I'm glad to hear your phones are now registering OK. To connect Clearwater to the PSTN, you need a SIP trunk. There are many options here.
· You may be able to get a SIP trunk directly from an upstream provider. As far as I'm aware, we've only tested with Voxbone (documented at https://github.com/Metaswitch/clearwater-docs/wiki/Voxbone). I believe this only offers inbound (not outbound) calls, but it is very easy to set up. · You may be able to get an ISUP trunk into the PSTN and then a device to interwork it with SIP. For example, for a lot of our PSTN testing, we use a Metaswitch Integrated Softswitch (http://www.metaswitch.com/products/communications-infrastructure/integrated-softswitch). · You may be able to get an ISDN trunk into the PSTN and then use something like Asterisk (with a suitable hardware adapter card) to interwork it with SIP. · (Depending on your locality, there may be other interconnection options - my experience is mainly for the US.) Which you go for depends on your requirements, but if you can get a SIP trunk directly, that may be simplest. Once you've got your SIP trunk set up, you'll need to configure ENUM (to map dialed telephone numbers to URIs) and BGCF (to control how to route the URIs). This is documented at https://github.com/Metaswitch/clearwater-docs/wiki/IBCF. I hope that helps. Matt -- Matt Williams Software Development Manager, Project Clearwater +44 (0) 20 8366 1177 From: Jik Chu [mailto:[email protected]] Sent: 11 August 2014 06:25 To: 한정현 Cc: Eleanor Merry; [email protected]; Matt Williams Subject: Re: [Clearwater] connecting to PSTN Would you tell us how to connect to PSTN? 2014. 8. 11. 오후 1:46에 "한정현" <[email protected]<mailto:[email protected]>>님이 작성: I reset password and get new one in ellis. Now, it's working. Thanks your help. Regards Han 2014-08-10 23:28 GMT+09:00 Matt Williams <[email protected]<mailto:[email protected]>>: Han, Regarding the mailing list, you should have received a confirmation email with a link you need to click - please can you check your junk mail folder in case it mistakenly got filed there? Your configuration looks correct. Please can you follow https://github.com/Metaswitch/clearwater-docs/wiki/Troubleshooting-and-Recovery#sprout to enable logging from sprout and share the logs from an attempted registration? Incidentally, it's easier if you could share network captures as .pcap files, rather than as screenshots. Thanks, Matt -- Matt Williams Software Development Manager, Project Clearwater +44 (0) 20 8366 1177 From: 한정현 [mailto:[email protected]<mailto:[email protected]>] Sent: 10 August 2014 12:55 To: Matt Williams Cc: Eleanor Merry; [email protected]<mailto:[email protected]>; Jik Chu Subject: Re: [Clearwater] Hi i subscribed mailing list and waiting approve. I reset password as attached file ellis.png I changed softphone from x-lite to zoiper and change configuration as attached file zoiper.png Still i can't register softphone due to 401 Unauthorized Error. I double check password. Regards Han 2014-08-10 15:36 GMT+09:00 Matt Williams <[email protected]<mailto:[email protected]>>: Han, First, please can you sign up to the Clearwater mailing list (http://lists.projectclearwater.org/listinfo/clearwater)? This means your posts will be accepted immediately, rather than having to be approved by an admin. Also, it means you will see the other activity on the mailing list, which may help you with problems you're hitting. I think the primary issue you're hitting is that your domain and SIP authorization name are wrong. To get this to work, you'll also need to switch to configure a proxy and switch to Zoiper. • The domain must match the home domain configured on Clearwater. For an all-in-one image, it is "example.com<http://example.com>" - unless you've changed that, you need to set the domain in X-Lite to "example.com<http://example.com>" too. • By default, the authorization name is of the form "<username>@<homedomain>". Please can you set your authorization username to "[email protected]<mailto:[email protected]>" (without the double-quotes). • After changing the domain to example.com<http://example.com>, your SIP client will attempt to contact example.com<http://example.com> rather than your Clearwater instance at 192.168.0.7. You'll need to configure a proxy for this. • Unfortunately, X-Lite's proxy configuration only applies to the first request in a dialog. Zoiper applies proxy configuration to all requests, and so is the recommended client for testing with all-in-one nodes. This is documented at • https://github.com/Metaswitch/clearwater-docs/wiki/Making%20your%20first%20call#configure-your-client (SIP configuration) • https://github.com/Metaswitch/clearwater-docs/wiki/All-in-one-OVF-Installation#running-and-using-the-image (proxy) • https://github.com/Metaswitch/clearwater-docs/wiki/Making%20your%20first%20call#prerequisites (Zoiper requirement for all-in-one nodes). It's worth familiarizing yourself with those. I hope that helps. Thanks, Matt From: 한정현 [mailto:[email protected]<mailto:[email protected]>] Sent: 10 August 2014 06:31 To: Matt Williams Cc: Eleanor Merry; [email protected]<mailto:[email protected]>; Jik Chu Subject: Re: [Clearwater] Hi I have a problem to register x-lite softphone to clearwater. After install all-in-one image and open web browser, clearwater ip is 192.168.0.7, softphone ip is 192.168.0.6 After login ellis, create client as attached file ellis1.png. open xlite client and create account as attached file xlite xlite issue Register packet to clearwater, clearwater answer 403 Forbidden as attached file capture1 and capture2. what do i check to register softphone ? Regards Han 2014-08-09 12:49 GMT+09:00 Jik Chu <[email protected]<mailto:[email protected]>>: OK, Han is ready to make first call. Could you explain to him how to connect 3G and 4G phones? 