Hi Ellie,
As per your suggestion, we have modified the db.example.com file for DNS
settings.
PFA the same. ( Note: The same file has been copied to all the machines at
location /etc/bind/db.example.com)
There is a confusion here. We have given the hostnames in
/etc/clearwater/config as ellis, bono, sprout and so on.. But the names in
db.example.com are ellis-1, bono-1, sprout-1..
Do we need to make both these names same ?
To ensure DNS is configured properly , we tried to ping bono from ellis
using "ping bono" , but this didn't work. Any pointers for the same will
be a great help.
Regards,
Prerna Pandit
Tata Consultancy Services Limited
Mailto: [email protected]
Website: http://www.tcs.com
____________________________________________
Experience certainty. IT Services
Business Solutions
Consulting
____________________________________________
From: Eleanor Merry <[email protected]>
To: Prerna Pandit <[email protected]>
Cc: clearwater <[email protected]>, Pundalik K
<[email protected]>
Date: 20-02-2015 19:22
Subject: RE: [Clearwater] Fw: Trouble installing Ellis(Manual
Install)(ScanMail has removed a file)
Hi Prerna,
Have you set up the Homestead and Homer nodes, and added them to DNS? You
do need to do this before you can provision the subscribers through Ellis.
Also, your DNS settings for sprout/bono don?t look quite right. You have
multiple entries for each type of node (e.g. there?s a sprout-1 and a
sprout-2), but I think you only have one of each type, and there?s also
dummy IPv6 entries. You should remove the extra entries; for example
?sprout.example.com? will currently resolve to 192.168.1.3, 3.0.0.2 3::1
and 3::2, and you only want 192.168.1.3.
Ellie
From: Prerna Pandit [mailto:[email protected]]
Sent: 20 February 2015 11:43
To: Eleanor Merry
Cc: clearwater; Pundalik K
Subject: Re: [Clearwater] Fw: Trouble installing Ellis(Manual
Install)(ScanMail has removed a file)
Re-attaching the file (db.example.com)
Regards,
Prerna Pandit
Tata Consultancy Services Limited
Mailto: [email protected]
Website: http://www.tcs.com
____________________________________________
Experience certainty. IT Services
Business Solutions
Consulting
____________________________________________
[email protected] wrote: -----
To: [email protected]
From: Prerna Pandit
Sent by: [email protected]
Date: 02/20/2015 05:04PM
Cc: clearwater <[email protected]>, Pundalik K <
[email protected]>
Subject: Re: [Clearwater] Fw: Trouble installing Ellis(Manual
Install)(ScanMail has removed a file)
To add on to the previous email,
We have configured the DNS using BIND.
PFA the DNS configuration file (/etc/bind/db.example.com).
Regards,
Prerna Pandit
Tata Consultancy Services Limited
Mailto: [email protected]
Website: http://www.tcs.com
____________________________________________
Experience certainty. IT Services
Business Solutions
Consulting
____________________________________________
[email protected] wrote: -----
To: [email protected]
From: Prerna Pandit
Sent by: [email protected]
Date: 02/20/2015 04:59PM
Cc: Pundalik K <[email protected]>, clearwater <
[email protected]>
Subject: Re: [Clearwater] Fw: Trouble installing Ellis(Manual Install)
Hi Ellie,
Thanks for your help.
We are able to install and configure three nodes vis - Ellis, Bono ,
Sprout on one laptop with Ellis on host and Bono and Sprout on two VMs.
Later we configured the DNS for Ellis node and tried launching the GUI
using "http://ellis.example.com";.
We signed up as a new user and signup-code being "secret" from the
/etc/clearwater/config file.
But it didn't successfully launched giving the error as in the attachment.
Following is the syslog output:
Feb 20 16:39:01 ellis CRON[29250]: (root) CMD (/usr/lib/sysstat/sadc 1 1
/var/log/sysstat/clearwater-sa`date +%d`)
Feb 20 16:39:20 ellis kernel: [16390.223708] Program lshw tried to access
/dev/mem between ff000->101000.
Feb 20 16:40:01 ellis CRON[29619]: (root) CMD (/usr/lib/sysstat/sadc 1 1
/var/log/sysstat/clearwater-sa`date +%d`)
Feb 20 16:40:20 ellis kernel: [16450.186018] Program lshw tried to access
/dev/mem between ff000->101000.
