Joonwoo, It's okay. It will be the performance using real network IO that really matters.
My use of the FastUDPSource element worked partially. It was only when trying to send data past a certain rate that the Kernel would crash within a couple seconds. I forget exactly what the rate was, but I believe it was between 3-4 gbp/s. Actually I think it was just over 400 MiB/s as that was where I saw the gnome system monitor run into problems. I'll look a little at the code later and maybe if we talk after we can figure out a good solution. I can't put that much time into it, but at least you figured out the crash fix already so it may not be too difficult. -Tom On Tue, Apr 14, 2009 at 5:43 PM, Joonwoo Park <[email protected]> wrote: > Tom, > > On Tue, Apr 14, 2009 at 4:30 PM, Tom Gibson <[email protected]> > wrote: > > Joonwoo, > > > > At least FastUDPSource is mainly for performance / benchmark type testing > > and nothing that critical. The performance change seems pretty drastic > > (over 15 times slower) so I don't know what the right answer is as far as > > making a patch. Maybe it's just something to track for now in the bug > list. > > As a matter of fact, I don't know either :( > But as I mentioned earlier, we might need to fix this problem rather > than having crashing kernel at least we support bond device. > I'll be happy if someone on this thread give a better direction. > > BTW, maybe I don't quiet follow this discussion. How did you measure > the performance without this patch? > > > > > I'll do some more testing with InfiniteSource and some other elements to > and > > let you know if I get any good information. > > > > Thanks for your work this past weekend getting that patch. > > Your very welcome. I'm sorry for that I couldn't give you a perfect > solution. > > Joonwoo. > > > > > -Tom > > > > On Tue, Apr 14, 2009 at 11:26 AM, Joonwoo Park <[email protected]> > > wrote: > >> > >> Tom, > >> > >> Good to hear your good news. > >> About the performance, I don't know how the other people think, we > >> probably improve FastUDPSource with alternative way something like use > >> skb list to avoid waiting for skb is released. > >> However I think you might get more performance with using multiple > >> instances of FastUDPSource at the same time. > >> If you do that, you might have additional benefit of multi-threaded > >> click as well. I guess > >> > >> Joonwoo > >> > >> On Mon, Apr 13, 2009 at 4:22 PM, Tom Gibson <[email protected]> > >> wrote: > >> > Joonwoo, > >> > > >> > I only just now got in the office to test it. The VPN was giving me > >> > problems yesterday. > >> > > >> > The good news is with the patch it doesn't crash anymore. The bad > news > >> > is > >> > that it seems to generate traffic much slower than expected. > >> > > >> > I have 3 Gigabit ports bonded and it seems to max out around 25 MiB/s > >> > which > >> > is nowhere near line rate for even a single Gig port. > >> > > >> > -Tom > >> > > >> > On Sat, Apr 11, 2009 at 10:40 PM, Joonwoo Park <[email protected] > > > >> > wrote: > >> >> > >> >> Tom, Can you please test this patch? > >> >> > >> >> Eddie, I think the FastUDPSource shouldn't recycle skb until we make > >> >> sure the skb is freed. > >> >> In case of