: >> https://github.com/vrtadmin/clamav-faq >> >> http://www.clamav.net/contact.html#ml >> > > > -- > > > *Regards,Manikandan.C* > -- *Regards,Manikandan.C*
_______________________________________________ clamav-users mailing list clamav-users@lists.clamav.net https://lists.clamav.net/mailman/listinfo/clamav-users Help us build a comprehensive ClamAV guide: https://github.com/vrtadmin/clamav-faq http://www.clamav.net/contact.html#ml
