Nate, what are these "security issues"? We had the same slowness and my TAC engineer suggested we comment out the CSRFFilters.
-Chad E Smith- University of Dayton Network Engineer On Fri, 18 Jul 2008 12:48:35 -0400, Nathaniel Austin <[EMAIL PROTECTED]> wrote: >Hi Wendy, > >The cause for issue 1 is the CSRF security enhancements that were made >in 4.1.3.x. If you disable CSRF (not recommended due to security issues) >the delay goes away. > >Last I knew development was looking into it. > >Nate > >SHIH, WENDY wrote: >> >> Hi, >> >> We just upgraded CAM/CAS from 4.1.1 to 4.132 version with in-band >> implantation. We only have 200 users now but are experiencing slowness >> issue in CAM. Not sure if you have similar issue or have suggestions >> for below: >> >> 1. I noticed that when I select either Rules or CCA Report after >> upgrade, it takes over 10 to 15 seconds which is very slow in >> comparison to before upgrade. The CAM CPU average usage is around 2 >> -10% but at times peaked to 30% most. >> >> 2. In report, I can click on “Export” and save the file but if I click on “Export (with Text)”, then I receive server out of memory error. “Apache Tomcat/4.131 Caused by: java.lang.OutOfMemoryError”. The CPU peaked to 25% when I run this command. >> >> 3. We are not using cisco gear and this is the last upgrade we can do on our hardware. I like the new features in 4.132 agent and would like to solve this issue before the mass comes back. >> >> Thank you in advance. >> Wendy Shih >> >========================================================================
