I was installing with apt-get¹, is there a way to install a previous version with apt-get? I tried using the version number I got from a working install, but apt-get didn¹t recognize that version number.
Thanks Kevin Kevin Heath High Solution Architect Tropo, Inc. [email protected] Skype: kevin.heath.high Mobile: +1 (650) 798-4772 From: Eleanor Merry <[email protected]> Date: Wednesday, December 18, 2013 at 5:31 AM To: Kevin High <[email protected]>, "[email protected]" <[email protected]> Subject: RE: [Clearwater] Two identical installations with two different configurations.Two identical installations with two different configurations. Hi Kevin, We¹ve now identified the issue. In the latest release, sprout strips the local Record-Route headers in a request, in order to prevent the request being routed repeatedly and wastefully to the same sprout. The Record-Route header is counted as local when it matches the sprout domain (not counting the port). On an all-in-one node, this means that any sprout Record-Route headers (localhost:5054) are correctly removed. However, the Record-Route headers for bono¹s internal address (localhost:5058) are incorrectly removed; causing the problems you¹ve been seeing where the request was sent directly to bono¹s external address. A fix for this issue has gone in now, and you can pull it from the latest repo. This hasn¹t gone through our full end of release QA; our next stable release that contains this fix will be released in the next few days. If you want to use the fix in the latest repo, then you should edit /etc/apt/sources.list.d/clearwater.list/ so that it contains ³deb http://repo.cw-ngv.com/~staging/repo binary/², then run sudo clearwater-upgrade¹ to install the new version. Ellie From: [email protected] [mailto:[email protected]] On Behalf Of Kevin High Sent: 16 December 2013 20:10 To: [email protected] Subject: Re: [Clearwater] Two identical installations with two different configurations.Two identical installations with two different configurations. On further examination I am finding that there are different versions numbers. Non-working installation: [cw-aio]ubuntu@ims:~$ apt-show-versions sprout sprout/binary uptodate 1.0-131206.162136 Working installation: [cw-aio]ubuntu@ims:~$ apt-show-versions sprout sprout/binary upgradeable from 1.0-131120.153946 to 1.0-131206.162136 It also appears that I can not install a specific version [cw-aio]ubuntu@ims:~$ sudo DEBIAN_FRONTEND=noninteractive apt-get install ellis=1.0-131113.121129 --yes -V Reading package lists... Done Building dependency tree Reading state information... Done E: Version '1.0-131113.121129' for 'ellis' was not found Kevin Heath High Solution Architect Tropo, Inc. From: Kevin High <[email protected]> Date: Sunday, December 15, 2013 at 11:30 PM To: <[email protected]> Subject: Two identical installations with two different configurations. I just did two manual installations of Clearwater on one AWS instances on two different AWS accounts and in two different regions. The first installation I did on Nov 20th worked wonderfully with the only exception was that for some reason Clearwater added a line in /etc/hosts resolving the external hostname to the internal address, which conflicted with the public hostname setting in /etc/clearwater/config causing the Contact header to have the wrong IP once I changed the /etc/clearwater/config to point to the public IP address, then it worked perfectly and continues to work. The second installation I did on Dec 6th appears to be setup correctly, but I am not able to connect the call. Looking at the traces the ACK that would notify the callee that it has successfully answered the phone is not going back to the client. Instead it appears to be being sent back to sprout. Looking at the Route headers for (comparing against the working installation) there is an extra Route header for sprout. On further examination, the processes between the two different installations also have different sets of parameters being passed, and this is reflective in the bono init scripts /etc/init.d/bono These are the parameters for the working installation. Though it is perplexing that the sprout public-host parameter has the private ip as the value (domain names and ip address redacted on purpose). bono 27814 0.2 0.5 1092848 45072 ? Sl Dec13 10:35 /usr/share/clearwater/bin/bono --system bono@<first install public ip> --domain <first install domain> --localhost <first install private ip> --public-host <first install public ip> --alias <first install public ip> --trusted-port 5058 --untrusted-port 5060 --edge-proxy sprout.<first install domain>:5054:50:600 --sas 0.0.0.0 --pjsip-threads 1 --worker-threads 2 -a /var/log/bono -F /var/log/bono -L 5 --ibcf <first install public ip> --bono-domain bono.<first install domain> sprout 27853 0.2 1.0 2124192 83364 ? Sl Dec13 10:27 /usr/share/clearwater/bin/sprout --system sprout@<first install public ip> --domain <first install domain> --localhost <first install private ip> --public-host <first install private ip> --sprout-domain sprout.<first install domain> --alias sprout.<first install domain> --trusted-port 5054 --realm <first install domain> --memstore /etc/clearwater/cluster_settings --hss hs.<first install domain>:8888 --xdms homer.<first install domain>:7888 --sas 0.0.0.0 --pjsip-threads 1 --worker-threads 100 -a /var/log/sprout -F /var/log/sprout -L 5 These are the parameters for the non-working installation bono 1238 0.2 0.2 1240344 42792 ? Sl 20:28 0:06 /usr/share/clearwater/bin/bono --system bono@<second install public ip> --domain <second install domain> --localhost <second install private ip> --public-host <second install public ip> --alias <second install public ip> --trusted-port 5058 --untrusted-port 5060 --webrtc-port 5062 --routing-proxy sprout.<second install domain>:5054:50:600 --sas 0.0.0.0 --pjsip-threads 1 --worker-threads 4 -a /var/log/bono -F /var/log/bono -L 5 sprout 2747 0.3 0.4 4008468 63376 ? Sl 20:51 0:03 /usr/share/clearwater/bin/sprout --system sprout@<second install public ip> --domain <second install domain> --localhost <second install private ip> --public-host <second install private ip> --sprout-domain sprout.<second install domain> --alias sprout.<second install domain> --trusted-port 5054 --realm <second install domain> --memstore /etc/clearwater/cluster_settings --hss hs.<second install domain>:8888 --xdms homer.<second install domain>:7888 --sas 0.0.0.0 --pjsip-threads 1 --worker-threads 200 --record-routing-model pcscf --authentication -a /var/log/sprout -F /var/log/sprout -L 5 No idea why the same install would have completely different settings. Nor any idea if it is even related to the extra route header. Any insight into my issue would be helpful. Thanks Kevin Kevin Heath High Solution Architect Tropo, Inc.
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
