Hi, Have you had a look at the sprout logs? Could you follow the instructions here: http://clearwater.readthedocs.io/en/latest/Troubleshooting_and_Recovery.html#sprout to turn on debug logging on sprout, and then repro the problem?
You’ll then see a lot more info in /var/log/sprout/sprout_current.txt which should help you figure out what’s going wrong. If not, then send the sprout log file and we can take a look to see what might be happening. Thanks, Seb. From: Clearwater [mailto:[email protected]] On Behalf Of Xiaobai Li Sent: 07 February 2017 04:16 To: [email protected] Subject: [Project Clearwater] manually install clearwater on OpenStack - SIP error 408 Hi guys, I followed the manual installation instructions and successfully installed clearwater on Openstack using 7 vms (1 private DNS zone). I used the SIP client X-lite and successfully registered a user. However, sometimes the X-lite gives me a SIP error 408 and I couldn't make calls between registered users. Here is my settings for the X-lite: General: User ID: 6505550631 Domain: ims.hom password: ******* Display name: ** Authorization name: [email protected]<mailto:[email protected]> Domain Proxy: Send outbound via: proxy: {bono ip address} Topology: sever address: ims.hom Username: [email protected]<mailto:[email protected]> password: ****** Here I also attached the tcpdump between bono and my SIP client when registering a user, after 200 for registration it gives me 408 error for subscribe. Hope anyone can help me to figure out this problem. Thanks a lot! Shirley
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
