Hi Rajesh, Thanks for getting in touch with your question.
In order to see why registrations aren’t working when using Bridged networking it would be helpful to have some more information. Can you try registering a subscriber again, as you do so can you take a packet capture of your AIO node (e.g. using tcpdump) and send me the trace, this will allow me to have a look at what’s happening to the network traffic. After you have done this could you please also send me the current Sprout and Homestead logs (contained in /var/log/), if there are any relevant error messages they should be contained in here. Could you also expand a bit on the IP setup you wish to get to here, am I right in thinking you intend to have one Clearwater AIO working alongside a single TAS server? Thanks, Andrew From: Clearwater [mailto:[email protected]] On Behalf Of rajeshkvs . Sent: Thursday, April 27, 2017 10:56 AM To: [email protected] Subject: [Project Clearwater] using CW-AIO deployment Hi all, I am trying to explore CW-AIO deployment. I did the setup successfully and could make the successful call as well. But i am facing one issue, I am using Oracle Virtual Box to deploy CW-AIO, 1. When VM deployed with Network as "NAT". I could register and make the call between two clients. 2. But when i deploy VM with network as "Bridged". I am not able to register, i am getting 403 Forbidden error. Even in Ellis i could not see the proper dashboard as i view in NAT mode. Looks like we may need to do some additional config to make it work with "Bridged" mode. As i am planning to integrate with another TAS server, i want this setup to work in Bridged so that i can configure SIP trunk to this setup. Kindly help. Regards, Rajesh
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