bonddev's hard_start_xmit, it is queuing skb which is > >> >> possible not to freed until next calling of FastUDPSource::pull. > >> >> So this patch makes FastUDPSource::pull to check the skb is good to > >> >> recycle. > >> >> > >> >> BTW, I think the thread problem that I mentioned on this thread > wasn't > >> >> problem. It looks like I made a mistake to make a click config. > >> >> Sorry for that. > >> >> > >> >> Joonwoo > >> >> > >> >> On Tue, Apr 7, 2009 at 1:16 PM, Tom Gibson <[email protected]> > >> >> wrote: > >> >> > Joonwoo, > >> >> > > >> >> > I tried to reply from my phone, but it looks like it didn't work. > >> >> > > >> >> > I looked into this a bit more and found that GDB reports the crash > >> >> > happening > >> >> > during execution of line 758 in skbuff.h: > >> >> > > >> >> > static inline struct sk_buff *__skb_dequeue(struct sk_buff_head > >> >> > *list) > >> >> > { > >> >> > struct sk_buff *next, *prev, *result; > >> >> > > >> >> > prev = (struct sk_buff *) list; > >> >> > next = prev->next; > >> >> > result = NULL; > >> >> > if (next != prev) { > >> >> > result = next; > >> >> > next = next->next; > >> >> > list->qlen--; > >> >> > next->prev = prev; <------- > >> >> > prev->next = next; > >> >> > result->next = result->prev = NULL; > >> >> > } > >> >> > return result; > >> >> > } > >> >> > > >> >> > Is the code missing a NULL pointer check? Is Linux designed so the > >> >> > sk_buff->next field is always suposed to be a valid pointer? > >> >> > > >> >> > This latest test was using the click 1.7 rc1 version + your patches > >> >> > for > >> >> > E1000e NAPI polling mode. I migrated your posted patch to a new > >> >> > patch > >> >> > file > >> >> > for the 1.7 rc1 version. It's actually my first time making a > patch > >> >> > file > >> >> > :) > >> >> > > >> >> > The E1000e driver is doing good so far. If I set my click config > to > >> >> > use > >> >> > 4 > >> >> > seperate UDP blasters, working on individual ethX ports, I don't > get > >> >> > any > >> >> > crash and it goes fine at 4gbps. Gnome's System Monitor wont stay > >> >> > open > >> >> > if > >> >> > you go over 400MiB/s though lol. > >> >> > > >> >> > I'm wondering if the crash could be from something patched in a > newer > >> >> > kernel > >> >> > version. I'm learning a bit about diffutils, but I'm still not > ready > >> >> > to > >> >> > attempt porting the click patches to the latest kernel. I guess I > >> >> > can > >> >> > at > >> >> > least get the latest stable kernel and do a diff on skbuff.h. > >> >> > > >> >> > If you have any other tips or want me to run some test(s), let me > >> >> > know. > >> >> > > >> >> > Thanks, > >> >> > > >> >> > Tom > >> >> > > >> >> > > >> >> > On Mon, Apr 6, 2009 at 8:58 PM, Tom Gibson < > [email protected]> > >> >> > wrote: > >> >> >> > >> >> >> I'll find out tomorrow and send you an e-mail. > >> >> >> > >> >> >> That's some good info on how to get the source code line. Thanks. > >> >> >> > >> >> >> -Tom > >> >> >> > >> >> >> On Mon, Apr 6, 2009 at 8:50 PM, Joonwoo Park < > [email protected]> > >> >> >> wrote: > >> >> >>> > >> >> >>> Hi Tom > >> >> >>> > >> >> >>> On Mon, Apr 6, 2009 at 7:56 PM, Tom Gibson > >> >> >>> <[email protected]> > >> >> >>> wrote: > >> >> >>> > It's