---------- Forwarded Message ---------- Subject: Re: [Clfs-support] bin86 install and chroot(ABLE) test: x86_64 build Date: Friday 18 January 2008 From: b-vol <[EMAIL PROTECTED]> To: CLFS Support <clfs-support@lists.cross-lfs.org>
On Thursday 17 January 2008 06:27:41 pm Ken Moffat wrote: > On Thu, Jan 17, 2008 at 05:07:08PM +0000, b-vol wrote: > > Greetings > > > > > > ########### 7.12. Bin86-0.16.17 > > > > its a good idea to put the following two lines in any update of the book > > otherwise lilo will not install: > > > > cd /cross-tools/bin > > ln -s /cross-tools/bin/x86_64-unknown-linux-gnu-as86 > > /cross-tools/bin/as86 ln -s > > /cross-tools/bin/x86_64-unknown-linux-gnu-ld86 /cross-tools/bin/ld86 > > If I can quote from your posting yesterday: > |############7.13. Lilo-22.8 install > | > |AS86 version 0.16.10 or later is required > |as86 is not present > | > |LD86 version 0.16.10 or later is required > |ld86 is not present > | > |BCC version 0.16.10 or later is recommended > |bcc is not present > |You will not be able to make floppy2, diag2.img, or lilo.com > |make: *** [test.img] Error 1 > | > |######### > > You made me start to question whether this version of the book had > become broken, so I looked at the patch for lilo, and it hardcodes > the prefix as x86_64-unknown-linux-gnu which matches the value shown > in section 5.4. > > If I try to build lilo on he ppc I'm currently using, > unsurprisingly it fails to boot, but my messages are a little > different from yours: > [EMAIL PROTECTED] ~/lilo-22.8 $make lilo.static > ./checkit > GCC version 2.91 or later is required > gcc version 4.2.2 > OKAY > > AS86 version 0.16.10 or later is required > x86_64-unknown-linux-gnu-as86 is not present > > LD86 version 0.16.10 or later is required > x86_64-unknown-linux-gnu-ld86 is not present > > BCC version 0.16.10 or later is recommended > bcc is not present > You will not be able to make floppy2, diag2.img, or lilo.com > make: *** [test.img] Error 1 > > So it's clear that you didn't apply the patch. root:/home/clfs# cd '/mnt/clfs/cross-tools/bin' root:/mnt/clfs/cross-tools/bin# root:/mnt/clfs/cross-tools/bin# root:/mnt/clfs/cross-tools/bin# rm as86 rm: remove symbolic link `as86'? yes root:/mnt/clfs/cross-tools/bin# root:/mnt/clfs/cross-tools/bin# rm ld86 rm: remove symbolic link `ld86'? yes root:/mnt/clfs/cross-tools/bin# root:/mnt/clfs/cross-tools/bin# root:/mnt/clfs/cross-tools/bin# cd '/mnt/clfs/sources-clfsX64Jn08' root:/mnt/clfs/sources-clfsX64Jn08# tar xzvf lilo-22.8.src.tar.gz lilo-22.8/README lilo-22.8/README.bitmaps lilo-22.8/README.common.problems lilo-22.8/README.disk lilo-22.8/README.nokeyboard lilo-22.8/README.pseudo lilo-22.8/README.raid1 lilo-22.8/README.volumeID lilo-22.8/INCOMPAT lilo-22.8/CHANGES lilo-22.8/COPYING lilo-22.8/COPYRIGHT lilo-22.8/QuickInst lilo-22.8/lilo.lsm lilo-22.8/checkit lilo-22.8/Makefile lilo-22.8/bdata.h lilo-22.8/bitmap.h lilo-22.8/boot.h lilo-22.8/bsect.h lilo-22.8/cfg.h lilo-22.8/common.h lilo-22.8/config.h lilo-22.8/device.h lilo-22.8/edit.h lilo-22.8/geometry.h lilo-22.8/identify.h lilo-22.8/lilo.h lilo-22.8/loader.h lilo-22.8/map.h lilo-22.8/md-int.h lilo-22.8/partition.h lilo-22.8/probe.h lilo-22.8/raid.h lilo-22.8/shs2.h lilo-22.8/temp.h lilo-22.8/version.h lilo-22.8/vesainfo.h lilo-22.8/activate.c lilo-22.8/boot.c lilo-22.8/bsect.c lilo-22.8/cfg.c lilo-22.8/common.c lilo-22.8/device.c lilo-22.8/edit.c lilo-22.8/geometry.c lilo-22.8/identify.c lilo-22.8/lilo.c lilo-22.8/map.c lilo-22.8/partition.c lilo-22.8/probe.c lilo-22.8/raid.c lilo-22.8/shs2.c lilo-22.8/temp.c lilo-22.8/biosdata.S lilo-22.8/bitmap.S lilo-22.8/bootsect.S