Hi Ashish, We've not explicitly tested with Vimphone. It's based on linphone, which we have seen working, so I'd hope it might work (if it can be configured appropriately). Can you send me the debug logs of a registration attempt, and I'll have a look over it.
For your other issues, please can you send me the debug logs for the calls: - For issue 1: Can you please send me the Sprout and Bono debug logs covering from a successful registration to a de-register, and the number of the subscriber being registered (so it's easier to interpret the logs). - For issue 2. Can you please send me the Sprout debug logs covering a call from UE1 -> UE2, and the numbers of the three subscribers. Ellie From: Ashish Maheshwari -X (ashimahe - L & T TECHNOLOGY SERVICES LIMITED at Cisco) [mailto:[email protected]] Sent: 13 February 2015 14:07 To: Eleanor Merry; [email protected] Cc: Chinna Morampalle (cmorampa) Subject: Issues facing while making call CW IMS and Zoiper as SIP client Hi Ellie/Team, We are testing VoWiFi call using CW IMS, we used Zoiper as a SIP client to make a voice call from our real android UEs and we observe that the voice quality is very bad and MOS score fluctuating between 2.4- 3.2 and there was a significant delay in voice I tried to use Vim sip client and tried to configure with the procedure mention at your website but registration got failed. I would like to know whether CW IMS supports Vim sip client or not and what are other SIP clients that are supported which can be used to make VoWiFI call using real android UEs as we want rule out the possibility of poor voice quality because of zoiper. Few other issues I faced : 1. Registration failing very frequently, means the same account configured in Zoiper registered successfully and after some time automatically de register . Can you please suggest some workaround to resolve this issue, any timer is there ??? 2. Configured three different Zoiper account in three different UEs with unique IMSIs but while making a call from UE1 to UE2, call is landing to both UE2 and UE3 i.e. strange . Please suggest some workaround for this. Note : We installed CW IMS as all in one OVF installation. Thanks in advance ... Thanks & Regards, Ashish Maheshwari _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