easy to reproduce. It happens within a second of > installing > >> >> >>> > Click > >> >> >>> > if I > >> >> >>> > use the bonding driver and transmit too fast. It's a 2x > >> >> >>> > quad-core > >> >> >>> > server so > >> >> >>> > I don't know if the SMP characteristics will be a lot different > >> >> >>> > than > >> >> >>> > a > >> >> >>> > single quadcore. > >> >> >>> > > >> >> >>> > I can setup remote access to my servers through a VPN if you're > >> >> >>> > interested. > >> >> >>> > I'm not sure the best way to debug this type of Kernel thing. > >> >> >>> > I've > >> >> >>> > been > >> >> >>> > wondering about using GDB stubs through an RS232 cable or > >> >> >>> > something. > >> >> >>> > > >> >> >>> > >> >> >>> FYI, you can know the exact source code line with following steps > >> >> >>> go to linux dir > >> >> >>> $ make menuconfig -> kernel hacking -> select 'Compile the kernel > >> >> >>> with > >> >> >>> debug info' and 'Compile the kernel with frame pointer' > >> >> >>> then build linux, install and then reboot with new kernel > >> >> >>> go to click dir > >> >> >>> do configure again with same configure command line which you > have > >> >> >>> been > >> >> >>> using > >> >> >>> $ make clean > >> >> >>> $ make install > >> >> >>> and run click with your config file. > >> >> >>> > >> >> >>> And if you can get kernel oops again > >> >> >>> $ gdb vmlinux (if the oops occurs from kernel itself) > >> >> >>> or > >> >> >>> $ gdb click.ko (if the oops occurs from click itself but your > >> >> >>> previous > >> >> >>> call stack said that the oops came from kernel) > >> >> >>> > >> >> >>> from gdb shell type: > >> >> >>> info line *<address of function> (ie. from your dump, type: info > >> >> >>> line > >> >> >>> *pfifo_fast_dequeue+0x48) > >> >> >>> > >> >> >>> Hopefully will give you a hint. Please let me know which line is > >> >> >>> making > >> >> >>> oops. > >> >> >>> > >> >> >>> Joonwoo > >> >> >>> > >> >> >>> > -Tom > >> >> >>> > > >> >> >>> > On Mon, Apr 6, 2009 at 5:14 PM, Joonwoo Park > >> >> >>> > <[email protected]> > >> >> >>> > wrote: > >> >> >>> >> > >> >> >>> >> Hi folks, > >> >> >>> >> > >> >> >>> >> I've tried to reproduce kernel oops with your kernel config > and > >> >> >>> >> click > >> >> >>> >> config. > >> >> >>> >> However I couldn't reproduce kernel oops unfortunately. I was > >> >> >>> >> guessing bonded device cause a problem. > >> >> >>> >> But for me I didn't happen. I'm using qemu to test click at > >> >> >>> >> this > >> >> >>> >> time > >> >> >>> >> because I'm not seeing any hardware specific involvement with > >> >> >>> >> your > >> >> >>> >> call stack trace. (but probably I'm wrong) > >> >> >>> >> Tom, does the problem (kernel oops) is always repeatable? > >> >> >>> >> > >> >> >>> >> BTW, I think we have another problem or possible regression. > >> >> >>> >> With the latest git version of click, although I'm using > single > >> >> >>> >> threaded config with SMP linux. I can see ToDevice which > stops > >> >> >>> >> pulling packets in few minutes. > >> >> >>> >> I believed that we (actually Eddie) had fixed this problem few > >> >> >>> >> months > >> >> >>> >> ago completely, but it looks like we hadn't :-( > >> >> >>> >> Eddie, do you have