Hi, I was able to install ellis on the VM. However I see some failures in bootlog. Please let me know if Ellis in up and running.
I see following errors on all 6 VMs which i created for Ellis, Bono, Sprout, Homer, Dime, Vellum. *dnsmasq: failed to create listening socket for port 53: Address already in use * Starting DNS forwarder and DHCP server dnsmasq [fail] * Is it mandatory to have DHCP server up and running if I have all the VMs in same subnet and able to ping each other? ================================================================= * Stopping Read required files in advance [ OK ] * Starting Mount filesystems on boot [ OK ] * Starting Fix-up sensitive /proc filesystem entries [ OK ] * Starting Populate /dev filesystem [ OK ] * Starting Populate and link to /run filesystem [ OK ] * Stopping Fix-up sensitive /proc filesystem entries [ OK ] * Stopping Track if upstart is running in a container [ OK ] * Stopping Populate /dev filesystem [ OK ] * Stopping Populate and link to /run filesystem [ OK ] * Starting Initialize or finalize resolvconf [ OK ] * Starting set console keymap [ OK ] * Starting Signal sysvinit that virtual filesystems are mounted [ OK ] * Starting Signal sysvinit that virtual filesystems are mounted [ OK ] * Starting set sysctls from /etc/sysctl.conf [ OK ] * Starting Bridge udev events into upstart [ OK ] * Stopping set console keymap [ OK ] * Stopping set sysctls from /etc/sysctl.conf [ OK ] * Starting Signal sysvinit that remote filesystems are mounted [ OK ] * Starting device node and kernel event manager [ OK ] * Starting load modules from /etc/modules [ OK ] * Starting cold plug devices [ OK ] * Starting log initial device creation [ OK ] * Stopping load modules from /etc/modules [ OK ] * Starting Uncomplicated firewall [ OK ] * Starting Signal sysvinit that the rootfs is mounted [ OK ] * Starting Clean /tmp directory [ OK ] * Stopping Clean /tmp directory [ OK ] * Starting configure network device security [ OK ] * Starting configure network device security [ OK ] * Starting configure network device security [ OK ] * Starting Signal sysvinit that local filesystems are mounted [ OK ] * Starting configure network device [ OK ] * Stopping Mount filesystems on boot [ OK ] * Starting flush early job output to logs [ OK ] * Stopping flush early job output to logs [ OK ] * Starting Mount network filesystems [ OK ] * Starting SMB/CIFS File Server [ OK ] * Starting Failsafe Boot Delay [ OK ] * Stopping Mount network filesystems [ OK ] * Starting set console font [ OK ] * Stopping set console font [ OK ] * Starting userspace bootsplash [ OK ] * Starting Send an event to indicate plymouth is up [ OK ] * Stopping Send an event to indicate plymouth is up [ OK ] * Starting Bridge file events into upstart [ OK ] * Starting Bridge socket events into upstart [ OK ] * Stopping userspace bootsplash [ OK ] * Starting SMB/CIFS File Server [ OK ] * Starting system logging daemon [ OK ] * Starting D-Bus system message bus [ OK ] * Starting Mount network filesystems [ OK ] * Starting Samba Winbind [ OK ] * Starting configure network device [ OK ] * Stopping Failsafe Boot Delay [ OK ] * Starting SystemD login management service [ OK ] * Stopping cold plug devices [ OK ] * Starting System V initialisation compatibility [ OK ] * Stopping log initial device creation [ OK ] * Starting configure network device security [ OK ] * Starting configure network device [ OK ] * Stopping Mount network filesystems [ OK ] * Starting save udev log and update rules [ OK ] * Stopping save udev log and update rules [ OK ] * Starting configure virtual network devices [ OK ] Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [ OK ] * Starting SMB/CIFS File and Active Directory Server [ OK ] * Stopping System V initialisation compatibility [ OK ] * Starting System V runlevel compatibility [ OK ] * Starting deferred execution scheduler [ OK ] * Starting regular background program processing daemon [ OK ] * Starting ACPI daemon [ OK ] * Starting Monit service manager [ OK ] * Starting save kernel messages [ OK ] * Starting NetBIOS name server [ OK ] * Stopping save kernel messages [ OK ] * Starting automatic crash report generation [ OK ] * Stopping CPU interrupts balancing daemon [ OK ] * Starting OpenSSH server [ OK ] * Starting domain name service... bind9 [ OK ] *dnsmasq: failed to create listening socket for port 53: Address already in use * Starting DNS forwarder and DHCP server dnsmasq [fail] * Starting SMB/CIFS File and Active Directory Server [fail]* * Starting the system activity data collector sadc [ OK ] * Starting the system activity data collector sadc [ OK ] * Starting MySQL Server [ OK ] * Starting NTP server ntpd [ OK ] *dnsmasq: failed to create listening socket for port 53: Address already in use * Restarting DNS forwarder and DHCP server dnsmasq [fail] Error: dial tcp 192.168.56.12:4000 <http://192.168.56.12:4000>: getsockopt: no route to host* Rejoining cluster... Etcd failed to come up - exiting * Restoring resolver state... [ OK ] * Starting Tomcat servlet engine tomcat7 [ OK ] * Stopping System V runlevel compatibility [ OK ] ================================================================= On Wed, May 10, 2017 at 6:16 PM, Hrishikesh Karanjikar <[email protected]> wrote: > Hi, > > I have followed the steps given for Manual installation of Ellis on Ubuntu > 14.04 LTS Server 64 Bit VM. > Following is the installation log, > > ====================================================================== > root@ellis:/home/ellis# apt-get