I have not thoroughly tested this solution but it seems to have fixed the 2 cases I have come across. Go into the network cards properties, click the advanced table, look for the Priority and Vlan attribute, then choose Priority and Vlan Disabled. There is another attribute called Vlan that is set to 1 or 0 in these cases, so perhaps this has something to do it. I haven't had to do anything with Unidentified Networks or anything listed below to resolve their issues.
Let the list know if this works for everyone, is just another temporary band-aid or if anyone finds a better permanent solution. Brian From: Cisco Clean Access Users and Administrators [mailto:[EMAIL PROTECTED] On Behalf Of Tindall, Dave Sent: Thursday, September 04, 2008 1:36 PM To: [email protected] Subject: Re: Multiple Networks, Unidentified Networks, Default Route 0.0.0.0 Just a wild guess, but at least one device on our campus was solved by this KB article, having the symptom of the strange default route. http://support.microsoft.com/kb/928233 Dave Tindall Asst VP for Technology Services (CIO) Seattle Pacific University Computer & Information Systems Phone: (206) 281-2239 Fax: (206) 281-2850 Email: [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> Web: http://www.spu.edu<http://www.spu.edu/> From: Cisco Clean Access Users and Administrators [mailto:[EMAIL PROTECTED] On Behalf Of SHIH, WENDY Sent: Thursday, September 04, 2008 10:20 AM To: [email protected] Subject: Re: Multiple Networks, Unidentified Networks, Default Route 0.0.0.0 Hi, This is posted on ResNet listserv but not sure if it will work for your situation. What we have found that works for us is by going to Network Sharing Center => Customize => View Status and removed all of the Unidentified networks. Then, do a Vista Winsock fix. It seems to have worked on those PCs that have this issue so far. Someone just posted below on the ResNet listserv but we have not had to do any restore yet. We have experienced a number of users with MAC address with all 0's. What is interesting in our cases is that the connection device is only viewable through IPConfig /all, it is not showing at all in the Vista Network and Sharing interface. We also have not found a consistent solution. However, a few users have on their own used the restoration disks they had which has cleared the issue. Best regards, Anthony Smith Academic Services Computing Information Technology University at Buffalo State University of New York [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> tel. 716-645-5362 From: Cisco Clean Access Users and Administrators [mailto:[EMAIL PROTECTED] On Behalf Of Shaun Pillé Sent: Thursday, September 04, 2008 12:49 PM To: [email protected] Subject: Multiple Networks, Unidentified Networks, Default Route 0.0.0.0 I have a problem that keeps appearing on randomly on the network. Several Vista computers have the same symptoms and are unable to connect to the Internet. In the Network and Sharing Center, while connected to the LAN, multiple networks are listed with one or more of them being an Unidentified Network. If I look at the output of "ipconfig /all", the default gateway has two addresses, with the first one being 0.0.0.0, and the second one being the Clean Access Server for that dorm. If I open a command prompt with administrative privilege, and run "route delete 0.0.0.0" followed by an "ipconfig /release" and "ipconfig /renew", the multiple networks disappear and the connection starts to work. This is only a temporary fix and the problem seems to reappear on some computers. Has anyone seen this error? Is there a permanent fix for this? We are using the Clean Access Server as our DHCP server. Thanks, Shaun Pillé Network Manager Campus Technologies, LLC [EMAIL PROTECTED]
