Hi Ashish, You’ll need to set the authentication type in the HSS.
We’ve not tested with the developing solutions HSS emulator before, so I can’t help you with the reference file I’m afraid. We’ve tested with OpenIMSCore HSS (which is open source), and a couple of other vendors. We also use seagull (http://gull.sourceforge.net/index.html) for emulation. If you have Sprout running as an I-CSCF, then it will make LIRs/UARs to Homestead/HSS. If you don’t need an I-CSCF, then you can disable this in Sprout by removing the option icscf=<port> from /etc/clearwater/config, and restarting Sprout (sudo service sprout stop – it’ll be automatically restarted by monit) Ellie From: ashish maheshwari [mailto:[email protected]] Sent: 29 January 2015 16:39 To: Eleanor Merry Cc: [email protected]; [email protected] Subject: Re: [Clearwater] First Call IMS Registration while using External HSS Hi Ellie, I had defined IMPI and IMPU in HSS, but can you please elaborate me where I need to set it to use SIP digest authentication its something I need to configure in HSS or in IMS. I am integrating IMS with Devsol HSS , In HSS side we need to do the modification in attached xml that we build for SWx(towards AAA) and Cx(towards IMS) so that same HSS can be used over both interfaces for authentication. I hope CW integrated with devsol HSS previously so many times , it would be kind if you have a look on the attached reference file and also suggest what are the changes required to make the successful IMS call. One more query in /etc/clearwater/config i can see same IP has been given to ICSCF and SCSCF so I believe we had given static IP for ICSCF and SCSCF so while registering there won;t be need of diameter message like UAR/UAA which gives IP of SCSCF address. Thanks And Regards, Ashish Maheshwari +91-8971622622 On Thursday, 29 January 2015 12:53 AM, Eleanor Merry <[email protected]<mailto:[email protected]>> wrote: Hi Ashish, I'd expect you to create a public user identity (IMPU) in the HSS, e.g. sip:[email protected]<mailto:[email protected]>). You then need to add an associated private identity (IMPI), e.g. [email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>>. When you create this you should set it to use SIP digest authentication (or AKA if your P-CSCF supports this - note that Bono does not), and you should also be able to set the password here. You should then use the private identity as the authentication username, and the password you've set above. You can set the auth. username separately in the Preferences tab in Zoiper - please see http://www.zoiper.com/en/documentation/linux-installation-and-configuration#preferences Ellie From: Ashish Maheshwari -X (ashimahe - L & T TECHNOLOGY SERVICES LIMITED at Cisco) [mailto:[email protected]<mailto:[email protected]>] Sent: 28 January 2015 12:57 To: [email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>>; Eleanor Merry Cc: Chinna Morampalle (cmorampa) Subject: First Call IMS Registration while using External HSS Hi Team, I have integrated external HSS(not ellis) with CW IMS and now I want to register the subscriber in IMS. I defined used IMSI in HSS and trying to register the subscriber. I am using Zoiper Sip client where I need to give few things like Username, password, outbound proxy etc. As I am not using Ellis, else using real HSS in this case what value shall I need to use in "password" and "Username" in Zoiper initially. I believe user name should be [email protected]<mailto:[email protected]><mailto:[email protected]<mailto:[email protected]>> if not please suggest reg both password and Username. Thanks in advance.... Thanks & Regards, Ashish Maheshwari _______________________________________________ Clearwater mailing list [email protected]<mailto:[email protected]> http://lists.projectclearwater.org/listinfo/clearwater _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
