Since you’re using a very old release, the documentation for running stress from the release-84 version of the code isn’t on our readthedocs pages. However, you can still find the old instructions in our GitHub repo.
The old instructions for running stress can be found here: https://github.com/Metaswitch/clearwater-readthedocs/blob/release-84/docs/Clearwater_stress_testing.md The old instructions for bulk provisioning subscribers can be found here: https://github.com/Metaswitch/crest/blob/release-84/docs/Bulk-Provisioning%20Numbers.md Using these, you should be able to do option (2). If you want to try option (3), you may be able to use the current instructions for installing the clearwater-sip-stress-coreonly node, and the old instructions for bulk provisioning subscribers (but we’ve never tried running the new stress scripts against such an old deployment). Regards, Seb. From: Clearwater [mailto:[email protected]] On Behalf Of [email protected] Sent: 16 February 2017 01:33 To: [email protected] Subject: Re: [Project Clearwater] Is the clearwater-stress test available for version of repo 84? Hi Seb. Thank for you advice, I would like to try option 2 and 3, May I ask you where to find the older stress scripts? And another problem is the step of bulking provision number of subscribers. http://clearwater.readthedocs.io/en/stable/Clearwater_stress_testing.html?highlight=stress#deploying-a-stress-node I can’t find the “stress_provision.sh” in the homestead node of repo84. Is there any alternative way to do that on repo84? Thank you. From: Clearwater [mailto:[email protected]] On Behalf Of Sebastian Rex Sent: Tuesday, February 14, 2017 8:28 PM To: [email protected]<mailto:[email protected]> Subject: Re: [Project Clearwater] Is the clearwater-stress test available for version of repo 84? Hi, As you’ve seen, there is no clearwater-sip-stress-coreonly package for repo84, but the latest version of the clearwater-sip-stress-coreonly package should work fine against an otherwise repo84 deployment. Therefore, you have a few options: 1. upgrade your deployment to the “stable” release (http://clearwater.readthedocs.io/en/stable/Upgrading_a_Clearwater_deployment.html) 2. use the older stress scripts, by following the instructions to install the clearwater-sip-stress package 3. use the newer scripts, by installing clearwater-sip-stress-coreonly from a later version of the repo. If you opt for (3), then you need to install your stress node manually (following the instructions here: http://clearwater.readthedocs.io/en/stable/Manual_Install.html#configure-the-apt-software-sources) and ensure that you point it at the “stable” repo. Regards, Seb. From: Clearwater [mailto:[email protected]] On Behalf Of [email protected]<mailto:[email protected]> Sent: 14 February 2017 07:56 To: [email protected]<mailto:[email protected]> Subject: [Project Clearwater] Is the clearwater-stress test available for version of repo 84? Dear developers, I would like to do the stress test for my deployment followed by http://clearwater.readthedocs.io/en/stable/Clearwater_stress_testing.html However, my current Clearwater deployment is based on repo84<http://repo.cw-ngv.com/archive/repo84/>, And I found something quite different from the latest instruction on web page of stress test. Is the stress test available for version repo84? Where to find the corresponding stress test instruction for repo84? Or I have to upgrade my Clearwater to the latest version? Thank you very much! -- 本信件可能包含工研院�C密�Y��，非指定之收件者，��勿使用或揭露本信件�热荩��K���N�Т诵偶�。 This email may contain confidential information. Please do not use or disclose it in any way and delete it if you are not the intended recipient. -- 本信件可能包含工研院�C密�Y��，非指定之收件者，��勿使用或揭露本信件�热荩��K���N�Т诵偶�。 This email may contain confidential information. Please do not use or disclose it in any way and delete it if you are not the intended recipient.
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
