Hi Eddie It works fine. I'm glad to it's fixed.
But I got a slightly different problem after update to current version of click. Actually I'm using linux-2.6.16.22 with linux-2.6.13.2 click patch. Although linux-2.6.16.22 doesn't have netif_tx_lock function, click configure made config-linuxmodule.h with '#define HAVE_NETIF_TX_LOCK 1'. For the test, I built a linuxmodule with manually fixed config-linuxmodule.h. Jason Park. -----Original Message----- From: Eddie Kohler [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 06, 2007 6:45 AM To: Jason Park Cc: 'Click list' Subject: Re: [Click] No carrier e1000 + linux ToDevice element Hi Jason, Thanks so much for this patch. I'm just processing it, and have attached the version I've applied, which is slightly different. Does it also work for you? Hope so. Eddie Jason Park wrote: > Hi again. > > For me linuxmodule ToDevice element use 100% of cpu usage when no-carrier > situation. > Before configure click, make interface up & no-carrier, then configure click > and then it happened. > > I am using e1000 driver in e1000-5.x (polling patched). > And here is my click config. > > FromDevice(eth3) > -> Queue > -> Strip(14) > -> EtherEncap(0x0800, 00:90:FB:03:37:B6, 00:15:F2:57:27:01) > -> Counter > -> ToDevice(eth3) > > Patch attached as file. > I'll be pleased, if attached patch assist in project. > > Jason Park. _______________________________________________ click mailing list click@amsterdam.lcs.mit.edu https://amsterdam.lcs.mit.edu/mailman/listinfo/click
