David Whitney wrote:
> Hi,
>
> I'm operating on an i686 machine and I cannot get the 'busybox' binary
> and the links to it (such as ls, cat, chown, etc) installed in the
> proper destination directory.
>
> I am following this guide:
> http://cross-lfs.org/view/clfs-embedded/x86/final-system/busybox.html
> <http://cross-lfs.org/view/clfs-embedded/x86/final-system/busybox.html>
>
> I am running this command to perform the install:
>
> make ARCH=i386 CROSS_COMPILE="${CLFS_TARGET}-" CFLAGS="${BUILD}"
> PREFIX="${CLFS}" install
>
With the later versions of Busybox (>1.2.2) PREFIX= has been
replaced with CONFIG_PREFIX=
> From executing the following statement, 'echo ${CLFS_TARGET} ${CLFS}
> ${BUILD}', the output is:
> i686-pc-linux-uclibc /home/clfsEMB -m32
>
> This is the output generated when "installing" busybox (of course
> shortened for brevity):
> ./_install/bin/addgroup -> busybox
> ./_install/bin/adduser -> busybox
> ./_install/bin/ash -> busybox
> ./_install/bin/bbconfig -> busybox
> .
> .
> .
> ./_install/linuxrc -> bin/busybox
> ./_install/sbin/adjtimex -> ../bin/busybox
> ./_install/sbin/arp -> ../bin/busybox
> ./_install/sbin/fdisk -> ../bin/busybox
> .
> .
> .
> ./_install/usr/sbin/readprofile -> ../../bin/busybox
> ./_install/usr/sbin/setlogcons -> ../../bin/busybox
> ./_install/usr/sbin/telnetd -> ../../bin/busybox
> ./_install/usr/sbin/udhcpd -> ../../bin/busybox
>
>
> In the source directory for busybox-1.4.1 I have an ELF 32-bit
> executable called 'busybox'. Within '_install/bin' I have another copy
> of the 'busybox' executable and a boat-load of links to it (for
> addgroup, adduser, ash, etc).
>
> After I did the 'install' above, I expected to find the 'busybox'
> executable and the links to it within the ${CLFS}/bin directory;
> however I had no such joy.
>
> When I ran the following command, 'find ${CLFS} -name busybox', this was
> the output:
>
> /home/clfsEMB/sources/busybox-1.4.1/busybox
> /home/clfsEMB/sources/busybox-1.4.1/include/config/busybox
> /home/clfsEMB/sources/busybox-1.4.1/_install/bin/busybox
>
> Is there an additional step missing in the instruction guide? I've
> repeated the existing instructions, the first time applying all busybox
> patches I found on the web, the second time without ( i.e. only applying
> the patch provided by CLFS).
>
> Dave Whitney
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Clfs-support mailing list
> [email protected]
> http://lists.cross-lfs.org/cgi-bin/mailman/listinfo/clfs-support
_______________________________________________
Clfs-support mailing list
[email protected]
http://lists.cross-lfs.org/cgi-bin/mailman/listinfo/clfs-support