Feb 20 16:41:01 ellis CRON[30009]: (root) CMD (/usr/lib/sysstat/sadc 1 1
/var/log/sysstat/clearwater-sa`date +%d`)
Feb 20 16:41:20 ellis kernel: [16510.285771] Program lshw tried to access
/dev/mem between ff000->101000.
Feb 20 16:42:01 ellis CRON[30381]: (root) CMD (/usr/lib/sysstat/sadc 1 1
/var/log/sysstat/clearwater-sa`date +%d`)
Feb 20 16:42:20 ellis kernel: [16570.341833] Program lshw tried to access
/dev/mem between ff000->101000.
Feb 20 16:43:01 ellis CRON[30760]: (root) CMD (/usr/lib/sysstat/sadc 1 1
/var/log/sysstat/clearwater-sa`date +%d`)
Feb 20 16:43:20 ellis kernel: [16630.322536] Program lshw tried to access
/dev/mem between ff000->101000.
Feb 20 16:43:51 ellis named[26764]: error (network unreachable) resolving
'ns1.p16.dynect.net/A/IN': 2001:500:1::803f:235#53
Feb 20 16:43:51 ellis named[26764]: error (network unreachable) resolving
'ns1.p16.dynect.net/AAAA/IN': 2001:500:1::803f:235#53
Feb 20 16:43:51 ellis named[26764]: error (network unreachable) resolving
'ns3.p16.dynect.net/A/IN': 2001:500:1::803f:235#53
Feb 20 16:43:51 ellis named[26764]: error (network unreachable) resolving
'./NS/IN': 2001:500:1::803f:235#53
Feb 20 16:43:51 ellis named[26764]: error (network unreachable) resolving
'ns2.p16.dynect.net/A/IN': 2001:500:1::803f:235#53
Feb 20 16:43:52 ellis named[26764]: error (network unreachable) resolving
'ns3.p16.dynect.net/AAAA/IN': 2001:500:90::100#53
Feb 20 16:43:53 ellis named[26764]: error (network unreachable) resolving
'ns1.p03.dynect.net/A/IN': 2001:500:94::100#53
Feb 20 16:43:53 ellis named[26764]: error (network unreachable) resolving
'ns1.p03.dynect.net/AAAA/IN': 2001:500:94::100#53
Feb 20 16:43:54 ellis named[26764]: error (network unreachable) resolving
'cs9.wac.edgecastcdn.net/A/IN': 2606:2800:1::6#53
Regards,
Prerna Pandit
Tata Consultancy Services Limited
Mailto: [email protected]
Website: http://www.tcs.com
____________________________________________
Experience certainty. IT Services
Business Solutions
Consulting
____________________________________________
From: Eleanor Merry <[email protected]>
To: Prerna Pandit <[email protected]>
Cc: clearwater <[email protected]>, Pundalik K <
[email protected]>
Date: 19-02-2015 00:15
Subject: RE: [Clearwater] Trouble installing Ellis(Manual Install)
Hi Prerna,
Only the IP addresses and the public hostname need to change between
nodes.
So you should update the local_ip, public_ip and public_hostname values,
and the local IP address in the chronos_hostname value to be Bono?s
address instead of Ellis.
You do not need to change the ellis_api_key. This parameter is only used
by Ellis, and will be ignored by Bono. We keep it in the main
configuration file to make it easier to share the same configuration file
between all your nodes.
Ellie
From: Prerna Pandit [mailto:[email protected]]
Sent: 18 February 2015 11:32
To: Eleanor Merry
Cc: clearwater; Pundalik K
Subject: RE: [Clearwater] Trouble installing Ellis(Manual Install)
Hi Ellie,
Thanks for the response.
We are now trying to install the next node-Bono. We have some doubts
regarding the changes required in config file (/etc/clearwater/config).
How will it be different from that of Ellis?
For Ellis we have used the below config :
# Deployment definitions /* Do we need to change any parameter here ? */
home_domain=example.com
sprout_hostname=sprout.example.com
chronos_hostname=192.168.1.1:7253
hs_hostname=hs.example.com:8888
hs_provisioning_hostname=hs.example.com:8889
ralf_hostname=ralf.example.com:10888
xdms_hostname=homer.example.com:7888
# Local IP configuration /* IP address and hostname will be of the new
node Bono ? */
local_ip=192.168.1.1
public_ip=192.168.1.1
public_hostname=Ellis
# Email server configuration
smtp_smarthost=<smtp server>
smtp_username=<username>
smtp_password=<password>
[email protected]
# Keysÿ/* Will the keywords ellis_api_key be replaced with something like
bono_api_key ? */
signup_key="secret"
turn_workaround="secret"
ellis_api_key="secret"
ellis_cookie_key="secret"ÿ
Regards,
Prerna Pandit
Tata Consultancy Services Limited
Mailto: [email protected]
Website: http://www.tcs.com
____________________________________________
Experience certainty. ÿ ÿ ÿ ÿIT Services
ÿÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Business Solutions
ÿÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ Consulting
____________________________________________ÿ
From: ÿ ÿ ÿ ÿEleanor Merry <[email protected]>ÿ
To: ÿ ÿ ÿ ÿPundalik K <[email protected]>?