2014. 8. 8. 오후 5:51에 "Eleanor Merry" <[email protected]<mailto:[email protected]>>님이 작성: Hi, Your password has been rejected as it’s too easy to guess (see the red error text for a description). As background, we use zxcvbn (https://github.com/dropbox/zxcvbn) to test the password strength. This detects ~10,000 common passwords, common American names and surnames, common English words, and common patterns like dates, repeats (aaa), sequences (abcd), and QWERTY patterns. Can you enter a password that meets the requirements in the Password box (and the same password in the Confirm Password box) and retry? The red error text gives a list of ways to increase password strength (e.g. adding numbers or symbols). Ellie From: 한정현 [mailto:[email protected]<mailto:[email protected]>] Sent: 08 August 2014 09:03 To: Eleanor Merry Cc: Jik Chu; Matt Williams Subject: Re: [Clearwater] Hi Thanks When i fill up sigh up page with signup code, then " sighup" button change disable mode. still can not login. Regards Han 2014-08-08 16:14 GMT+09:00 Matt Williams <[email protected]<mailto:[email protected]>>: Han, The signup code for the all-in-one image is "secret" (without the double-quotes). See https://github.com/Metaswitch/clearwater-docs/wiki/All-in-one%20OVF%20Installation#running-and-using-the-image for more details. I hope that helps. Matt -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of ??? Sent: 08 August 2014 06:33 To: Eleanor Merry Cc: Jik Chu; [email protected]<mailto:[email protected]> Subject: Re: [Clearwater] Hi Thanks. I installed All-in-one image to VirtualBox 4.3.12. To create SIP user to clearwater, i loged in Ellis server by web browser as attached file(login file). It is first time to login. So i need username,password to log-in. next, select "sign-up" and fill out next signup screen except signup code. According to document," Sign up as a new user, using the signup code you set as signup_key when configuring your deployment <https://github.com/Metaswitch/clearwater-docs/wiki/Installing%20a%20Chef%20client#add-deployment-specific-configuration>." . How can i get sign up code ? There is no ~/.chef/knife.rb file. all-in-one image. Regards Han 2014-08-08 11:31 GMT+09:00 Jik Chu <[email protected]<mailto:[email protected]>>: > Hi, > We've solved the problem according to your suggestion. Thanks. > Now, could you tell us how to register new subscriber and make a call? > 2014. 8. 7. 오후 9:57에 "Eleanor Merry" > <[email protected]<mailto:[email protected]>>님이 작성: > > Hi, >> >> >> >> This looks like a problem with VirtualBox - please see >> https://forums.virtualbox.org/viewtopic.php?f=6&t=62615. >> >> This forum suggests various workarounds to fix the problem, and links >> to a new virtual box build (v4.3.15, build 95286). >> >> >> >> Also, can you please sign up to the mailing list at >> http://lists.projectclearwater.org/listinfo/clearwater. This means >> that your emails will be posted immediately, rather than requiring >> authorization. >> >> >> >> Hope this helps, >> >> >> >> Ellie >> >> >> >> *From:* 한정현 [mailto:[email protected]<mailto:[email protected]>] >> *Sent:* 07 August 2014 13:30 >> *To:* Eleanor Merry >> *Cc:* >> [email protected]<mailto:[email protected]>; >> jik chu >> *Subject:* Re: [Clearwater] Hi >> >> >> >> Thanks your reply. >> >> >> >> I use window 7 64bit OS and install oracle Virtual Box 4.3.14. >> >> Also i got cw-aio.ova.ova (all-in-one image) from project cw site. >> >> After runing Virtual box, when i import cw-aio package, Virtual box >> display Error message as attached file. >> >> >> >> What is wrong ? >> >> Regards >> >> Han >> >> >> >> 2014-08-07 20:31 GMT+09:00 Jik Chu >> <[email protected]<mailto:[email protected]>>: >> >> If you use Teamviewer I can show you where screen went dark. >> >> 2014. 8. 7. 오후 8:30에 "Jik Chu" <[email protected]<mailto:[email protected]>>님이 >> 작성: >> >> >> >> Hi, >> >> I used all in one with V node. After installation no screen popped up. >> >> We are to demo to large carrier enterprise group on Monday. Could you >> down load a set up platform with simple TAS. >> >> THANKS >> >> Hi, >> >> Can you give me more details about what went wrong? >> - What install method did you use (e.g. all-in-one install on >> Virtual Box/all-in-one install on EC2/manual install with individual >> nodes...)? >> - Where in the install process did the screen go dark? >> - Are you still able to access the node? >> >> Thanks, >> >> Ellie >> >> >> -----Original Message----- >> From: >> [email protected]<mailto:[email protected]> >> [mailto: >> [email protected]<mailto:[email protected]>] >> On Behalf Of Jik Chu >> Sent: 07 August 2014 04:50 >> To: >> [email protected]<mailto:[email protected]> >> Subject: [Clearwater] Hi >> >> I installed everything, but screen went dark. >> _______________________________________________ >> Clearwater mailing list >> [email protected]<mailto:[email protected]> >> http://lists.projectclearwater.org/listinfo/clearwater >> >> >> > _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
