Hi Chris I installed the VM image in a virtual box in a laptop. This seems to be ok, I can access the site over web interface in my host. I still need to understand how to configure this on the other system but this is a start. Thanks Adrian
On Tue, Mar 29, 2016 at 3:37 PM, Chris Elford (projectclearwater.org) < [email protected]> wrote: > Hi Adrian, > > > > You have the hostname of your AIO node. Have you tried using the web > browser on your laptop to connect to http://<hostname>? For example if > your AIO node has IP address 192.168.0.3, you would type > http://192.168.0.3 into the address bar of your browser? > > > > Ellis normally runs on port 80, not 8080, so that may be the issue. > > > > If that doesn’t work, can I check that I have the right picture of your > setup? I think you have: > > · Project Clearwater AIO node running as a VM on KVM as part of > e.g. an OpenStack deployment. > > · Another VM which you are using to run Linux with the links2 > browser. > > > > Yours, > > > > Chris > > > > *From:* Adrian Schwartz [mailto:[email protected]] > *Sent:* 29 March 2016 12:23 > *To:* Chris Elford (projectclearwater.org) <[email protected]> > *Cc:* [email protected] > *Subject:* Re: [Project Clearwater] newbie all-in-one image hard-start > > > > Hi Chris, > > Thank you for answering. > > I had changed the image from ova to qcow2 by extracting the ova file and > converting the vmdx file by using qemu-img convert. > > I'm not sure that this is related cause I'm able to ping and ssh to the > machine. > > Moreover I installed virtualbox over a laptop and also a installed the > links2 command line web browserand tried to links2 127.0.0.1:8080. > > I don't see anything interesting there, only server status. So I'm not > sure,what does it means when the manual is writing "HTTP to ellis for > subscriber management " > > > > Should I change anything in the configuration as franck said or all the > ip configuration are done automatic after DHCP assign ip address as stated > in the OVF installation guide. > > > > Adrian > > > > > > On Tue, Mar 29, 2016 at 11:51 AM, Chris Elford (projectclearwater.org) < > [email protected]> wrote: > > Hi Adrian, > > > > I may be able to help figure out what is going wrong here. Can you tell me > a little more about how you installed your system, and what kind of > virtualization environment you are running in? You say that you followed > the instructions at > http://clearwater.readthedocs.org/en/stable/All_in_one_OVF_Installation.html, > but these instructions cover install on VMware, not KVM. Did you have to do > anything special to get the OVF to install on KVM? > > > > Yours, > > > > Chris > > > > *From:* Clearwater [mailto:[email protected]] > *On Behalf Of *Adrian Schwartz > *Sent:* 23 March 2016 08:42 > *To:* Franck Malka <[email protected]> > *Cc:* [email protected] > *Subject:* Re: [Project Clearwater] newbie all-in-one image hard-start > > > > I had both > > restart the machine ity didnt helped so manually started ellis and homer > and this didn't helped either. > > attached monit log. > > > > > > The Monit daemon 5.8.1 uptime: 16m > > > > Process 'sprout_process' > > status Running > > monitoring status Monitored > > pid 1646 > > parent pid 1 > > uid 993 > > effective uid 993 > > gid 993 > > uptime 16m > > children 0 > > memory kilobytes 64724 > > memory kilobytes total 64724 > > memory percent 3.1% > > memory percent total 3.1% > > cpu percent 0.5% > > cpu percent total 0.5% > > data collected Wed, 23 Mar 2016 08:37:48 > > > > Program 'sprout_uptime' > > status Waiting > > monitoring status Waiting > > last started Wed, 23 Mar 2016 08:35:26 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:35:26 > > > > Program 'poll_sprout_sip' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:37:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:37:48 > > > > Program 'poll_sprout_http' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:37:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:37:48 > > > > Process 'snmpd_process' > > status Running > > monitoring status Monitored > > pid 1036 > > parent pid 1 > > uid 108 > > effective uid 108 > > gid 114 > > uptime 16m > > children 0 > > memory kilobytes 8080 > > memory kilobytes total 8080 > > memory percent 0.3% > > memory percent total 0.3% > > cpu percent 0.1% > > cpu percent total 0.1% > > data collected Wed, 23 Mar 2016 08:37:48 > > > > Process 'restund_process' > > status Running > > monitoring status Monitored > > pid 1842 > > parent pid 1 > > uid 997 > > effective uid 997 > > gid 997 > > uptime 16m > > children 0 > > memory kilobytes 2452 > > memory kilobytes total 2452 > > memory percent 0.1% > > memory percent total 0.1% > > cpu percent 0.0% > > cpu percent total 0.0% > > data