Hi Eric, Thank you for your question.
Since we have updated our node types the bulk-provisioning commands<https://github.com/Metaswitch/crest/blob/dev/docs/Bulk-Provisioning%20Numbers.md> should be run on the vellum nodes. Can you check that you get a successful output when you run the stress_provision.sh script. You should also have your deployment configured to use homestead-prov. This will mean that subscriber details are looked up in the Cassandra database (which is where the stress_provision.sh provisions subscribers to) rather than an external HSS. To verify this can you check your /etc/clearwater/shared_config file contains the following config options: # HSS configuration hss_hostname=0.0.0.0 hss_port=3868 There doesn’t appear to be any errors in the Bono log you have sent me. If you try the above and still get failures could you please send me the most recent /var/log/sprout/sprout_XX log from the Sprout node? Thanks, Andrew From: Clearwater [mailto:[email protected]] On Behalf Of ??? Sent: Monday, June 12, 2017 5:55 AM To: [email protected] Subject: [Project Clearwater] Sipp stress test problem - 400 Bad Request Hi, I had installed new version of clearwater. When I finished Sipp intallation, I start stress test in Clearwater. When I user boghe or zoiper, the clearwater system can process registration and call setup, it running normaly. I had checked my clearwater all process is status ok or running, but stress test is error. The all error message which stress node got is 400 Bad Request. The message is like as following : 2017-06-11 21:37:18:327 1497242238.327900: Aborting call on unexpected message for Call-Id '[email protected]<mailto:[email protected]>': while expecting '200' (index 5), received 'SIP/2.0 400 Bad Request I'm sure is not the stress node error, because I use it to test the old version of clearwater, which is not include vellum and dime nodes, and it works. Until recently, I had installed new version of clearwater, and creat new accounts following other use https://github.com/Metaswitch/crest/blob/dev/docs/Bulk-Provisioning%20Numbers.md steps, as I was did, the stress node always recieve 400 bad reqeust. These is bono log : 12-06-2017 04:35:25.531 UTC Status load_monitor.cpp:260: Maximum incoming request rate/second unchanged - only handled 20 requests in last 202058ms, minimum threshold for a change is 60461.304688 12-06-2017 04:35:26.309 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 12-06-2017 04:35:41.314 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 12-06-2017 04:35:53.098 UTC Status alarm.cpp:244: Reraising all alarms with a known state 12-06-2017 04:35:53.099 UTC Status alarm.cpp:37: sprout issued 1005.1 alarm 12-06-2017 04:35:53.099 UTC Status alarm.cpp:37: sprout issued 1012.3 alarm 12-06-2017 04:35:56.329 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 12-06-2017 04:36:11.345 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 12-06-2017 04:36:15.186 UTC Status sip_connection_pool.cpp:422: Recycle TCP connection slot 23 12-06-2017 04:36:20.187 UTC Status sip_connection_pool.cpp:422: Recycle TCP connection slot 41 12-06-2017 04:36:23.099 UTC Status alarm.cpp:244: Reraising all alarms with a known state 12-06-2017 04:36:23.099 UTC Status alarm.cpp:37: sprout issued 1005.1 alarm 12-06-2017 04:36:23.099 UTC Status alarm.cpp:37: sprout issued 1012.3 alarm 12-06-2017 04:36:26.360 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 12-06-2017 04:36:34.189 UTC Status sip_connection_pool.cpp:422: Recycle TCP connection slot 28 12-06-2017 04:36:41.363 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 12-06-2017 04:36:53.099 UTC Status alarm.cpp:244: Reraising all alarms with a known state 12-06-2017 04:36:53.099 UTC Status alarm.cpp:37: sprout issued 1005.1 alarm 12-06-2017 04:36:53.099 UTC Status alarm.cpp:37: sprout issued 1012.3 alarm 12-06-2017 04:36:56.376 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 12-06-2017 04:37:08.195 UTC Status sip_connection_pool.cpp:422: Recycle TCP connection slot 42 12-06-2017 04:37:11.376 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 12-06-2017 04:37:14.483 UTC Status load_monitor.cpp:260: Maximum incoming request rate/second unchanged - only handled 20 requests in last 108948ms, minimum threshold for a change is 32600.236328 12-06-2017 04:37:16.535 UTC Status load_monitor.cpp:260: Maximum incoming request rate/second unchanged - only handled 195 requests in last 2052ms, minimum threshold for a change is 614.014832 12-06-2017 04:37:23.099 UTC Status alarm.cpp:244: Reraising all alarms with a known state 12-06-2017 04:37:23.099 UTC Status alarm.cpp:37: sprout issued 1005.1 alarm 12-06-2017 04:37:23.099 UTC Status alarm.cpp:37: sprout issued 1012.3 alarm 12-06-2017 04:37:23.197 UTC Status sip_connection_pool.cpp:422: Recycle TCP connection slot 4 12-06-2017 04:37:26.382 UTC Warning (Net-SNMP): Warning: Failed to connect to the agentx master agent ([NIL]): 2-06-2017 04:37:26.671 UTC Status load_monitor.cpp:260: Maximum incoming request rate/second unchanged - only handled 197 requests in last 10135ms, minimum threshold for a change is 3032.670410 Futherly, I use sipp to test new version clearwater that is work. But recently I install new clearwater system, its not working anymore. How to solve the problem, Any help is appreciated. Grades, Eric
_______________________________________________ Clearwater mailing list [email protected] http://lists.projectclearwater.org/mailman/listinfo/clearwater_lists.projectclearwater.org