any idea? > >> >> >>> >> > >> >> >>> >> Joonwoo > >> >> >>> >> > >> >> >>> >> On Thu, Apr 2, 2009 at 8:45 PM, Tom Gibson > >> >> >>> >> <[email protected]> > >> >> >>> >> wrote: > >> >> >>> >> > I didn't get around to patching my driver for polling mode > >> >> >>> >> > yet, > >> >> >>> >> > but > >> >> >>> >> > I > >> >> >>> >> > did > >> >> >>> >> > try adding a FromDevice() -> Discard line to my config. > Using > >> >> >>> >> > the > >> >> >>> >> > bonding > >> >> >>> >> > ethernet device, it didn't help, the Kernel still locked up. > >> >> >>> >> > > >> >> >>> >> > After rebooting I tried running a seperate UDP traffic > >> >> >>> >> > generator > >> >> >>> >> > for > >> >> >>> >> > each > >> >> >>> >> > individual eth device (all using E1000 driver) also with the > >> >> >>> >> > FromDevice > >> >> >>> >> > line > >> >> >>> >> > included. I was happy to see this worked. Tomorrow when > back > >> >> >>> >> > in > >> >> >>> >> > the > >> >> >>> >> > office > >> >> >>> >> > I'll report if removing the FromDevice line causes the > Kernel > >> >> >>> >> > to > >> >> >>> >> > crash > >> >> >>> >> > or > >> >> >>> >> > not. Hopefully I'll also get migrated to the patched E1000e > >> >> >>> >> > driver > >> >> >>> >> > to. > >> >> >>> >> > > >> >> >>> >> > -Tom > >> >> >>> >> > > >> >> >>> >> > On Thu, Apr 2, 2009 at 8:45 AM, Joonwoo Park > >> >> >>> >> > <[email protected]> > >> >> >>> >> > wrote: > >> >> >>> >> >> > >> >> >>> >> >> On Thu, Apr 2, 2009 at 12:44 AM, Tom Gibson > >> >> >>> >> >> <[email protected]> > >> >> >>> >> >> wrote: > >> >> >>> >> >> > Ok. Thanks Joonwoo. I guess I read your name wrong > >> >> >>> >> >> > before, > >> >> >>> >> >> > sorry. > >> >> >>> >> >> > :) > >> >> >>> >> >> > > >> >> >>> >> >> > >> >> >>> >> >> Never mind Tom :-) > >> >> >>> >> >> > >> >> >>> >> >> > Does it matter that I haven't applied the polling mode > >> >> >>> >> >> > patch > >> >> >>> >> >> > to > >> >> >>> >> >> > my > >> >> >>> >> >> > E1000 > >> >> >>> >> >> > driver? Will PollDevice work correctly regardless? I'm > >> >> >>> >> >> > just > >> >> >>> >> >> > using > >> >> >>> >> >> > the > >> >> >>> >> >> > driver that came with the Kernel, although NAPI is > enabled. > >> >> >>> >> >> > > >> >> >>> >> >> > >> >> >>> >> >> Yes it does. To use PollDevice element you should patch > your > >> >> >>> >> >> e1000 > >> >> >>> >> >> driver. > >> >> >>> >> >> There are bunch of patches for the e1000 driver. > >> >> >>> >> >> You could you patch from click git for older version of > e1000 > >> >> >>> >> >> driver. > >> >> >>> >> >> Otherwise you can unofficial version of patches. > >> >> >>> >> >> I released both of e1000, e1000e driver on the list. > >> >> >>> >> >> > >> >> >>> >> >> > I hadn't thought about it until now. How does polling > mode > >> >> >>> >> >> > work > >> >> >>> >> >> > with > >> >> >>> >> >> > the > >> >> >>> >> >> > bonding ethernet driver? I wonder if that needs a > special > >> >> >>> >> >> > polling > >> >> >>> >> >> > mode > >> >> >>> >> >> > patch to run in Click with optimal performance. > >> >> >>> >> >> > > >> >> >>> >> >> > >> >> >>> >> >> Unfortunately you cannot use linux bonding under click > >> >> >>> >> >> polling > >> >> >>> >> >> mode. > >> >> >>> >> >> You