Hi Ellie, I have noticed that myself earlier on today. Its very strange, I don't know of a reason for this to happen.
I will be conducting more tests tomorrow (turning off all forwarding rules currently set up on ellis just in case this is causing some strange behaviour). Once I have conducted this further testing I will get back to you. Thanks for your help, Gareth On Thu, Dec 18, 2014 at 7:27 PM, Eleanor Merry <[email protected] > wrote: > > Hi Gareth, > > > > There’s something a bit strange going on in the log you’ve sent across. > > > > - The audio only invite is sent from 6505550374 to 6505550154, > and is 200 OK’d and ACK’d > > - The caller binding that’s part of the call then deregisters, > and immediately re-registers (with a different rinstance) > > - The callee then sends a BYE. This looks like it’s routed > correctly to the caller binding, but the client doesn’t receive it. > > > > I think the client should accept the BYE in this situation. Do you know > why there’s an active deregister and reregister in the middle of the call? > > > > Ellie > > > > *From:* Gary Penfold [mailto:[email protected]] > *Sent:* 15 December 2014 17:10 > *To:* Eleanor Merry > *Subject:* Re: [Clearwater] Chat to video > > > > Hi Ellie, > > > > I can confirm that a normal call lasts longer than 30 seconds, as well as > calls to my conferencing application server. > > > > Please find the bono debug logs attached. Let me know if there is anything > else that you think would be useful. > > > > Thanks for your time, > > > > Gareth > > > > On Fri, Dec 12, 2014 at 2:53 PM, Eleanor Merry < > [email protected]> wrote: > > Hi Gareth, > > It sounds like the route set on the ACK may be wrong. Can you check > whether a standard voice call stays up for more than 30 seconds? > > Can you also send the debug logs for this call over? I'd like to see the > logs on Bono (in /var/log/bono/bono*). You can turn on debug logging by > creating/editing the file /etc/clearwater/user_settings, adding log_level=5 > and then restarting Bono (service bono stop - it's automatically restarted > by monit). > > Ellie > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Gary Penfold > Sent: 10 December 2014 19:42 > To: [email protected] > Subject: [Clearwater] Chat to video > > Hi, > > I previously had an all in one image of clearwater running locally on > virtual box with port forwarding enabled. > > Using this I created a local wireless hosted network. Connecting to this > network with two devices and zoiper clients I was able to seamlessly > transition between a voice call and a video call. > > I have now redeployed my clearwater all in one image in a virtual network > to allow me to do some testing. Clearwater uses a static IP of 10.0.2.15 > (the default of the image on the previous deployment). > > I have managed to connect my devices to clearwater and am able to use the > messaging, call and my configured application server facilities. > > However, when I switch from call to video the devices will not publish the > video feed to one another. In addition to this the client that initiated > the video call will eventually hang up due to attempting to use video. > > I suspect that when I changed my deployment additional configuration was > needed to clearwater. Please could you advise on what the potential issue > may be? and how to would be able to fix it? > > If more details are required please get back to me with what information > would be useful. > > Thanks for your time, > > Gareth Penfold > _______________________________________________ > Clearwater mailing list > [email protected] > http://lists.projectclearwater.org/listinfo/clearwater > _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
