I've been seeing the same issue with the kclick command take 95% or higher CPU utilization as well on our CCA3140 hardware running Virtual Gateway In Band. I've notified Cisco TAC but haven't heard anything back...
Kyle Torkelson University of Sioux Falls -----Original Message----- From: Cisco Clean Access Users and Administrators [mailto:[email protected]] On Behalf Of Ladislav Nemec Sent: Thursday, November 12, 2009 7:16 AM To: [email protected] Subject: High CPU of NAC server 4.7 under vmware (process kclick) Hi, I've upgraded NAC server (CAS) from release 4.5 to 4.7 running in my LAB setup under VWWARE ESX server. Immediately, if I add CAS under NAC manager (CAM), CPU of CAS is almost 100% - process "kclick". Same behavior seems to be with fresh 4.7 installation. Only interface Eth0 is connected during adding CAS under CAM (it was requirement within 4.5 release as I know). How to solve this problem? I'm using demo license. I know, that vmware platform is not officially supported by TAC, but this is for testing and learning purpose only. Ladislav.
