Hi Astha, You are welcome for the response. In future could you please reply to the mailing list instead of replying to me directly, that way we might be able to help some people out in the future if they have a similar issue.
If the command cw-upload_shared_config is not working for you I think you must be using an old version of Project Clearwater that was released before we added shortened names for our deployment management scripts. We have updated our documentation now but I believe one of the following commands should work on the older versions: * sudo /usr/share/clearwater/clearwater-config-manager/scripts/upload_shared_config * sudo /usr/bin/cw-upload_shared_config If neither of the following work could you please let me know what version of Project Clearwater you are using by running the command "clearwater-version" Thanks, Andrew From: Astha Sharma [mailto:[email protected]] Sent: Friday, May 12, 2017 9:50 AM To: Andrew Edmonds <[email protected]> Subject: Re: 403 forbidden on registering sip over UDP Hi Andrew, Thanks for quick response. I have followed following steps: In /etc/clearwater/shared_config set or update the fields: a. scscf_uri=sip:scscf.<sprout_hostname>;transport=udp<sip:scscf.%3csprout_hostname%3e;transport=udp> b. disable_tcp_switch=Y In /etc/clearwater/local_config set or update the field on each of your Sprout nodes: a. scscf_node_uri=sip:<local_ip>:5054;transport=udp<sip:%3clocal_ip%3e:5054;transport=udp> and after that as per your suggestion, I tried to run the command "sudo cw-upload_shared_config" But it is failing: [cw-aio]root@cw-aio:/etc/clearwater# cw-upload_shared_config cw-upload_shared_config: command not found Regards, Astha ________________________________ From: Andrew Edmonds <[email protected]<mailto:[email protected]>> Sent: 12 May 2017 13:55:11 To: Astha Sharma Subject: RE: 403 forbidden on registering sip over UDP Hi Astha, Thank you for your question about UDP support. Project Clearwater does support using SIP-over-UDP. For details on how to configure your deployment to use UDP please follow the instructions here<http://clearwater.readthedocs.io/en/stable/Configuring_an_Application_Server.html#sip-over-udp-configuration>. Once you have made these changes run the command "sudo cw-upload_shared_config" and try registering again. Let me know if this resolves your issue. Thanks, Andrew From: Clearwater [mailto:[email protected]] On Behalf Of Astha Sharma Sent: Monday, May 8, 2017 12:32 PM To: [email protected]<mailto:[email protected]> Subject: 403 forbidden on registering sip over UDP Hi, I am facing issue while registering xlite over UDP. I am working over all in one image of clear water ims. All the nodes are running normally. Receiving 403 forbidden from clearwater ims. Please suggest how to make changes for udp in config files in all in one image clearwater ims. Also please find herein pcap files of ims where I am sending register message having udp tramsport and getting 403 forbidden. Regards, Astha "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus." "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