install ellis-node > Reading package lists... Done > Building dependency tree > Reading state information... Done > The following extra packages will be installed: > binutils build-essential clearwater-diags-monitor > clearwater-infrastructure > clearwater-log-cleanup clearwater-monit clearwater-nginx cpp cpp-4.8 > dnsmasq > dnsmasq-base dpkg-dev ellis fakeroot g++ g++-4.8 gcc gcc-4.8 gnutls-bin > inotify-tools libalgorithm-diff-perl libalgorithm-diff-xs-perl > libalgorithm-merge-perl libasan0 libatomic1 libc-dev-bin libc6 libc6-dev > libcloog-isl4 libdbd-mysql-perl libdbi-perl libdpkg-perl libfakeroot > libfile-fcntllock-perl libgcc-4.8-dev libgd3 libgomp1 > libhtml-template-perl > libinotifytools0 libisl10 libitm1 libjbig0 libmnl0 libmpc3 libmpfr4 > libmysqlclient18 libnetfilter-conntrack3 libopts25 libpgm-5.1-0 > libquadmath0 > libsensors4 libstdc++-4.8-dev libterm-readkey-perl libtiff5 libtsan0 > libvpx1 > libxpm4 libxslt1.1 libzmq3 linux-libc-dev make manpages-dev > mysql-client-5.5 > mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 > mysql-server-core-5.5 nginx nginx-common nginx-core ntp > python-chardet-whl > python-colorama python-colorama-whl python-distlib python-distlib-whl > python-html5lib python-html5lib-whl python-pip python-pip-whl > python-requests-whl python-setuptools python-setuptools-whl > python-six-whl > python-urllib3-whl python-virtualenv python-wheel python3-pkg-resources > realpath sysstat > Suggested packages: > binutils-doc clearwater-auto-config clearwater-auto-upgrade exim4 postfix > mail-transport-agent clearwater-snmp-handler-alarm cpp-doc > gcc-4.8-locales > debian-keyring clearwater-logging clearwater-snmpd g++-multilib > g++-4.8-multilib gcc-4.8-doc libstdc++6-4.8-dbg gcc-multilib autoconf > automake1.9 libtool flex bison gdb gcc-doc gcc-4.8-multilib libgcc1-dbg > libgomp1-dbg libitm1-dbg libatomic1-dbg libasan0-dbg libtsan0-dbg > libquadmath0-dbg glibc-doc libclone-perl libmldbm-perl libnet-daemon-perl > libplrpc-perl libsql-statement-perl libgd-tools libipc-sharedcache-perl > lm-sensors libstdc++-4.8-doc make-doc tinyca mailx fcgiwrap nginx-doc > ntp-doc python-genshi python-lxml python3-setuptools isag > Recommended packages: > python-dev-all > The following NEW packages will be installed: > binutils build-essential clearwater-diags-monitor > clearwater-infrastructure > clearwater-log-cleanup clearwater-monit clearwater-nginx cpp cpp-4.8 > dnsmasq > dnsmasq-base dpkg-dev ellis ellis-node fakeroot g++ g++-4.8 gcc gcc-4.8 > gnutls-bin inotify-tools libalgorithm-diff-perl libalgorithm-diff-xs-perl > libalgorithm-merge-perl libasan0 libatomic1 libc-dev-bin libc6-dev > libcloog-isl4 libdbd-mysql-perl libdbi-perl libdpkg-perl libfakeroot > libfile-fcntllock-perl libgcc-4.8-dev libgd3 libgomp1 > libhtml-template-perl > libinotifytools0 libisl10 libitm1 libjbig0 libmnl0 libmpc3 libmpfr4 > libmysqlclient18 libnetfilter-conntrack3 libopts25 libpgm-5.1-0 > libquadmath0 > libsensors4 libstdc++-4.8-dev libterm-readkey-perl libtiff5 libtsan0 > libvpx1 > libxpm4 libxslt1.1 libzmq3 linux-libc-dev make manpages-dev > mysql-client-5.5 > mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 > mysql-server-core-5.5 nginx nginx-common nginx-core ntp > python-chardet-whl > python-colorama python-colorama-whl python-distlib python-distlib-whl > python-html5lib python-html5lib-whl python-pip python-pip-whl > python-requests-whl python-setuptools python-setuptools-whl > python-six-whl > python-urllib3-whl python-virtualenv python-wheel python3-pkg-resources > realpath sysstat > The following packages will be upgraded: > libc6 > 1 upgraded, 91 newly installed, 0 to remove and 145 not upgraded. > Need to get 72.4 MB of archives. > After this operation, 247 MB of additional disk space will be used. > Do you want to continue? [Y/n] y > Get:1 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libc6 > amd64 2.19-0ubuntu6.11 [4,734 kB] > Get:2 http://repo.cw-ngv.com/stable/ binary/ clearwater-infrastructure > 1.0-170504.093807 [384 kB] > Get:3 http://repo.cw-ngv.com/stable/ binary/ clearwater-monit > 5.18-170403.124108 [271 kB] > Get:4 http://repo.cw-ngv.com/stable/ binary/ clearwater-diags-monitor > 1.0-170504.093807 [24.1 kB] > Get:5 http://repo.cw-ngv.com/stable/ binary/ clearwater-log-cleanup > 1.0-170504.093807 [13.2 kB] > Get:6 http://repo.cw-ngv.com/stable/ binary/ clearwater-nginx > 1.0-170405.142510 [20.0 kB] > Get:7 http://repo.cw-ngv.com/stable/ binary/ ellis 1.0-170504.163123 > [11.7 MB] > Get:8 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libasan0 > amd64 4.8.4-2ubuntu1~14.04.3 [63.1 kB] > Get:9 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libatomic1 > amd64 4.8.4-2ubuntu1~14.04.3 [8,636 B] > Get:10 http://us.archive.ubuntu.com/ubuntu/ trusty/main libisl10 amd64 > 0.12.2-1 [419 kB] > Get:11 http://us.archive.ubuntu.com/ubuntu/ trusty/main libcloog-isl4 > amd64 0.18.2-1 [57.5 kB] > Get:12 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libjbig0 > amd64 2.0-2ubuntu4.1 [26.1 kB] > Get:13 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libtiff5 > amd64 4.0.3-7ubuntu0.6 [144 kB] > Get:14 http://us.archive.ubuntu.com/ubuntu/ trusty/main libvpx1 amd64 > 1.3.0-2 [556 kB] > Get:15 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libxpm4 > amd64 1:3.5.10-1ubuntu0.1 [33.2 kB] > Get:16 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libgd3 > amd64 2.1.0-3ubuntu0.6 [122 kB] > Get:17 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libgomp1 > amd64 4.8.4-2ubuntu1~14.04.3 [23.1 kB] > Get:18 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libitm1 > amd64 4.8.4-2ubuntu1~14.04.3 [28.5 kB] > Get:19 http://us.archive.ubuntu.com/ubuntu/ trusty/main libmpfr4 amd64 > 3.1.2-1 [203 kB] > Get:20 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > mysql-common all 5.5.55-0ubuntu0.14.04.1 [13.0 kB] > Get:21 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > libmysqlclient18 amd64 5.5.55-0ubuntu0.14.04.1 [597 kB] > Get:22 http://us.archive.ubuntu.com/ubuntu/ trusty/main libopts25 amd64 > 1:5.18-2ubuntu2 [55.3 kB] > Get:23 http://us.archive.ubuntu.com/ubuntu/ trusty/universe libpgm-5.1-0 > amd64 5.1.118-1~dfsg-0.1ubuntu3 [156 kB] > Get:24 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > libquadmath0 amd64 4.8.4-2ubuntu1~14.04.3 [126 kB] > Get:25 http://us.archive.ubuntu.com/ubuntu/ trusty/main libsensors4 amd64 > 1:3.3.4-2ubuntu1 [27.2 kB] > Get:26 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libtsan0 > amd64 4.8.4-2ubuntu1~14.04.3 [94.9 kB] > Get:27 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > libxslt1.1 amd64 1.1.28-2ubuntu0.1 [145 kB] > Get:28 http://us.archive.ubuntu.com/ubuntu/ trusty/universe libzmq3 amd64 > 4.0.4+dfsg-2 [129 kB] > Get:29 http://us.archive.ubuntu.com/ubuntu/ trusty/main libdbi-perl amd64 > 1.630-1 [879 kB] > Get:30 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > libdbd-mysql-perl amd64 4.025-1ubuntu0.1 [87.6 kB] > Get:31 http://us.archive.ubuntu.com/ubuntu/ trusty/main > libterm-readkey-perl amd64 2.31-1 [27.4 kB] > Get:32 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > mysql-client-core-5.5 amd64 5.5.55-0ubuntu0.14.04.1 [707 kB] > Get:33 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > mysql-client-5.5 amd64 5.5.55-0ubuntu0.14.04.1 [1,586 kB] > Get:34 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > mysql-server-core-5.5 amd64 5.5.55-0ubuntu0.14.04.1 [3,737 kB] > Get:35 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > mysql-server-5.5 amd64 5.5.55-0ubuntu0.14.04.1 [1,996 kB] > Get:36 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main ntp amd64 > 1:4.2.6.p5+dfsg-3ubuntu2.14.04.10 [421 kB] > Get:37 http://repo.cw-ngv.com/stable/ binary/ ellis-node > 1.0-170504.163123 [1,478 B] > Get:38 http://us.archive.ubuntu.com/ubuntu/ trusty/main libmnl0 amd64 > 1.0.3-3ubuntu1 [11.4 kB] > Get:39 http://us.archive.ubuntu.com/ubuntu/ trusty/main libmpc3 amd64 > 1.0.1-1ubuntu1 [38.4 kB] > Get:40 http://us.archive.ubuntu.com/ubuntu/ trusty/main > libnetfilter-conntrack3 amd64 1.0.4-1 [45.9 kB] > Get:41 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main binutils > amd64 2.24-5ubuntu14.2 [2,076 kB] > Get:42 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > libc-dev-bin amd64 2.19-0ubuntu6.11 [69.0 kB] > Get:43 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > linux-libc-dev amd64 3.13.0-117.164 [768 kB] > Get:44 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main libc6-dev > amd64 2.19-0ubuntu6.11 [1,912 kB] > Get:45 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main cpp-4.8 > amd64 4.8.4-2ubuntu1~14.04.3 [4,595 kB] > Get:46 http://us.archive.ubuntu.com/ubuntu/ trusty/main cpp amd64 > 4:4.8.2-1ubuntu6 [27.5 kB] > Get:47 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > libgcc-4.8-dev amd64 4.8.4-2ubuntu1~14.04.3 [1,688 kB] > Get:48 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main gcc-4.8 > amd64 4.8.4-2ubuntu1~14.04.3 [5,047 kB] > Get:49 http://us.archive.ubuntu.com/ubuntu/ trusty/main gcc amd64 > 4:4.8.2-1ubuntu6 [5,098 B] > Get:50 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > libstdc++-4.8-dev amd64 4.8.4-2ubuntu1~14.04.3 [1,053 kB] > Get:51 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main g++-4.8 > amd64 4.8.4-2ubuntu1~14.04.3 [18.1 MB] > Get:52 http://us.archive.ubuntu.com/ubuntu/ trusty/main g++ amd64 > 4:4.8.2-1ubuntu6 [1,490 B] > Get:53 http://us.archive.ubuntu.com/ubuntu/ trusty/main make amd64 > 3.81-8.2ubuntu3 [119 kB] > Get:54 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > libdpkg-perl all 1.17.5ubuntu5.7 [179 kB] > Get:55 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main dpkg-dev > all 1.17.5ubuntu5.7 [726 kB] > Get:56 http://us.archive.ubuntu.com/ubuntu/ trusty/main build-essential > amd64 11.6ubuntu6 [4,838 B] > Get:57 http://us.archive.ubuntu.com/ubuntu/ trusty/universe > libinotifytools0 amd64 3.14-1ubuntu1 [17.0 kB] > Get:58 http://us.archive.ubuntu.com/ubuntu/ trusty/universe inotify-tools > amd64 3.14-1ubuntu1 [22.3 kB] > Get:59 http://us.archive.ubuntu.com/ubuntu/ trusty/main realpath amd64 > 1.19 [14.5 kB] > Get:60 http://us.archive.ubuntu.com/ubuntu/ trusty/main sysstat amd64 > 10.2.0-1 [283 kB] > Get:61 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > dnsmasq-base amd64 2.68-1ubuntu0.1 [257 kB] > Get:62 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > dnsmasq all 2.68-1ubuntu0.1 [14.9 kB] > Get:63 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python-setuptools all 3.3-1ubuntu2 [230 kB] > Get:64 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > gnutls-bin amd64 3.0.11+really2.12.23-12ubuntu2.7 [114 kB] > Get:65 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > nginx-common all 1.4.6-1ubuntu3.7 [19.0 kB] > Get:66 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > nginx-core amd64 1.4.6-1ubuntu3.7 [325 kB] > Get:67 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main nginx all > 1.4.6-1ubuntu3.7 [5,352 B] > Get:68 