Peter Memishian wrote: > > I found a problem during the Clearview project development today, that a > > "dladm create-vlan" operation will mysteriously cause an interface to be > > plumbed. After some investigation, I found that the problem is related to > > interaction of a VLAN minor node creation and the ip_rcm rcm module, and > > this problem also exists in Nevada: that an interface will be plumbed when > > you tries to snoop a VLAN. > > > > Below are the steps to reproduce the problem: > > > > # ifconfig bge1 > > ifconfig: status: SIOCGLIFFLAGS: bge1: no such interface > > > > # touch /etc/hostname.bge1 > > > > # snoop -d bge1001 > > Using device bge1001 (promiscuous mode) > > ^C > > > > # ifconfig bge1 > > bge1: flags=201000802<BROADCAST,MULTICAST,IPv4,CoS> mtu 1500 index 5 > > inet 0.0.0.0 netmask 0 > > ether 0:3:ba:50:bd:ea > > > > Goodness! > I've filed 6551032.
Thanks - Cathy