lilo-22.8/chain.S lilo-22.8/crt.S lilo-22.8/disk.S lilo-22.8/display4.S lilo-22.8/dparam.S lilo-22.8/dump.S lilo-22.8/first.S lilo-22.8/graph.S lilo-22.8/mapper.S lilo-22.8/mbr.S lilo-22.8/menu.S lilo-22.8/pseudo.S lilo-22.8/read.S lilo-22.8/second.S lilo-22.8/shs3.S lilo-22.8/strlen.S lilo-22.8/volume.S lilo-22.8/mkbdist lilo-22.8/mksdist lilo-22.8/mkrescue lilo-22.8/keytab-lilo.pl lilo-22.8/sample/ins64a.bmp lilo-22.8/sample/ins64a.dat lilo-22.8/sample/logo64a.bmp lilo-22.8/sample/logo64a.dat lilo-22.8/sample/lilo.raid.conf lilo-22.8/sample/lilo.sample.conf lilo-22.8/sample/blue.bmp lilo-22.8/sample/blue.dat lilo-22.8/sample/README lilo-22.8/diagnose/bios.c lilo-22.8/diagnose/cprintf.c lilo-22.8/diagnose/test4.c lilo-22.8/diagnose/test5.c lilo-22.8/diagnose/sector.S lilo-22.8/diagnose/GPLicence lilo-22.8/diagnose/LGPLicence lilo-22.8/diagnose/README lilo-22.8/diagnose/README.diagnostic lilo-22.8/diagnose/Makefile lilo-22.8/manPages/lilo.8 lilo-22.8/manPages/lilo.conf.5 lilo-22.8/manPages/mkrescue.8 lilo-22.8/dos/README lilo-22.8/dos/Makefile lilo-22.8/doc/README lilo-22.8/doc/Makefile lilo-22.8/doc/bootloader.tex lilo-22.8/doc/image.tex lilo-22.8/doc/map.tex lilo-22.8/doc/other.tex lilo-22.8/doc/parameter.tex lilo-22.8/doc/tech.tex lilo-22.8/doc/user.tex lilo-22.8/doc/bootloader.fig lilo-22.8/doc/image.fig lilo-22.8/doc/map.fig lilo-22.8/doc/other.fig lilo-22.8/doc/parameter.fig lilo-22.8/doc/fullpage.sty lilo-22.8/doc/rlatex lilo-22.8/doc/t2a.pl root:/mnt/clfs/sources-clfsX64Jn08# cd lilo-22.8 root:/mnt/clfs/sources-clfsX64Jn08/lilo-22.8# root:/mnt/clfs/sources-clfsX64Jn08# cd lilo-22.8 root:/mnt/clfs/sources-clfsX64Jn08/lilo-22.8# patch -Np1 -i ../patches-clfsX64Jn08/lilo-22.8-cross_compile_x86_64-1.patch patching file Makefile Hunk #1 succeeded at 109 with fuzz 2 (offset 15 lines). Hunk #2 succeeded at 456 (offset 32 lines). root:/mnt/clfs/sources-clfsX64Jn08/lilo-22.8# make lilo.static ./checkit GCC version 2.91 or later is required gcc version 4.1.2 OKAY AS86 version 0.16.10 or later is required as86 is not present LD86 version 0.16.10 or later is required ld86 is not present BCC version 0.16.10 or later is recommended bcc is not present You will not be able to make floppy2, diag2.img, or lilo.com make: *** [test.img] Error 1 root:/mnt/clfs/sources-clfsX64Jn08/lilo-22.8# Please note also that after manually placing the links for as86 and ld86 and installing lilo; a running lilo looked for /etc/lilo.conf not $CLFS/etc/lilo.conf. This may be helpful in any update of the patch. > > clfs:~$ /tools/bin/gcc -v > > /tools/bin/gcc: error while loading shared libraries: libgcc_s.so.1: > > cannot open shared object file: No such file or directory > > clfs:~$ > > > > ##and libgcc_S.so.1 was not found > > > > > > suggestions of a fix would be welcomed > > My suggestion is that you do what it says in section 8.8, or if you > think you have already done that, make sure all the symlinks are > actually present in the correct directories, and also that the files > they point to are present. > > Perhaps I should point out that very little in the (trunk) books > is optional. So, make sure that you follow all the instructions, > and take whatever measures will enable you to check that things > worked. > > If you are scripting the build, check the status ($?) of commands. > If you are typing them in, you should be able to see the error > messages when things fail. > > ĸen ------------------------------------------------------- _______________________________________________ Clfs-support mailing list Clfs-support@lists.cross-lfs.org http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org