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > mysql-server all 5.5.55-0ubuntu0.14.04.1 [11.3 kB] > Get:69 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > python-virtualenv all 1.11.4-1ubuntu1 [1,485 kB] > Get:70 http://us.archive.ubuntu.com/ubuntu/ trusty/main libfakeroot amd64 > 1.20-3ubuntu2 [25.4 kB] > Get:71 http://us.archive.ubuntu.com/ubuntu/ trusty/main fakeroot amd64 > 1.20-3ubuntu2 [55.0 kB] > Get:72 http://us.archive.ubuntu.com/ubuntu/ trusty/main > libalgorithm-diff-perl all 1.19.02-3 [50.0 kB] > Get:73 http://us.archive.ubuntu.com/ubuntu/ trusty/main > libalgorithm-diff-xs-perl amd64 0.04-2build4 [12.6 kB] > Get:74 http://us.archive.ubuntu.com/ubuntu/ trusty/main > libalgorithm-merge-perl all 0.08-2 [12.7 kB] > Get:75 http://us.archive.ubuntu.com/ubuntu/ trusty/main > libfile-fcntllock-perl amd64 0.14-2build1 [15.9 kB] > Get:76 http://us.archive.ubuntu.com/ubuntu/ trusty/main > libhtml-template-perl all 2.95-1 [65.5 kB] > Get:77 http://us.archive.ubuntu.com/ubuntu/ trusty/main manpages-dev all > 3.54-1ubuntu1 [1,820 kB] > Get:78 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python3-pkg-resources all 3.3-1ubuntu2 [31.7 kB] > Get:79 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > python-chardet-whl all 2.2.1-2~ubuntu1 [170 kB] > Get:80 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > python-colorama all 0.2.5-0.1ubuntu2 [18.4 kB] > Get:81 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > python-colorama-whl all 0.2.5-0.1ubuntu2 [18.2 kB] > Get:82 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > python-distlib all 0.1.8-1ubuntu1 [113 kB] > Get:83 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > python-distlib-whl all 0.1.8-1ubuntu1 [140 kB] > Get:84 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python-html5lib all 0.999-3~ubuntu1 [83.5 kB] > Get:85 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python-html5lib-whl all 0.999-3~ubuntu1 [109 kB] > Get:86 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python-six-whl all 1.5.2-1ubuntu1 [10.5 kB] > Get:87 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python-urllib3-whl all 1.7.1-1ubuntu4 [64.0 kB] > Get:88 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python-requests-whl all 2.2.1-1ubuntu0.3 [227 kB] > Get:89 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python-setuptools-whl all 3.3-1ubuntu2 [244 kB] > Get:90 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > python-pip-whl all 1.5.4-1ubuntu4 [111 kB] > Get:91 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/universe > python-pip all 1.5.4-1ubuntu4 [97.3 kB] > Get:92 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main > python-wheel all 0.24.0-1~ubuntu1 [44.7 kB] > Fetched 72.4 MB in 13min 10s (91.6 kB/s) > > Extracting templates from packages: 100% > Preconfiguring packages ... > (Reading database ... 62465 files and directories currently installed.) > Preparing to unpack .../libc6_2.19-0ubuntu6.11_amd64.deb ... > Unpacking libc6:amd64 (2.19-0ubuntu6.11) over (2.19-0ubuntu6.9) ... > Setting up libc6:amd64 (2.19-0ubuntu6.11) ... > Processing triggers for libc-bin (2.19-0ubuntu6.9) ... > Selecting previously unselected package libasan0:amd64. > (Reading database ... 62465 files and directories currently installed.) > Preparing to unpack .../libasan0_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking libasan0:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package libatomic1:amd64. > Preparing to unpack .../libatomic1_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking libatomic1:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package libisl10:amd64. > Preparing to unpack .../libisl10_0.12.2-1_amd64.deb ... > Unpacking libisl10:amd64 (0.12.2-1) ... > Selecting previously unselected package libcloog-isl4:amd64. > Preparing to unpack .../libcloog-isl4_0.18.2-1_amd64.deb ... > Unpacking libcloog-isl4:amd64 (0.18.2-1) ... > Selecting previously unselected package libjbig0:amd64. > Preparing to unpack .../libjbig0_2.0-2ubuntu4.1_amd64.deb ... > Unpacking libjbig0:amd64 (2.0-2ubuntu4.1) ... > Selecting previously unselected package libtiff5:amd64. > Preparing to unpack .../libtiff5_4.0.3-7ubuntu0.6_amd64.deb ... > Unpacking libtiff5:amd64 (4.0.3-7ubuntu0.6) ... > Selecting previously unselected package libvpx1:amd64. > Preparing to unpack .../libvpx1_1.3.0-2_amd64.deb ... > Unpacking libvpx1:amd64 (1.3.0-2) ... > Selecting previously unselected package libxpm4:amd64. > Preparing to unpack .../libxpm4_1%3a3.5.10-1ubuntu0.1_amd64.deb ... > Unpacking libxpm4:amd64 (1:3.5.10-1ubuntu0.1) ... > Selecting previously unselected package libgd3:amd64. > Preparing to unpack .../libgd3_2.1.0-3ubuntu0.6_amd64.deb ... > Unpacking libgd3:amd64 (2.1.0-3ubuntu0.6) ... > Selecting previously unselected package libgomp1:amd64. > Preparing to unpack .../libgomp1_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking libgomp1:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package libitm1:amd64. > Preparing to unpack .../libitm1_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking libitm1:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package libmpfr4:amd64. > Preparing to unpack .../libmpfr4_3.1.2-1_amd64.deb ... > Unpacking libmpfr4:amd64 (3.1.2-1) ... > Selecting previously unselected package mysql-common. > Preparing to unpack .../mysql-common_5.5.55-0ubuntu0.14.04.1_all.deb ... > Unpacking mysql-common (5.5.55-0ubuntu0.14.04.1) ... > Selecting previously unselected package libmysqlclient18:amd64. > Preparing