Cc: ? ? ? ?Prerna Pandit <[email protected]>, clearwater <
[email protected]>?
Date: ? ? ? ?17-02-2015 23:44?
Subject: ? ? ? ?RE: [Clearwater] Trouble installing Ellis(Manual Install)?
Hi Pundalik,
ÿ?
local_ip and public_ip can be the same. The local_ip should be the IP
address that the node can use to communicate with the other Clearwater/IMS
core components. The public_ip is used by Bono and Ellis nodes, and it
should be set to an IP address that/?s accessible to external clients
(e.g. SIP clients for Bono, web browsers for Ellis) /? if these are the
same then that is fine.
ÿ?
The public_hostname should be a hostname that resolves to the public_ip /?
if you don/?t have one then this should be set to the same value as the
public IP.
ÿ?
Email server configuration is not mandatory, and can be configured later.
ÿ?
Ellie?
ÿ?
From:?Pundalik K [mailto:[email protected]]
Sent:?17 February 2015 12:32
To:?Eleanor Merry
Cc:?Prerna Pandit; clearwater
Subject:?RE: [Clearwater] Trouble installing Ellis(Manual Install)?
ÿ?
Hi Ellie,
I am working along with Prerna to setup clearwater IMS.
Based on your guidelines, we upgraded the machine to ubuntu 12.04 64-bit
and later tried installing one of the image (Ellis for now). The
installation now succeeds without any errors. Thanks.
As we are following the Manual way to install and test Clearwater on 6
machines, have certain queries w.r.t. /etc/clearwater/config file which
needs to be configured on each machine/image.
Example entries that we have configured are as given below (highlighted in
bold). As this is our local setup, can local_ip?& public_ip?be same? Is
Email server configuration mandatory or can it be configured later? Will
the <zone> remain same across all machines? Please guide with the config
so we can proceed accordingly
# Deployment definitions
home_domain=example.com
sprout_hostname=sprout.example.com
chronos_hostname=192.168.1.1:7253
hs_hostname=hs.example.com:8888
hs_provisioning_hostname=hs.example.com:8889
ralf_hostname=ralf.example.com:10888
xdms_hostname=homer.example.com:7888
# Local IP configuration
local_ip=192.168.1.1
public_ip=192.168.1.1
public_hostname=Ellis
# Email server configuration
smtp_smarthost=<smtp server>
smtp_username=<username>
smtp_password=<password>
[email protected]
# Keys
signup_key="secret"
turn_workaround="secret"
ellis_api_key="secret"
ellis_cookie_key="secret"
Regards,
Pundalik Kandolcar
Tata Consultancy Services
Mailto: [email protected]
Website: http://www.tcs.com
____________________________________________
Experience certainty. IT Services
Business Solutions
Consulting
____________________________________________
-----Eleanor Merry <[email protected]>?wrote: -----?
To: Prerna Pandit <[email protected]>
From: Eleanor Merry <[email protected]>
Date: 02/17/2015 12:56AM
Cc: clearwater <[email protected]>, Pundalik K <
[email protected]>
Subject: RE: [Clearwater] Trouble installing Ellis(Manual Install)?
Hi Prerna,
ÿ?
Clearwater was built from the ground up for virtualization /? you
absolutely don/?t need to have separate physical machines. You could run
all the nodes on one machine if you wished!?
ÿ?
That said /? your laptops are a bit underpowered if you want to put load
through Clearwater (e.g. we recommend a minimum of 1.7GB of memory for
each node). If you are just testing the setup this should be fine though
(you may also be interested in are all-in-one node /? please see
https://github.com/Metaswitch/clearwater-docs/wiki/All-in-one-Images?for
more details).
ÿ?
Ellie?
ÿ?