collected Wed, 23 Mar 2016 08:37:48 > > > > Program 'poll_restund' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:37:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:37:48 > > > > Process 'ntp_process' > > status Running > > monitoring status Monitored > > pid 2171 > > parent pid 1 > > uid 106 > > effective uid 106 > > gid 112 > > uptime 16m > > children 0 > > memory kilobytes 4260 > > memory kilobytes total 4260 > > memory percent 0.2% > > memory percent total 0.2% > > cpu percent 0.0% > > cpu percent total 0.0% > > data collected Wed, 23 Mar 2016 08:37:48 > > > > System 'node-cw-aio.example.com' > > status Running > > monitoring status Monitored > > load average [0.19] [0.20] [0.13] > > cpu 13.5%us 2.3%sy 0.1%wa > > memory usage 1234568 kB [60.2%] > > swap usage 0 kB [0.0%] > > data collected Wed, 23 Mar 2016 08:37:48 > > > > Process 'nginx_process' > > status Execution failed > > monitoring status Monitored > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'nginx_uptime' > > status Initializing > > monitoring status Initializing > > data collected Wed, 23 Mar 2016 08:22:27 > > > > Process 'mysql_process' > > status Running > > monitoring status Monitored > > pid 919 > > parent pid 1 > > uid 107 > > effective uid 107 > > gid 113 > > uptime 17m > > children 0 > > memory kilobytes 53484 > > memory kilobytes total 53484 > > memory percent 2.6% > > memory percent total 2.6% > > cpu percent 0.1% > > cpu percent total 0.1% > > unix socket response time 0.000s to /var/run/mysqld/mysqld.sock > [DEFAULT] > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'memcached_process' > > status Running > > monitoring status Monitored > > pid 2380 > > parent pid 1 > > uid 109 > > effective uid 109 > > gid 115 > > uptime 16m > > children 0 > > memory kilobytes 3712 > > memory kilobytes total 3712 > > memory percent 0.1% > > memory percent total 0.1% > > cpu percent 0.0% > > cpu percent total 0.0% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'memcached_uptime' > > status Waiting > > monitoring status Waiting > > last started Wed, 23 Mar 2016 08:36:26 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:36:26 > > > > Program 'poll_memcached' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'homestead_process' > > status Running > > monitoring status Monitored > > pid 2409 > > parent pid 1 > > uid 995 > > effective uid 995 > > gid 995 > > uptime 16m > > children 0 > > memory kilobytes 29512 > > memory kilobytes total 29512 > > memory percent 1.4% > > memory percent total 1.4% > > cpu percent 0.0% > > cpu percent total 0.0% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'homestead_uptime' > > status Waiting > > monitoring status Waiting > > last started Wed, 23 Mar 2016 08:36:26 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:36:26 > > > > Program 'poll_homestead' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'homestead-prov_process' > > status Running > > monitoring status Monitored > > pid 1829 > > parent pid 1 > > uid 0 > > effective uid 0 > > gid 0 > > uptime 17m > > children 0 > > memory kilobytes 36640 > > memory kilobytes total 36640 > > memory percent 1.7% > > memory percent total 1.7% > > cpu percent 0.0% > > cpu percent total 0.0% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'poll_homestead-prov' > > status Status failed > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 1 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'homer_process' > > status Running > > monitoring status Monitored > > pid 8321 > > parent pid 1 > > uid 0 > > effective uid 0 > > gid 0 > > uptime 1m > > children 0 > > memory kilobytes 37328 > > memory kilobytes total 37328 > > memory percent 1.8% > > memory percent total 1.8% > > cpu percent 0.0% > > cpu percent total 0.0% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'poll_homer' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 1 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'ellis_process' > > status Running > > monitoring status Monitored > > pid 8341 > > parent pid 1 > > uid 994 > > effective uid 994 > > gid 994 > > uptime 1m > > children 2 > > memory kilobytes 27888 > > memory kilobytes total 88752 > > memory percent 1.3% > > memory percent total 4.3% > > cpu percent 0.0% > > cpu percent total 0.0% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'poll_ellis' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 1 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'poll_ellis_https' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'clearwater_diags_monitor_process' > > status Running > > monitoring status Monitored > > pid 1010 > > parent pid 1 > > uid 0 > > effective uid 0 > > gid 0 > > uptime 17m > > children 1 > > memory kilobytes 3156 > > memory kilobytes total 