And maybe an additional question with regards to Metaswitch's Perimeta P-CSCF/IBCF - is there any non commercial version available (time limited, feature limted, etc.) to have it installed and integrated with Clearwater?
Piotr Kurpiel [email protected] +48602206891 On Wed, Apr 8, 2015 at 8:09 AM, Piotr Kurpiel <[email protected]> wrote: > Hi Matt, thanks for your response. > It's clear that P-CSCF (bono) does not relay media. Anyway I still would > see it as beneficial to have a separation of access and core signalling, > especially that in the deployment I am doing, for now, no SBC is planned > (might change due to media flows - if needed to go to core). > The separation is beneficial at least from security perspective. > I will probably work it out with iptables (forcing NAT from public to > local) for now. > > > Piotr Kurpiel > [email protected] > +48602206891 > > On Tue, Apr 7, 2015 at 5:01 PM, Matt Williams < > [email protected]> wrote: > >> Piotr, >> >> It's good to hear from you. >> >> Unfortunately, bono doesn't currently support binding to two different IP >> addresses. >> >> For signaling only, it's probably not too hard to make this work. Bono >> is built from the "sprout" repository ( >> https://github.com/Metaswitch/sprout) and the relevant code is all in >> the stack.cpp module ( >> https://github.com/Metaswitch/sprout/blob/dev/sprout/stack.cpp). The >> fill_transport_details function always gets the local address (by calling >> pj_getaddrinfo on local_host), and we could tweak this to optionally use >> the public address instead. >> >> However, presumably the scenario you're considering here is that the only >> communication between the core and access networks is via the P-CSCF? If >> so, I suspect you'd also need to relay media between the two networks. >> Bono has no support for media at all - adding that would be quite a lot >> more effort. >> >> Is there a scenario in which having separate access and core networks for >> signaling (but not for media) might be useful? Please let me know. >> >> Alternatively, we've tested with Metaswitch's Perimeta P-CSCF/IBCF, which >> includes this function both for signaling and for media. >> >> I hope that helps, and please let me know on the media question. >> >> Thanks, >> >> Matt >> >> -----Original Message----- >> From: [email protected] [mailto: >> [email protected]] On Behalf Of Piotr >> Kurpiel >> Sent: 07 April 2015 11:33 >> To: [email protected] >> Subject: [Clearwater] bono bound to two physical IPs >> >> All, >> >> I am trying to fit the Clearwater manual installation into an existing IP >> design, where access side is vlan-separated from core side. >> >> What I need is to configure bono to bind to two separate IPs (both >> configured and available from OS). >> >> The core IP is private, the access IP is already public (no NAT). >> >> I tried to make use of local_ip (for core) and public_ip (for access) but >> it seems that the public_ip only works on application layer of bono, rather >> than physically bind to that IP. >> >> Is there any trick to do that? >> >> Thanks. >> >> Piotr Kurpiel >> [email protected] >> +48602206891 >> _______________________________________________ >> Clearwater mailing list >> [email protected] >> http://lists.projectclearwater.org/listinfo/clearwater >> > > _______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/listinfo/clearwater