From:?Prerna Pandit [mailto:[email protected]]
Sent:?16 February 2015 07:22
To:?Eleanor Merry
Cc:?clearwater; Pundalik K
Subject:?RE: [Clearwater] Trouble installing Ellis(Manual Install)?
ÿ?
Yes, I was running it on a 32 bit machine. Thanks Ellie for pointing the
same.?
One more question -?
We are trying to setup the entire clearwater IMS. Due to hardware
limitations, we are planning to take two laptops and setup 3 nodes on
each.?
Two VMs and one host on each. This way we'll be able to setup the six
images on two machines(ubuntu 64 bit server) .?
Note: Current Laptop configuration - intel i5 processor-2.5GHz, Memory
4GB?
Question is - Will the aforesaid setup work ? Or we will need 6 separate
machines only ?
Regards,
Prerna Pandit
Tata Consultancy Services Limited
Mailto: [email protected]
Website: http://www.tcs.com
____________________________________________
Experience certainty. ? ? ? ?IT Services
ÿ? ? ? ? ? ? ? ? ? ? ?Business Solutions
ÿ? ? ? ? ? ? ? ? ? ? ?Consulting
____________________________________________?
From: ? ? ? ?Eleanor Merry <[email protected]>?
To: ? ? ? ?Prerna Pandit <[email protected]>?
Cc: ? ? ? ?clearwater <[email protected]>?
Date: ? ? ? ?13-02-2015 01:41?
Subject: ? ? ? ?RE: [Clearwater] Trouble installing Ellis(Manual Install)?
Hi Prerna,
ÿ
I/?ve tried downloading from the stable repository, and I can get the
Ellis package. Can you retrieve any of the clearwater packages? Does
running apt-get update report any errors??
ÿ
You can hit this symptom if you/?re running the a 32bit machine rather
than a 64bit (we only support 64bit). You can test this by running /?uname
/?a/? on your machine.
ÿ
Ellie?
ÿ
From:?Prerna Pandit [mailto:[email protected]]
Sent:?11 February 2015 08:23
To:?Eleanor Merry
Cc:?clearwater
Subject:?RE: [Clearwater] Trouble installing Ellis(Manual Install)?
ÿ
Hi Ellie,?
Thanks for responding.
The repository set in?/etc/apt/sources.list.d/clearwater.list-?"deb
http://repo.cw-ngv.com/stable?binary/";.?
And yes I am following the same link which you have given.?
Prerna Pandit
Tata Consultancy Services Limited
Mailto: [email protected]
Website: http://www.tcs.com?;
____________________________________________
Experience certainty. ? ? ? ?IT Services
ÿ? ? ? ? ? ? ? ? ? ? Business Solutions
ÿ? ? ? ? ? ? ? ? ? ? Consulting
____________________________________________?
From: ? ? ? ?Eleanor Merry <[email protected]>?
To: ? ? ? ?Prerna Pandit <[email protected]>, clearwater <
[email protected]>?
Date: ? ? ? ?11-02-2015 00:17?
Subject: ? ? ? ?RE: [Clearwater] Trouble installing Ellis(Manual Install)?
Hi Prerna,
What repository have you got set in
/etc/apt/sources.list.d/clearwater.list?
There are a number of steps you need to do on the machine before you
install the node-specific software - have you followed the steps at
https://github.com/Metaswitch/clearwater-docs/wiki/Manual%20Install#bootstrapping-the-machines??These
cover configuring the APT sources, and setting up the configuration file
on the node.
Ellie
-----Original Message-----
From: [email protected]?[
mailto:[email protected]] On Behalf Of Prerna
Pandit
Sent: 10 February 2015 10:36
To: clearwater
Subject: [Clearwater] Trouble installing Ellis(Manual Install)
Hello,
We are trying to install clearwater IMS by following steps from "
https://github.com/Metaswitch/clearwater-docs/wiki/Manual%20Install";.
Following is the error observed .
root@tcs:/home/tcs# sudo DEBIAN_FRONTEND=noninteractive apt-get install
ellis --yes Reading package lists... Done Building dependency tree Reading
state information... Done
E: Unable to locate package ellis
Kindly throw some light on how to resolve the same.
