Nicholai Vesterløkke 写道:
Hi
After going through all the steps in the book I only miss to see the
system boot :(
I'm using a custom made board based on Cirrus Logic edp9307A, and i
have no problems getting the small Cirrus logic distro to run on the
board.
During the compile I had problems with the ABI-variable none of the
listed worked, soo after reading
The post [Clfs-support] First try with CLFS embedded for ARM - first
comments
>During the buil process I've got the error message that the -m32 which
>is mentioned in chapter 6.3. ABI Variables is not accepted by the gcc
>for ARM. Instead of this there are several posibilities - I've coosen:
>export BUILD="-mabi=aapcs-linux"
I managed to finish the compilation.
But after I moved the system and kernel to the board nothing happens,
it doesn't even start with the Uncompressing Linux......
Any ideas?
Regards
Nicholai
------------------------------------------------------------------------
_______________________________________________
Clfs-support mailing list
[email protected]
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org
"Uncompressing Linux......"
Then the problem would be the kernel: kernel configurations, and your
monitor configurations etc. You may read the book
《Building Embedded Linux Systems》 to find out what's the problem.
_______________________________________________
Clfs-support mailing list
[email protected]
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org
