Below is the MAR and MAA
No. Time Source Sport Destination
Dport RawProto Protocol Length VlanId Dscp Info
91 2014-05-23 15:08:10.487038 192.168.0.144 34924 192.168.0.134
3868 TCP DIAMETER 416 0
cmd=Multimedia-AuthRequest(303) flags=RP-- appl=3GPP Cx(16777216) h2h=737ffa6
e2e=58a3be69
Frame 91: 416 bytes on wire (3328 bits), 416 bytes captured (3328 bits)
Linux cooked capture
Internet Protocol Version 4, Src: 192.168.0.144 (192.168.0.144), Dst:
192.168.0.134 (192.168.0.134)
Transmission Control Protocol, Src Port: 34924 (34924), Dst Port: diameter
(3868), Seq: 2761, Ack: 1993, Len: 348
Diameter Protocol
Version: 0x01
Length: 348
Flags: 0xc0
Command Code: 303 Multimedia-Auth
ApplicationId: 3GPP Cx (16777216)
Hop-by-Hop Identifier: 0x0737ffa6
End-to-End Identifier: 0x58a3be69
[Answer In: 93]
AVP: Session-Id(263) l=35 f=-M- val=192.168.0.144;1400817034;31
AVP: Vendor-Specific-Application-Id(260) l=32 f=-M-
AVP: Auth-Session-State(277) l=12 f=-M- val=NO_STATE_MAINTAINED (1)
AVP: Destination-Realm(283) l=19 f=-M- val=example.com
AVP: Destination-Host(293) l=21 f=-M- val=192.168.0.134
AVP: Origin-Host(264) l=21 f=-M- val=192.168.0.144
AVP: Origin-Realm(296) l=21 f=-M- val=192.168.0.144
AVP: User-Name(1) l=30 f=-M- [email protected]
AVP: Public-Identity(601) l=38 f=VM- vnd=TGPP val=sip:[email protected]
AVP: SIP-Auth-Data-Item(612) l=32 f=VM- vnd=TGPP
AVP: SIP-Number-Auth-Items(607) l=16 f=VM- vnd=TGPP val=1
AVP: Server-Name(602) l=34 f=VM- vnd=TGPP val=sip:192.168.0.144:5054
No. Time Source Sport Destination
Dport RawProto Protocol Length VlanId Dscp Info
93 2014-05-23 15:08:10.496040 192.168.0.134 3868 192.168.0.144
34924 TCP DIAMETER 224 0
cmd=Multimedia-AuthAnswer(303) flags=-P-- appl=3GPP Cx(16777216) h2h=737ffa6
e2e=58a3be69
Frame 93: 224 bytes on wire (1792 bits), 224 bytes captured (1792 bits)
Linux cooked capture
Internet Protocol Version 4, Src: 192.168.0.134 (192.168.0.134), Dst:
192.168.0.144 (192.168.0.144)
Transmission Control Protocol, Src Port: diameter (3868), Dst Port: 34924
(34924), Seq: 1993, Ack: 3109, Len: 156
Diameter Protocol
Version: 0x01
Length: 156
Flags: 0x40
Command Code: 303 Multimedia-Auth
ApplicationId: 3GPP Cx (16777216)
Hop-by-Hop Identifier: 0x0737ffa6
End-to-End Identifier: 0x58a3be69
[Request In: 91]
[Response Time: 0.009002000 seconds]
AVP: Session-Id(263) l=35 f=-M- val=192.168.0.144;1400817034;31
AVP: Origin-Host(264) l=21 f=-M- val=192.168.0.134
AVP: Origin-Realm(296) l=19 f=-M- val=example.com
AVP: Auth-Session-State(277) l=12 f=-M- val=NO_STATE_MAINTAINED (1)
AVP: Vendor-Specific-Application-Id(260) l=32 f=-M-
AVP: Result-Code(268) l=12 f=-M- val=DIAMETER_UNABLE_TO_COMPLY (5012)
-----Original Message-----
From: PS
Sent: Friday, May 23, 2014 1:17 PM
To: 'Eleanor Merry'; '[email protected]'
Subject: RE: CLearwater with OpenIMSCore HSS
Hi Ellie
Great news is the connection between Clearwate-Homestead and OpenIMSCore-HSS is
now ready, I can see CER/CEA/DWR/DWA.
Now, I am hitting another problem, the user can be registered in HSS, but when
process the MAR, it failed.
Below is the error in HSS, any idea?
Type "exit" to stop FHoSS!
2014-05-23 13:14:41,635 [Thread-12] DEBUG de.fhg.fokus.hss.main.Task -
Processing MAR!
2014-05-23 13:14:41,643 [Thread-12] ERROR de.fhg.fokus.hss.cx.op.MAR - User is
registered but has no S-CSCF name stored - HSS database consistency error
-PS
-----Original Message-----
From: PS
Sent: Friday, May 23, 2014 10:32 AM
To: 'Eleanor Merry'; [email protected]
Subject: RE: CLearwater with OpenIMSCore HSS
Hi Ellie
Thank for the reply.
I am a bit confused. Should I change the realm in Clearwater? Or should I
change in OpenIMSCore FHoSS? Can u advice? Also, where should I change in the
Clearwater if it is required?