3848 > > memory percent 0.1% > > memory percent total 0.1% > > cpu percent 0.1% > > cpu percent total 0.1% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'cassandra_process' > > status Running > > monitoring status Monitored > > pid 1612 > > parent pid 1 > > uid 104 > > effective uid 104 > > gid 111 > > uptime 17m > > children 0 > > memory kilobytes 863304 > > memory kilobytes total 863304 > > memory percent 42.1% > > memory percent total 42.1% > > cpu percent 2.7% > > cpu percent total 2.7% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'cassandra_uptime' > > status Waiting > > monitoring status Waiting > > last started Wed, 23 Mar 2016 08:36:26 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:36:26 > > > > Program 'poll_cassandra' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'chronos_process' > > status Running > > monitoring status Monitored > > pid 1861 > > parent pid 1 > > uid 0 > > effective uid 0 > > gid 0 > > uptime 17m > > children 0 > > memory kilobytes 31884 > > memory kilobytes total 31884 > > memory percent 1.5% > > memory percent total 1.5% > > cpu percent 0.5% > > cpu percent total 0.5% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'chronos_uptime' > > status Waiting > > monitoring status Waiting > > last started Wed, 23 Mar 2016 08:36:26 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:36:26 > > > > Program 'poll_chronos' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'bono_process' > > status Running > > monitoring status Monitored > > pid 1542 > > parent pid 1 > > uid 996 > > effective uid 996 > > gid 996 > > uptime 17m > > children 0 > > memory kilobytes 59824 > > memory kilobytes total 59824 > > memory percent 2.9% > > memory percent total 2.9% > > cpu percent 0.5% > > cpu percent total 0.5% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'poll_bono' > > status Status ok > > monitoring status Monitored > > last started Wed, 23 Mar 2016 08:38:48 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Process 'astaire_process' > > status Running > > monitoring status Monitored > > pid 1529 > > parent pid 1 > > uid 999 > > effective uid 999 > > gid 999 > > uptime 17m > > children 0 > > memory kilobytes 5844 > > memory kilobytes total 5844 > > memory percent 0.2% > > memory percent total 0.2% > > cpu percent 0.1% > > cpu percent total 0.1% > > data collected Wed, 23 Mar 2016 08:38:48 > > > > Program 'astaire_uptime' > > status Waiting > > monitoring status Waiting > > last started Wed, 23 Mar 2016 08:36:26 > > last exit value 0 > > data collected Wed, 23 Mar 2016 08:36:26 > > > > root@cw-aio:/etc/clearwater# > > > > > > On Wed, Mar 23, 2016 at 9:55 AM, Franck Malka <[email protected]> wrote: > > and did you restart the services? > > > > On Wed, Mar 23, 2016, 09:45 Adrian Schwartz <[email protected]> wrote: > > Hi Franck > > If you are refering to the shared_config and local_config > > yes > > I think that it is done automatic, but they reflect the local ip address > that I have > > Adi > > > > On Wed, Mar 23, 2016 at 7:36 AM, Franck Malka <[email protected]> wrote: > > Hi Adi, > > > > did you adjust the configuration file and restarted the services after > your machine got its new ip address? > > > > Franck. > > On Wed, Mar 23, 2016, 05:05 Adrian Schwartz <[email protected]> wrote: > > Hello Everyone > > I downloaded the image file and installed it in my machine (kvm not vmware) > > I don't have DNS on the loacal machine, but the machine is getting ip > address from the DHCP server and is available from each neighboring > computer (they can ping or ssh to it) > > According to what is written here, > http://clearwater.readthedocs.org/en/stable/All_in_one_OVF_Installation.html > > I should be able to http to ellis (I guess by typing ip-address on a > web-browser) > > When I do so I get connection refuse error. > > Moreover when I do wget ip-address:8080 on the clearwater machine I > receive similar error > > When I do wget 127.0.0.1:8080 I recieve a response index file. > > > > Bellow, some error log. > > > > Regards > > Adrian > > > > cat ellis_20160322T190000Z.txt > > 22-03-2016 19:44:15.351 UTC INFO main.py:115: Process 0 starting up > > 22-03-2016 19:44:15.449 UTC WARNING homestead.py:309: Passing SIP password > in the clear over http > > 22-03-2016 19:44:15.473 UTC WARNING iostream.py:507: Connect error on fd > 9: ECONNREFUSED > > 22-03-2016 19:44:15.474 UTC ERROR homestead.py:68: Failed to ping > Homestead at http://192.168.1.19:8889/ping. Have you configured your > HOMESTEAD_URL? > > > > _______________________________________________ > Clearwater mailing list > [email protected] > > http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org > > > > > > >
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