to unpack .../libmysqlclient18_5.5.55-0ubuntu0.14.04.1_amd64.deb > ... > Unpacking libmysqlclient18:amd64 (5.5.55-0ubuntu0.14.04.1) ... > Selecting previously unselected package libopts25:amd64. > Preparing to unpack .../libopts25_1%3a5.18-2ubuntu2_amd64.deb ... > Unpacking libopts25:amd64 (1:5.18-2ubuntu2) ... > Selecting previously unselected package libpgm-5.1-0:amd64. > Preparing to unpack .../libpgm-5.1-0_5.1.118-1~dfsg-0.1ubuntu3_amd64.deb > ... > Unpacking libpgm-5.1-0:amd64 (5.1.118-1~dfsg-0.1ubuntu3) ... > Selecting previously unselected package libquadmath0:amd64. > Preparing to unpack .../libquadmath0_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking libquadmath0:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package libsensors4:amd64. > Preparing to unpack .../libsensors4_1%3a3.3.4-2ubuntu1_amd64.deb ... > Unpacking libsensors4:amd64 (1:3.3.4-2ubuntu1) ... > Selecting previously unselected package libtsan0:amd64. > Preparing to unpack .../libtsan0_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking libtsan0:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package libxslt1.1:amd64. > Preparing to unpack .../libxslt1.1_1.1.28-2ubuntu0.1_amd64.deb ... > Unpacking libxslt1.1:amd64 (1.1.28-2ubuntu0.1) ... > Selecting previously unselected package libzmq3:amd64. > Preparing to unpack .../libzmq3_4.0.4+dfsg-2_amd64.deb ... > Unpacking libzmq3:amd64 (4.0.4+dfsg-2) ... > Selecting previously unselected package libdbi-perl. > Preparing to unpack .../libdbi-perl_1.630-1_amd64.deb ... > Unpacking libdbi-perl (1.630-1) ... > Selecting previously unselected package libdbd-mysql-perl. > Preparing to unpack .../libdbd-mysql-perl_4.025-1ubuntu0.1_amd64.deb ... > Unpacking libdbd-mysql-perl (4.025-1ubuntu0.1) ... > Selecting previously unselected package libterm-readkey-perl. > Preparing to unpack .../libterm-readkey-perl_2.31-1_amd64.deb ... > Unpacking libterm-readkey-perl (2.31-1) ... > Selecting previously unselected package mysql-client-core-5.5. > Preparing to unpack > .../mysql-client-core-5.5_5.5.55-0ubuntu0.14.04.1_amd64.deb > ... > Unpacking mysql-client-core-5.5 (5.5.55-0ubuntu0.14.04.1) ... > Selecting previously unselected package mysql-client-5.5. > Preparing to unpack .../mysql-client-5.5_5.5.55-0ubuntu0.14.04.1_amd64.deb > ... > Unpacking mysql-client-5.5 (5.5.55-0ubuntu0.14.04.1) ... > Selecting previously unselected package mysql-server-core-5.5. > Preparing to unpack > .../mysql-server-core-5.5_5.5.55-0ubuntu0.14.04.1_amd64.deb > ... > Unpacking mysql-server-core-5.5 (5.5.55-0ubuntu0.14.04.1) ... > Processing triggers for man-db (2.6.7.1-1ubuntu1) ... > Setting up mysql-common (5.5.55-0ubuntu0.14.04.1) ... > Selecting previously unselected package mysql-server-5.5. > (Reading database ... 62935 files and directories currently installed.) > Preparing to unpack .../mysql-server-5.5_5.5.55-0ubuntu0.14.04.1_amd64.deb > ... > Unpacking mysql-server-5.5 (5.5.55-0ubuntu0.14.04.1) ... > Selecting previously unselected package ntp. > Preparing to unpack .../ntp_1%3a4.2.6.p5+dfsg-3ubuntu2.14.04.10_amd64.deb > ... > Unpacking ntp (1:4.2.6.p5+dfsg-3ubuntu2.14.04.10) ... > Selecting previously unselected package libmnl0:amd64. > Preparing to unpack .../libmnl0_1.0.3-3ubuntu1_amd64.deb ... > Unpacking libmnl0:amd64 (1.0.3-3ubuntu1) ... > Selecting previously unselected package libmpc3:amd64. > Preparing to unpack .../libmpc3_1.0.1-1ubuntu1_amd64.deb ... > Unpacking libmpc3:amd64 (1.0.1-1ubuntu1) ... > Selecting previously unselected package libnetfilter-conntrack3:amd64. > Preparing to unpack .../libnetfilter-conntrack3_1.0.4-1_amd64.deb ... > Unpacking libnetfilter-conntrack3:amd64 (1.0.4-1) ... > Selecting previously unselected package binutils. > Preparing to unpack .../binutils_2.24-5ubuntu14.2_amd64.deb ... > Unpacking binutils (2.24-5ubuntu14.2) ... > Selecting previously unselected package libc-dev-bin. > Preparing to unpack .../libc-dev-bin_2.19-0ubuntu6.11_amd64.deb ... > Unpacking libc-dev-bin (2.19-0ubuntu6.11) ... > Selecting previously unselected package linux-libc-dev:amd64. > Preparing to unpack .../linux-libc-dev_3.13.0-117.164_amd64.deb ... > Unpacking linux-libc-dev:amd64 (3.13.0-117.164) ... > Selecting previously unselected package libc6-dev:amd64. > Preparing to unpack .../libc6-dev_2.19-0ubuntu6.11_amd64.deb ... > Unpacking libc6-dev:amd64 (2.19-0ubuntu6.11) ... > Selecting previously unselected package cpp-4.8. > Preparing to unpack .../cpp-4.8_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking cpp-4.8 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package cpp. > Preparing to unpack .../cpp_4%3a4.8.2-1ubuntu6_amd64.deb ... > Unpacking cpp (4:4.8.2-1ubuntu6) ... > Selecting previously unselected package libgcc-4.8-dev:amd64. > Preparing to unpack .../libgcc-4.8-dev_4.8.4-2ubuntu1~14.04.3_amd64.deb > ... > Unpacking libgcc-4.8-dev:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package gcc-4.8. > Preparing to unpack .../gcc-4.8_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking gcc-4.8 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package gcc. > Preparing to unpack .../gcc_4%3a4.8.2-1ubuntu6_amd64.deb ... > Unpacking gcc (4:4.8.2-1ubuntu6) ... > Selecting previously unselected package libstdc++-4.8-dev:amd64. > Preparing to unpack .../libstdc++-4.8-dev_4.8.4-2ubuntu1~14.04.3_amd64.deb > ... > Unpacking libstdc++-4.8-dev:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package g++-4.8. > Preparing to unpack .../g++-4.8_4.8.4-2ubuntu1~14.04.3_amd64.deb ... > Unpacking g++-4.8 (4.8.4-2ubuntu1~14.04.3) ... > Selecting previously unselected package g++. > Preparing to unpack .../g++_4%3a4.8.2-1ubuntu6_amd64.deb ... > Unpacking g++ (4:4.8.2-1ubuntu6) ... > Selecting previously unselected package make. > Preparing to unpack .../make_3.81-8.2ubuntu3_amd64.deb ... > Unpacking make (3.81-8.2ubuntu3) ... > Selecting previously unselected package libdpkg-perl. > Preparing to unpack .../libdpkg-perl_1.17.5ubuntu5.7_all.deb ... > Unpacking libdpkg-perl (1.17.5ubuntu5.7) ... > Selecting previously unselected package dpkg-dev. > Preparing to unpack .../dpkg-dev_1.17.5ubuntu5.7_all.deb ... > Unpacking dpkg-dev (1.17.5ubuntu5.7) ... > Selecting previously unselected package build-essential. > Preparing to unpack .../build-essential_11.6ubuntu6_amd64.deb ... > Unpacking build-essential (11.6ubuntu6) ... > Selecting previously unselected package libinotifytools0. > Preparing to unpack .../libinotifytools0_3.14-1ubuntu1_amd64.deb ... > Unpacking libinotifytools0 (3.14-1ubuntu1) ... > Selecting previously unselected package inotify-tools. > Preparing to unpack .../inotify-tools_3.14-1ubuntu1_amd64.deb ... > Unpacking inotify-tools (3.14-1ubuntu1) ... > Selecting previously unselected package realpath. > Preparing to unpack .../realpath_1.19_amd64.deb ... > Unpacking realpath (1.19) ... > Selecting previously unselected package sysstat. > Preparing to unpack .../sysstat_10.2.0-1_amd64.deb ... > Unpacking sysstat (10.2.0-1) ... > Selecting previously unselected package dnsmasq-base. > Preparing to unpack .../dnsmasq-base_2.68-1ubuntu0.1_amd64.deb ... > Unpacking dnsmasq-base (2.68-1ubuntu0.1) ... > Selecting previously unselected package dnsmasq. > Preparing to unpack .../dnsmasq_2.68-1ubuntu0.1_all.deb ... > Unpacking dnsmasq (2.68-1ubuntu0.1) ... > Selecting previously unselected package python-setuptools. > Preparing to unpack .../python-setuptools_3.3-1ubuntu2_all.deb ... > Unpacking python-setuptools (3.3-1ubuntu2) ... > Selecting previously unselected package gnutls-bin. > Preparing to unpack .../gnutls-bin_3.0.11+really2.12.23-12ubuntu2.7_amd64.deb > ... > Unpacking gnutls-bin (3.0.11+really2.12.23-12ubuntu2.7) ... > Selecting previously unselected package clearwater-infrastructure. > Preparing to unpack .../clearwater-infrastructure_1.0-170504.093807_amd64.deb > ... > Unpacking clearwater-infrastructure (1.0-170504.093807) ... > Selecting previously unselected package clearwater-monit. > Preparing to unpack .../clearwater-monit_5.18-170403.124108_amd64.deb ... > Unpacking clearwater-monit (5.18-170403.124108) ... > Selecting previously unselected package clearwater-diags-monitor. > Preparing to unpack .../clearwater-diags-monitor_1.0-170504.093807_all.deb > ... > Unpacking clearwater-diags-monitor (1.0-170504.093807) ... > Selecting previously unselected package clearwater-log-cleanup. > Preparing to unpack .../clearwater-log-cleanup_1.0-170504.093807_all.deb > ... > Unpacking clearwater-log-cleanup (1.0-170504.093807) ... > Selecting previously unselected package nginx-common. > Preparing to unpack .../nginx-common_1.4.6-1ubuntu3.7_all.deb ... > Unpacking nginx-common (1.4.6-1ubuntu3.7) ... > Selecting previously unselected package nginx-core. > Preparing to unpack .../nginx-core_1.4.6-1ubuntu3.7_amd64.deb ... > Unpacking nginx-core (1.4.6-1ubuntu3.7) ... > Selecting previously unselected package nginx. > Preparing to unpack .../nginx_1.4.6-1ubuntu3.7_all.deb ... > Unpacking nginx (1.4.6-1ubuntu3.7) ... > Selecting previously unselected package clearwater-nginx. > Preparing to unpack .../clearwater-nginx_1.0-170405.142510_all.deb ... > Unpacking clearwater-nginx (1.0-170405.142510) ... > Selecting previously unselected package mysql-server. > Preparing to unpack .../mysql-server_5.5.55-0ubuntu0.14.04.1_all.deb ... > Unpacking mysql-server (5.5.55-0ubuntu0.14.04.1) ... > Selecting previously unselected package python-virtualenv. > Preparing to unpack .../python-virtualenv_1.11.4-1ubuntu1_all.deb ... > Unpacking python-virtualenv (1.11.4-1ubuntu1) ... > Selecting previously unselected package ellis. > Preparing to unpack .../ellis_1.0-170504.163123_amd64.deb ... > Unpacking ellis (1.0-170504.163123) ... > Selecting previously unselected package ellis-node. > Preparing to unpack .../ellis-node_1.0-170504.163123_amd64.deb ... > Unpacking ellis-node (1.0-170504.163123) ... > Selecting previously unselected package libfakeroot:amd64. > Preparing to unpack .../libfakeroot_1.20-3ubuntu2_amd64.deb ... > Unpacking libfakeroot:amd64 (1.20-3ubuntu2) ... > Selecting previously unselected package fakeroot. > Preparing to unpack .../fakeroot_1.20-3ubuntu2_amd64.deb ... > Unpacking fakeroot (1.20-3ubuntu2) ... > Selecting previously unselected package libalgorithm-diff-perl. > Preparing to unpack .../libalgorithm-diff-perl_1.19.02-3_all.deb ... > Unpacking libalgorithm-diff-perl (1.19.02-3) ... > Selecting previously unselected package libalgorithm-diff-xs-perl. > Preparing to unpack .../libalgorithm-diff-xs-perl_0.04-2build4_amd64.deb > ... > Unpacking libalgorithm-diff-xs-perl (0.04-2build4) ... > Selecting previously unselected package libalgorithm-merge-perl. > Preparing to unpack .../libalgorithm-merge-perl_0.08-2_all.deb ... > Unpacking libalgorithm-merge-perl (0.08-2) ... > Selecting previously unselected package libfile-fcntllock-perl. > Preparing to unpack .../libfile-fcntllock-perl_0.14-2build1_amd64.deb ... > Unpacking libfile-fcntllock-perl (0.14-2build1) ... > Selecting previously unselected package libhtml-template-perl. > Preparing to unpack .../libhtml-template-perl_2.95-1_all.deb ... > Unpacking libhtml-template-perl (2.95-1) ... > Selecting previously unselected package manpages-dev. > Preparing to unpack .../manpages-dev_3.54-1ubuntu1_all.deb ... > Unpacking manpages-dev (3.54-1ubuntu1) ... > Selecting previously unselected package python3-pkg-resources. > Preparing to unpack .../python3-pkg-resources_3.3-1ubuntu2_all.deb ... > Unpacking python3-pkg-resources (3.3-1ubuntu2) ... > Selecting previously unselected package python-chardet-whl. > Preparing to unpack .../python-chardet-whl_2.2.1-2~ubuntu1_all.deb ... > Unpacking python-chardet-whl (2.2.1-2~ubuntu1) ... > Selecting previously unselected package python-colorama. > Preparing to unpack .../python-colorama_0.2.5-0.1ubuntu2_all.deb ... > Unpacking python-colorama (0.2.5-0.1ubuntu2) ... > Selecting previously unselected package python-colorama-whl. > Preparing to unpack .../python-colorama-whl_0.2.5-0.1ubuntu2_all.deb ... > Unpacking python-colorama-whl (0.2.5-0.1ubuntu2) ... > Selecting previously unselected package python-distlib. > Preparing to unpack .../python-distlib_0.1.8-1ubuntu1_all.deb ... > Unpacking python-distlib (0.1.8-1ubuntu1) ... > Selecting previously unselected package python-distlib-whl. > Preparing to unpack .../python-distlib-whl_0.1.8-1ubuntu1_all.deb ... > Unpacking python-distlib-whl (0.1.8-1ubuntu1) ... > Selecting previously unselected package python-html5lib. > Preparing to unpack .../python-html5lib_0.999-3~ubuntu1_all.deb ... > Unpacking python-html5lib (0.999-3~ubuntu1) ... > Selecting previously unselected package python-html5lib-whl. > Preparing to unpack .../python-html5lib-whl_0.999-3~ubuntu1_all.deb ... > Unpacking python-html5lib-whl (0.999-3~ubuntu1) ... > Selecting previously unselected package python-six-whl. > Preparing to unpack .../python-six-whl_1.5.2-1ubuntu1_all.deb ... > Unpacking python-six-whl (1.5.2-1ubuntu1) ... > Selecting previously unselected package python-urllib3-whl. > Preparing to unpack .../python-urllib3-whl_1.7.1-1ubuntu4_all.deb ... > Unpacking python-urllib3-whl (1.7.1-1ubuntu4) ... > Selecting previously unselected package python-requests-whl. > Preparing to unpack .../python-requests-whl_2.2.1-1ubuntu0.3_all.deb ... > Unpacking python-requests-whl (2.2.1-1ubuntu0.3) ... > Selecting previously unselected package python-setuptools-whl. > Preparing to unpack .../python-setuptools-whl_3.3-1ubuntu2_all.deb ... > Unpacking python-setuptools-whl (3.3-1ubuntu2) ... > Selecting previously unselected package python-pip-whl. > Preparing to unpack .../python-pip-whl_1.5.4-1ubuntu4_all.deb ... > Unpacking python-pip-whl (1.5.4-1ubuntu4) ... > Selecting previously unselected package python-pip. > Preparing to unpack .../python-pip_1.5.4-1ubuntu4_all.deb ... > Unpacking python-pip (1.5.4-1ubuntu4) ... > Selecting previously unselected package python-wheel. > Preparing to unpack .../python-wheel_0.24.0-1~ubuntu1_all.deb ... > Unpacking python-wheel (0.24.0-1~ubuntu1) ... > Processing triggers for ureadahead (0.100.0-16) ... > ureadahead will be reprofiled on next reboot > Processing triggers for man-db (2.6.7.1-1ubuntu1) ... > Processing triggers for ufw (0.34~rc-0ubuntu2) ... > Setting up libasan0:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Setting up libatomic1:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Setting up libisl10:amd64 (0.12.2-1) ... > Setting up libcloog-isl4:amd64 (0.18.2-1) ... > Setting up libjbig0:amd64 (2.0-2ubuntu4.1) ... > Setting up libtiff5:amd64 (4.0.3-7ubuntu0.6) ... > Setting up libvpx1:amd64 (1.3.0-2) ... > Setting up libxpm4:amd64 (1:3.5.10-1ubuntu0.1) ... > Setting up libgd3:amd64 (2.1.0-3ubuntu0.6) ... > Setting up libgomp1:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Setting up libitm1:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Setting up libmpfr4:amd64 (3.1.2-1) ... > Setting up libmysqlclient18:amd64 (5.5.55-0ubuntu0.14.04.1) ... > Setting up libopts25:amd64 (1:5.18-2ubuntu2) ... > Setting up libpgm-5.1-0:amd64 (5.1.118-1~dfsg-0.1ubuntu3) ... > Setting up libquadmath0:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Setting up libsensors4:amd64 (1:3.3.4-2ubuntu1) ... > Setting up libtsan0:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Setting up libxslt1.1:amd64 (1.1.28-2ubuntu0.1) ... > Setting up libzmq3:amd64 (4.0.4+dfsg-2) ... > Setting up libdbi-perl (1.630-1) ... > Setting up libdbd-mysql-perl (4.025-1ubuntu0.1) ... > Setting up libterm-readkey-perl (2.31-1) ... > Setting up mysql-client-core-5.5 (5.5.55-0ubuntu0.14.04.1) ... > Setting up mysql-client-5.5 (5.5.55-0ubuntu0.14.04.1) ... > Setting up mysql-server-core-5.5 (5.5.55-0ubuntu0.14.04.1) ... > Setting up mysql-server-5.5 (5.5.55-0ubuntu0.14.04.1) ... > 170510 17:29:41 [Warning] Using unique option prefix key_buffer instead of > key_buffer_size is deprecated and will be removed in a future release. > Please use the full name instead. > 170510 17:29:41 [Note] Ignoring --secure-file-priv value as server is > running with --bootstrap. > 170510 17:29:41 [Note] /usr/sbin/mysqld (mysqld 5.5.55-0ubuntu0.14.04.1) > starting as process 8879 ... > mysql start/running, process 9011 > Setting up ntp (1:4.2.6.p5+dfsg-3ubuntu2.14.04.10) ... > * Starting NTP server ntpd > > > [ OK ] > Setting up libmnl0:amd64 (1.0.3-3ubuntu1) ... > Setting up libmpc3:amd64 (1.0.1-1ubuntu1) ... > Setting up libnetfilter-conntrack3:amd64 (1.0.4-1) ... > Setting up binutils (2.24-5ubuntu14.2) ... > Setting up libc-dev-bin (2.19-0ubuntu6.11) ... > Setting up linux-libc-dev:amd64 (3.13.0-117.164) ... > Setting up libc6-dev:amd64 (2.19-0ubuntu6.11) ... > Setting up cpp-4.8 (4.8.4-2ubuntu1~14.04.3) ... > Setting up cpp (4:4.8.2-1ubuntu6) ... > Setting up libgcc-4.8-dev:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Setting up gcc-4.8 (4.8.4-2ubuntu1~14.04.3) ... > Setting up gcc (4:4.8.2-1ubuntu6) ... > Setting up libstdc++-4.8-dev:amd64 (4.8.4-2ubuntu1~14.04.3) ... > Setting up g++-4.8 (4.8.4-2ubuntu1~14.04.3) ... > Setting up g++ (4:4.8.2-1ubuntu6) ... > update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in > auto mode > Setting up make (3.81-8.2ubuntu3) ... > Setting up libdpkg-perl (1.17.5ubuntu5.7) ... > Setting up dpkg-dev (1.17.5ubuntu5.7) ... > Setting up build-essential (11.6ubuntu6) ... > Setting up libinotifytools0 (3.14-1ubuntu1) ... > Setting up inotify-tools (3.14-1ubuntu1) ... > Setting up realpath (1.19) ... > Setting up sysstat (10.2.0-1) ... > > Creating config file /etc/default/sysstat with new version > update-alternatives: using /usr/bin/sar.sysstat to provide /usr/bin/sar > (sar) in auto mode > Setting up dnsmasq-base (2.68-1ubuntu0.1) ... > Setting up dnsmasq (2.68-1ubuntu0.1) ... > * Starting DNS forwarder and DHCP server dnsmasq > > > [ OK ] > Setting up python-setuptools (3.3-1ubuntu2) ... > Setting up gnutls-bin (3.0.11+really2.12.23-12ubuntu2.7) ... > Setting up nginx-common (1.4.6-1ubuntu3.7) ... > Setting up python-virtualenv (1.11.4-1ubuntu1) ... > Setting up libfakeroot:amd64 (1.20-3ubuntu2) ... > Setting up fakeroot (1.20-3ubuntu2) ... > update-alternatives: using /usr/bin/fakeroot-sysv to provide > /usr/bin/fakeroot (fakeroot) in auto mode > Setting up libalgorithm-diff-perl (1.19.02-3) ... > Setting up libalgorithm-diff-xs-perl (0.04-2build4) ... > Setting up libalgorithm-merge-perl (0.08-2) ... > Setting up libfile-fcntllock-perl (0.14-2build1) ... > Setting up libhtml-template-perl (2.95-1) ... > Setting up manpages-dev (3.54-1ubuntu1) ... > Setting up python3-pkg-resources (3.3-1ubuntu2) ... > Setting up python-chardet-whl (2.2.1-2~ubuntu1) ... > Setting up python-colorama (0.2.5-0.1ubuntu2) ... > Setting up python-colorama-whl (0.2.5-0.1ubuntu2) ... > Setting up python-distlib (0.1.8-1ubuntu1) ... > Setting up python-distlib-whl (0.1.8-1ubuntu1) ... > Setting up python-html5lib (0.999-3~ubuntu1) ... > Setting up python-html5lib-whl (0.999-3~ubuntu1) ... > Setting up python-six-whl (1.5.2-1ubuntu1) ... > Setting up python-urllib3-whl (1.7.1-1ubuntu4) ... > Setting up python-requests-whl (2.2.1-1ubuntu0.3) ... > Setting up python-setuptools-whl (3.3-1ubuntu2) ... > Setting up python-pip-whl (1.5.4-1ubuntu4) ... > Setting up python-pip (1.5.4-1ubuntu4) ... > Setting up python-wheel (0.24.0-1~ubuntu1) ... > Processing triggers for ureadahead (0.100.0-16) ... > Setting up mysql-server (5.5.55-0ubuntu0.14.04.1) ... > Setting up clearwater-infrastructure (1.0-170504.093807) ... > Processing pyzmq-16.0.2-py2.7-linux-x86_64.egg > Copying pyzmq-16.0.2-py2.7-linux-x86_64.egg to > /usr/local/lib/python2.7/dist-packages > Adding pyzmq 16.0.2 to easy-install.pth file > > Installed /usr/local/lib/python2.7/dist-packages/pyzmq-16.0.2-py2.7- > linux-x86_64.egg > Processing dependencies for pyzmq==16.0.2 > Finished processing dependencies for pyzmq==16.0.2 > * Restarting DNS forwarder and DHCP server dnsmasq > > > [ OK ] > Processing triggers for ureadahead (0.100.0-16) ... > Setting up clearwater-log-cleanup (1.0-170504.093807) ... > Setting up clearwater-monit (5.18-170403.124108) ... > clearwater-monit start/running, process 9740 > Processing triggers for ureadahead (0.100.0-16) ... > Setting up clearwater-diags-monitor (1.0-170504.093807) ... > Processing triggers for ufw (0.34~rc-0ubuntu2) ... > Setting up nginx-core (1.4.6-1ubuntu3.7) ... > Setting up nginx (1.4.6-1ubuntu3.7) ... > Setting up clearwater-nginx (1.0-170405.142510) ... > Testing nginx configuration... > nginx: the configuration file /etc/nginx/nginx.conf syntax is ok > nginx: configuration file /etc/nginx/nginx.conf test is successful > Site ping has been enabled. Run /etc/init.d/nginx reload to apply the > changes. > Generating a 2048 bit RSA private key > ............................................................ > ............................................................ > ...................................................+++ > ...........+++ > writing new private key to 'nginx.key' > ----- > Signature ok > subject=/C=UK/ST=Unknown state/L=Unknown locality/O=Unknown > organization/OU=Unknown organizational unit/CN=unknown.example/ > emailAddress=Unknown > Getting Private key > Adding 'diversion of /etc/nginx/nginx.conf to > /etc/nginx/nginx.conf.clearwater-orig > by clearwater-nginx' > Setting up ellis (1.0-170504.163123) ... > usermod: user ellis is currently used by process 1222 > > > > *dpkg: error processing package ellis (--configure): subprocess installed > post-installation script returned error exit status 8E: Sub-process > /usr/bin/dpkg returned an error code (1)* > > root@ellis:/home/ellis# cat /etc/clearwater/local_config > local_ip=10.48.6.179 > public_ip=10.48.6.179 > public_hostname=ellis > etcd_cluster="10.48.6.179" > > ====================================================================== > > Can you tell me what is wrong? Can I ignore this error? > > Thanks > Hrishikesh >
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