Regards,
Prerna Pandit
Tata Consultancy Services Limited
Mailto: [email protected]
Website: http://www.tcs.com
____________________________________________
Experience certainty. ? ? ? ? ? ? ? ? IT Services
ÿ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Business Solutions
ÿ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Consulting
____________________________________________
=====-----=====-----=====
Notice: The information contained in this e-mail message and/or
attachments to it may contain confidential or privileged information. If
you are not the intended recipient, any dissemination, use, review,
distribution, printing or copying of the information contained in this
e-mail message and/or attachments to it are strictly prohibited. If you
have received this communication in error, please notify us by reply
e-mail or telephone and immediately and permanently delete the message and
any attachments. Thank you
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/listinfo/clearwater?;
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/listinfo/clearwater
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/listinfo/clearwater
$TTL 5m ; Default TTL
; SOA, NS and A record for DNS server itself
@ 3600 IN SOA ns admin ( 2014010800 ; Serial
3600 ; Refresh
3600 ; Retry
3600 ; Expire
300 ) ; Minimum TTL
@ 3600 IN NS ns
ns 3600 IN A 1.0.0.1 ; IPv4 address of BIND server
ns 3600 IN AAAA 1::1 ; IPv6 address of BIND server
; bono
; ====
;
; Per-node records - not required to have both IPv4 and IPv6 records
bono-1 IN A 192.168.1.2
;
; Cluster A and AAAA records - UEs that don't support RFC 3263 will simply
; resolve the A or AAAA records and pick randomly from this set of addresses.
@ IN A 192.168.1.2
;
; NAPTR and SRV records - these indicate a preference for TCP and then resolve
; to port 5060 on the per-node records defined above.
@ IN NAPTR 1 1 "S" "SIP+D2T" "" _sip._tcp
@ IN NAPTR 2 1 "S" "SIP+D2U" "" _sip._udp
_sip._tcp IN SRV 0 0 5060 bono-1
_sip._udp IN SRV 0 0 5060 bono-1
; sprout
; ======
;
; Per-node records - not required to have both IPv4 and IPv6 records
sprout-1 IN A 192.168.1.3
;
; Cluster A and AAAA records - P-CSCFs that don't support RFC 3263 will simply
; resolve the A or AAAA records and pick randomly from this set of addresses.
sprout IN A 192.168.1.3
;
; NAPTR and SRV records - these indicate TCP support only and then resolve
; to port 5054 on the per-node records defined above.
sprout IN NAPTR 1 1 "S" "SIP+D2T" "" _sip._tcp.sprout
_sip._tcp.sprout IN SRV 0 0 5054 sprout-1
;
; Per-node records for I-CSCF (if enabled) - not required to have both
; IPv4 and IPv6 records
;
; Cluster A and AAAA records - P-CSCFs that don't support RFC 3263 will simply
; resolve the A or AAAA records and pick randomly from this set of addresses.
icscf.sprout IN A 3.0.0.3
icscf.sprout IN AAAA 3::3
;
; NAPTR and SRV records for I-CSCF (if enabled) - these indicate TCP
; support only and then resolve to port 5052 on the per-node records
; defined above.
icscf.sprout IN NAPTR 1 1 "S" "SIP+D2T" "" _sip._tcp.icscf.sprout
_sip._tcp.icscf.sprout IN SRV 0 0 5052 sprout-3
; homestead
; =========
;
; Per-node records - not required to have both IPv4 and IPv6 records
homestead-1 IN A 192.168.1.5
;
; Cluster A and AAAA records - sprout picks randomly from these.
hs IN A 192.168.1.5
;
; (No need for NAPTR or SRV records as homestead doesn't handle SIP traffic.)
; homer
; =====
;
; Per-node records - not required to have both IPv4 and IPv6 records
homer-1 IN A 192.168.1.4
;
; Cluster A and AAAA records - sprout picks randomly from these.
homer IN A 192.168.1.4
;
; (No need for NAPTR or SRV records as homer doesn't handle SIP traffic.)
; ralf
; =====
;
; Per-node records - not required to have both IPv4 and IPv6 records
ralf-1 IN A 192.168.1.6
;
; Cluster A and AAAA records - sprout and bono pick randomly from these.
ralf IN A 192.168.1.6
;
; (No need for NAPTR or SRV records as ralf doesn't handle SIP traffic.)
; ellis
; =====
;
; ellis is not clustered, so there's only ever one node.
;
; Per-node record - not required to have both IPv4 and IPv6 records
ellis-1 IN A 192.168.1.1
;
; "Cluster"/access A and AAAA record
ellis IN A 192.168.1.1
_______________________________________________
Clearwater mailing list
[email protected]
http://lists.projectclearwater.org/listinfo/clearwater