- PS
-----Original Message-----
From: Eleanor Merry [mailto:[email protected]]
Sent: Thursday, May 22, 2014 7:55 PM
To: PS; [email protected]
Subject: RE: CLearwater with OpenIMSCore HSS
Hi Paul,
The realm in the HSS configuration file should match the home domain of your
deployment. By default on an all-in-one install this is example.com - have you
changed it to open-ims.test?
If this does match, then can you get a network capture between the Clearwater
deployment and the HSS during a register? Can you also share your
/etc/clearwater/config, and look in the homestead logs (in /var/log/homestead)
for errors?
To answer your previous questions as well:
1. I am able to build the All-in-one-images in UBUNTU, and now I tried to
configure the X-LITE to make test call, however, I am failed. I double check
the configuration, and I am abit confused what should I fill in "Server:" in
STUN configurations. Anyone can help?
You should use the aio-identity - the value of this depends on how you
installed the all-in-one image.
If you installed an All-in-One node from an Amazon AMI, then the aio-identity
is the public DNS name that EC2 has assigned to your node. This will look
something like ec2-12-34-56-78.compute-1.amazonaws.com and can be found on the
EC2 Dashboard on the "instances" panel.
If you installed an All-in-One node from an OVF image in VMPlayer or VMWare,
the aio-identity is the IP address that was assigned to the node via DHCP. You
can find this out by logging into the node's console and typing hostname -I.
If you installed an All-in-One node from an OVF in VirtualBox, the aio-identity
is 'localhost'.
2. It seems that I should follow the manual build on All-in-one-Images section,
however, I need to know what exactly need to do on step 2: "find the
preseed/late_command entry in the all-in-one image's install script - as of
writing this is as follows, but please check the linked file for the latest
version". Can anyone help to explain what is required to do?
This process takes the standard Ubuntu installation ISO and patches the install
process (the "preseed" file) to automatically install Clearwater.
Ellie
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of PS
Sent: 22 May 2014 10:43
To: PS; DURECU, OLIVIER (OLIVIER); [email protected]
Subject: Re: [Clearwater] CLearwater with OpenIMSCore HSS
The DiameterPeerHSS.xml is like below. When the SIP client trying to register
on Clearwater, I can see CER/CEA between Clearwater and OpenIMSCore_HSS, but
below error is presented on the term of OpenIMSCore_hss.
2014-05-22 17:41:00,830 INFO de.fhg.fokus.hss.main.HSSContainer - waitForExit
Type "exit" to stop FHoSS!
java.lang.Exception: Read failed
at
de.fhg.fokus.diameter.DiameterPeer.transport.Communicator.run(Communicator.java:187)
java.lang.Exception: Read failed
at
de.fhg.fokus.diameter.DiameterPeer.transport.Communicator.run(Communicator.java:187)
Alos, the SIP REGISTER request is rejected by 403 Forbidden., any idea?
<?xml version="1.0" encoding="UTF-8"?>
<!-- HSS Server config -->
<DiameterPeer
FQDN="hss.open-ims.test"
Realm="open-ims.test"
Vendor_Id="10415"
Product_Name="JavaDiameterPeer"
AcceptUnknownPeers="1"
DropUnknownOnDisconnect="1"
Tc="30"
Workers="4"
QueueLength="32"
>
<Acceptor port="3868" bind="192.168.0.134" />
<Auth id="16777216" vendor="10415"/><!-- 3GPP Cx -->
<Auth id="16777216" vendor="4491"/><!-- CableLabs Cx -->
<Auth id="16777216" vendor="13019"/><!-- ETSI/TISPAN Cx -->
<Auth id="16777216" vendor="0"/><!-- ETSI/TISPAN Cx -->
<Auth id="16777217" vendor="10415"/><!-- 3GPP Sh -->
<Auth id="16777221" vendor="10415"/>
</DiameterPeer>
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of PS
Sent: Thursday, May 22, 2014 5:30 PM
To: DURECU, OLIVIER (OLIVIER); [email protected]
Subject: Re: [Clearwater] CLearwater with OpenIMSCore HSS
HI
I am using the SVN source, so I believed it is config problem. Is it possible
to share the correct configurations?
- PS
-----Original Message-----
From: DURECU, OLIVIER (OLIVIER) [mailto:[email protected]]
Sent: Thursday, May 22, 2014 5:18 PM
To: PS; [email protected]
Subject: RE: CLearwater with OpenIMSCore HSS
Hi
A frequent error is to use the OpenIMS HSS archive found on their web site,
which is outdated
You have to check out the most recent from their SVN repo, build it and
everything should be fine
Olivier DURECU
Bell Labs / IP Platform Research
Villarceaux Center
Tel: +33(0) 160402759
GSM: +33(0) 683776482
-----Message d'origine-----
De : [email protected]
[mailto:[email protected]] De la part de PS Envoyé
: jeudi 22 mai 2014 11:13 À : [email protected]
Objet : [Clearwater] CLearwater with OpenIMSCore HSS
Hi
I am able to make test call using the All-In-One-Images, and now I would like
to extend my test on integrating the Clearwater with OpenIMSCore HSS.
I followed the instructions in the wiki, but not able to get successes, is
there anyone can provide guideline?
Thanks
PS
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/listinfo/clearwater
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/listinfo/clearwater
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/listinfo/clearwater
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/listinfo/clearwater