should use FromDevice. eg) FromDevice(bond0). > >> >> >>> >> >> Otherwise you may write your own bonding element for click > to > >> >> >>> >> >> implement your own bonding system to use PollDevice > >> >> >>> >> >> > >> >> >>> >> >> Joonwoo > >> >> >>> >> >> > >> >> >>> >> >> > -Tom > >> >> >>> >> >> > > >> >> >>> >> >> > On Wed, Apr 1, 2009 at 10:36 PM, Joonwoo Park > >> >> >>> >> >> > <[email protected]> > >> >> >>> >> >> > wrote: > >> >> >>> >> >> >> > >> >> >>> >> >> >> The PollDevice might help you to *evade* your problem. > >> >> >>> >> >> >> But it looks like click has a bug which we have to fix. > >> >> >>> >> >> >> > >> >> >>> >> >> >> Generally speaking. > >> >> >>> >> >> >> PollDevice performs much better performance than > >> >> >>> >> >> >> FromDevice. > >> >> >>> >> >> >> And it uses other mechanism compare to FromDevice. > >> >> >>> >> >> >> In your case, as Roman pointed out, if you try to put > >> >> >>> >> >> >> PollDevice, > >> >> >>> >> >> >> even > >> >> >>> >> >> >> if it does nothing except drops packets will change your > >> >> >>> >> >> >> router's > >> >> >>> >> >> >> behavior. > >> >> >>> >> >> >> > >> >> >>> >> >> >> BTW, I'm Joonwoo :-) > >> >> >>> >> >> >> > >> >> >>> >> >> >> On Wed, Apr 1, 2009 at 10:24 PM, Tom Gibson > >> >> >>> >> >> >> <[email protected]> > >> >> >>> >> >> >> wrote: > >> >> >>> >> >> >> > Ok, I'll give that a try tomorrow when I'm at the > >> >> >>> >> >> >> > office. > >> >> >>> >> >> >> > I > >> >> >>> >> >> >> > really > >> >> >>> >> >> >> > appreciate the help from you and Johnwoo. I never > would > >> >> >>> >> >> >> > have > >> >> >>> >> >> >> > thought > >> >> >>> >> >> >> > of > >> >> >>> >> >> >> > having to include PollDevice(). I'll hopefully get > >> >> >>> >> >> >> > around > >> >> >>> >> >> >> > to > >> >> >>> >> >> >> > trying > >> >> >>> >> >> >> > Johnwoo's E1000e driver patch very soon. > >> >> >>> >> >> >> > > >> >> >>> >> >> >> > Do you know the reason why PollDevice is required? > Does > >> >> >>> >> >> >> > it > >> >> >>> >> >> >> > cause > >> >> >>> >> >> >> > some > >> >> >>> >> >> >> > FIFO > >> >> >>> >> >> >> > / queue to fill up which then causes problems? My > setup > >> >> >>> >> >> >> > may > >> >> >>> >> >> >> > have > >> >> >>> >> >> >> > been > >> >> >>> >> >> >> > getting back tons of destination port unreachable > >> >> >>> >> >> >> > packets > >> >> >>> >> >> >> > which I > >> >> >>> >> >> >> > hadn't > >> >> >>> >> >> >> > thought about. > >> >> >>> >> >> >> > > >> >> >>> >> >> >> > -Tom > >> >> >>> >> >> >> > > >> >> >>> >> >> >> > On Wed, Apr 1, 2009 at 7:03 PM, Roman Chertov > >> >> >>> >> >> >> > <[email protected]> > >> >> >>> >> >> >> > wrote: > >> >> >>> >> >> >> >> > >> >> >>> >> >> >> >> Change your config to use PollDevice. That should > >> >> >>> >> >> >> >> enable > >> >> >>> >> >> >> >> polling > >> >> >>> >> >> >> >> on > >> >> >>> >> >> >> >> the > >> >> >>> >> >> >> >> interface. (You have to do it this way, even if you > >> >> >>> >> >> >> >> don't > >> >> >>> >> >> >> >> care > >> >> >>> >> >> >> >> about > >> >> >>> >> >> >> >> receiving packets) > >> >> >>> >> >> >> >> > >> >> >>> >> >> >> >> elementclass UDPGen { > >> >> >>> >> >> >> >> $device, $rate, $limit, $size, > >> >> >>> >> >> >> >> $seth, $sip, $sport, $deth, $dip, $dport | > >> >> >>> >> >> >> >> > >> >> >>> >> >> >> >> srcudp :: FastUDPSource($rate, $limit, $size, $seth, > >> >> >>> >> >> >> >> $sip, > >> >> >>> >> >> >> >> $sport, > >> >> >>> >> >> >> >> $deth, > >> >> >>> >> >> >> >> $dip, > >> >> >>> >> >> >> >> $dport); > >> >> >>> >> >> >> >> srcudp -> td :: ToDevice($device); > >> >> >>> >> >> >> >> PollDevice($device) -> Discard; > >> >> >>> >> >> >> >> } > >> >> >>> >> >> >> >> > >> >> >>> >> >> >> >> Roman > >> >> >>> >> >> >> >> > >> >> >>> >> >> >> >> Tom Gibson wrote: > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> Here's my click config. It's a slightly modified > >> >> >>> >> >> >> >>> version > >> >> >>> >> >> >> >>> of > >> >> >>> >> >> >> >>> the > >> >> >>> >> >> >> >>> UDP > >> >> >>> >> >> >> >>> blaster script. > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> elementclass UDPGen { > >> >> >>> >> >> >> >>> $device, $rate, $limit, $size, > >> >> >>> >> >> >> >>> $seth, $sip, $sport, $deth, $dip, $dport | > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> srcudp :: FastUDPSource($rate, $limit, $size, > $seth, > >> >> >>> >> >> >> >>> $sip, > >> >> >>> >> >> >> >>> $sport, > >> >> >>> >> >> >> >>> > $deth, > >> >> >>> >> >> >> >>> $dip, > >> >> >>> >> >> >> >>> $dport); > >> >> >>> >> >> >> >>> srcudp -> td :: ToDevice($device); > >> >> >>> >> >> >> >>> } > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> /* using 1362 byte packets > >> >> >>> >> >> >> >>> 1gbps = 91777 pkts/sec > >> >> >>> >> >> >> >>> 2gbps = 183554 pkts/sec > >> >> >>> >> >> >> >>> 3gbps = 275330 pkts/sec > >> >> >>> >> >> >> >>> 4gbps = 367107 pkts/sec > >> >> >>> >> >> >> >>> 5gbps = 458884 pkts/sec > >> >> >>> >> >> >> >>> */ > >> >> >>> >> >> >> >>> u :: UDPGen(bond0, 367107, 36710700, 1358, > >> >> >>> >> >> >> >>> 00:1f:c6:6c:d5:ca, 192.168.220.1, 1234, > >> >> >>> >> >> >> >>> 00:1f:c6:23:48:a6, 192.168.220.2, 1234); > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> On Wed, Apr 1, 2009 at 5:01 PM, Joonwoo Park > >> >> >>> >> >> >> >>> <[email protected] > >> >> >>> >> >> >> >>> <mailto:[email protected]>> wrote: > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> Sounds you are using FromDevice. > >> >> >>> >> >> >> >>> Is it possible to post your click config as well? > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> Joonwoo > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> On Wed, Apr 1, 2009 at 4:57 PM, Tom Gibson > >> >> >>> >> >> >> >>> <[email protected] > >> >> >>> >> >> >> >>> <mailto:[email protected]>> wrote: > >> >> >>> >> >> >> >>> > Sorry for the delayed response. I've been out > >> >> >>> >> >> >> >>> of > >> >> >>> >> >> >> >>> the > >> >> >>> >> >> >> >>> office > >> >> >>> >> >> >> >>> a > >> >> >>> >> >> >> >>> lot and when > >> >> >>> >> >> >> >>> > I first got this the PC running Click wasn't > on > >> >> >>> >> >> >> >>> the > >> >> >>> >> >> >> >>> Internet. > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > I was / am running the E1000 driver that comes > >> >> >>> >> >> >> >>> in > >> >> >>> >> >> >> >>> the > >> >> >>> >> >> >> >>> 2.6.24-7 > >> >> >>> >> >> >> >>> Kernel. The > >> >> >>> >> >> >> >>> > Kernel is the same as on kernel.org > >> >> >>> >> >> >> >>> <http://kernel.org> > >> >> >>> >> >> >> >>> except > >> >> >>> >> >> >> >>> for the click patch was applied. > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > Below is my config I used to build the Kernel: > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Automatically generated make config: don't > >> >> >>> >> >> >> >>> edit > >> >> >>> >> >> >> >>> > # Linux kernel version: 2.6.24.7 > >> >> >>> >> >> >> >>> > # Tue Mar 10 17:46:31 2009 > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_64BIT=y > >> >> >>> >> >> >> >>> > # CONFIG_X86_32 is not set > >> >> >>> >> >> >> >>> > CONFIG_X86_64=y > >> >> >>> >> >> >> >>> > CONFIG_X86=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_TIME=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_CMOS_UPDATE=y > >> >> >>> >> >> >> >>> > CONFIG_CLOCKSOURCE_WATCHDOG=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y > >> >> >>> >> >> >> >>> > CONFIG_LOCKDEP_SUPPORT=y > >> >> >>> >> >> >> >>> > CONFIG_STACKTRACE_SUPPORT=y > >> >> >>> >> >> >> >>> > CONFIG_SEMAPHORE_SLEEPERS=y > >> >> >>> >> >> >> >>> > CONFIG_MMU=y > >> >> >>> >> >> >> >>> > CONFIG_ZONE_DMA=y > >> >> >>> >> >> >> >>> > # CONFIG_QUICKLIST is not set > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_ISA_DMA=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_IOMAP=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_BUG=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_HWEIGHT=y > >> >> >>> >> >> >> >>> > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > >> >> >>> >> >> >> >>> > CONFIG_DMI=y > >> >> >>> >> >> >> >>> > CONFIG_RWSEM_GENERIC_SPINLOCK=y > >> >> >>> >> >> >> >>> > # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set > >> >> >>> >> >> >> >>> > # CONFIG_ARCH_HAS_ILOG2_U32 is not set > >> >> >>> >> >> >> >>> > # CONFIG_ARCH_HAS_ILOG2_U64 is not set > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_CALIBRATE_DELAY=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_TIME_VSYSCALL=y > >> >> >>> >> >> >> >>> > CONFIG_ARCH_SUPPORTS_OPROFILE=y > >> >> >>> >> >> >> >>> > CONFIG_ZONE_DMA32=y > >> >> >>> >> >> >> >>> > CONFIG_ARCH_POPULATES_NODE_MAP=y > >> >> >>> >> >> >> >>> > CONFIG_AUDIT_ARCH=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_HARDIRQS=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_IRQ_PROBE=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_PENDING_IRQ=y > >> >> >>> >> >> >> >>> > CONFIG_X86_HT=y > >> >> >>> >> >> >> >>> > # CONFIG_KTIME_SCALAR is not set > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> > >> >> >>> >> >> >> >>> > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # General setup > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_EXPERIMENTAL=y > >> >> >>> >> >> >> >>> > CONFIG_LOCK_KERNEL=y > >> >> >>> >> >> >> >>> > CONFIG_INIT_ENV_ARG_LIMIT=32 > >> >> >>> >> >> >> >>> > CONFIG_LOCALVERSION="" > >> >> >>> >> >> >> >>> > # CONFIG_LOCALVERSION_AUTO is not set > >> >> >>> >> >> >> >>> > CONFIG_SWAP=y > >> >> >>> >> >> >> >>> > CONFIG_SYSVIPC=y > >> >> >>> >> >> >> >>> > CONFIG_SYSVIPC_SYSCTL=y > >> >> >>> >> >> >> >>> > CONFIG_POSIX_MQUEUE=y > >> >> >>> >> >> >> >>> > CONFIG_BSD_PROCESS_ACCT=y > >> >> >>> >> >> >> >>> > CONFIG_BSD_PROCESS_ACCT_V3=y > >> >> >>> >> >> >> >>> > CONFIG_TASKSTATS=y > >> >> >>> >> >> >> >>> > CONFIG_TASK_DELAY_ACCT=y > >> >> >>> >> >> >> >>> > CONFIG_TASK_XACCT=y > >> >> >>> >> >> >> >>> > CONFIG_TASK_IO_ACCOUNTING=y > >> >> >>> >> >> >> >>> > CONFIG_USER_NS=y > >> >> >>> >> >> >> >>> > CONFIG_PID_NS=y > >> >> >>> >> >> >> >>> > CONFIG_AUDIT=y > >> >> >>> >> >> >> >>> > CONFIG_AUDITSYSCALL=y > >> >> >>> >> >> >> >>> > CONFIG_AUDIT_TREE=y > >> >> >>> >> >> >> >>> > # CONFIG_IKCONFIG is not set > >> >> >>> >> >> >> >>> > CONFIG_LOG_BUF_SHIFT=17 > >> >> >>> >> >> >> >>> > CONFIG_CGROUPS=y > >> >> >>> >> >> >> >>> > # CONFIG_CGROUP_DEBUG is not set > >> >> >>> >> >> >> >>> > CONFIG_CGROUP_NS=y > >> >> >>> >> >> >> >>> > CONFIG_CPUSETS=y > >> >> >>> >> >> >> >>> > CONFIG_FAIR_GROUP_SCHED=y > >> >> >>> >> >> >> >>> > CONFIG_FAIR_USER_SCHED=y > >> >> >>> >> >> >> >>> > # CONFIG_FAIR_CGROUP_SCHED is not set > >> >> >>> >> >> >> >>> > CONFIG_CGROUP_CPUACCT=y > >> >> >>> >> >> >> >>> > CONFIG_SYSFS_DEPRECATED=y > >> >> >>> >> >> >> >>> > CONFIG_PROC_PID_CPUSET=y > >> >> >>> >> >> >> >>> > CONFIG_RELAY=y > >> >> >>> >> >> >> >>> > CONFIG_BLK_DEV_INITRD=y > >> >> >>> >> >> >> >>> > CONFIG_INITRAMFS_SOURCE="" > >> >> >>> >> >> >> >>> > CONFIG_CC_OPTIMIZE_FOR_SIZE=y > >> >> >>> >> >> >> >>> > CONFIG_SYSCTL=y > >> >> >>> >> >> >> >>> > # CONFIG_EMBEDDED is not set > >> >> >>> >> >> >> >>> > CONFIG_UID16=y > >> >> >>> >> >> >> >>> > CONFIG_SYSCTL_SYSCALL=y > >> >> >>> >> >> >> >>> > CONFIG_KALLSYMS=y > >> >> >>> >> >> >> >>> > # CONFIG_KALLSYMS_ALL is not set > >> >> >>> >> >> >> >>> > # CONFIG_KALLSYMS_EXTRA_PASS is not set > >> >> >>> >> >> >> >>> > CONFIG_HOTPLUG=y > >> >> >>> >> >> >> >>> > CONFIG_PRINTK=y > >> >> >>> >> >> >> >>> > CONFIG_BUG=y > >> >> >>> >> >> >> >>> > CONFIG_ELF_CORE=y > >> >> >>> >> >> >> >>> > CONFIG_BASE_FULL=y > >> >> >>> >> >> >> >>> > CONFIG_FUTEX=y > >> >> >>> >> >> >> >>> > CONFIG_ANON_INODES=y > >> >> >>> >> >> >> >>> > CONFIG_EPOLL=y > >> >> >>> >> >> >> >>> > CONFIG_SIGNALFD=y > >> >> >>> >> >> >> >>> > CONFIG_EVENTFD=y > >> >> >>> >> >> >> >>> > CONFIG_SHMEM=y > >> >> >>> >> >> >> >>> > CONFIG_VM_EVENT_COUNTERS=y > >> >> >>> >> >> >> >>> > CONFIG_SLAB=y > >> >> >>> >> >> >> >>> > # CONFIG_SLUB is not set > >> >> >>> >> >> >> >>> > # CONFIG_SLOB is not set > >> >> >>> >> >> >> >>> > CONFIG_SLABINFO=y > >> >> >>> >> >> >> >>> > CONFIG_RT_MUTEXES=y > >> >> >>> >> >> >> >>> > # CONFIG_TINY_SHMEM is not set > >> >> >>> >> >> >> >>> > CONFIG_BASE_SMALL=0 > >> >> >>> >> >> >> >>> > CONFIG_MODULES=y > >> >> >>> >> >> >> >>> > CONFIG_MODULE_UNLOAD=y > >> >> >>> >> >> >> >>> > CONFIG_MODULE_FORCE_UNLOAD=y > >> >> >>> >> >> >> >>> > CONFIG_MODVERSIONS=y > >> >> >>> >> >> >> >>> > # CONFIG_MODULE_SRCVERSION_ALL is not set > >> >> >>> >> >> >> >>> > CONFIG_KMOD=y > >> >> >>> >> >> >> >>> > CONFIG_STOP_MACHINE=y > >> >> >>> >> >> >> >>> > CONFIG_BLOCK=y > >> >> >>> >> >> >> >>> > CONFIG_BLK_DEV_IO_TRACE=y > >> >> >>> >> >> >> >>> > CONFIG_BLK_DEV_BSG=y > >> >> >>> >> >> >> >>> > CONFIG_BLOCK_COMPAT=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # IO Schedulers > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_IOSCHED_NOOP=y > >> >> >>> >> >> >> >>> > CONFIG_IOSCHED_AS=y > >> >> >>> >> >> >> >>> > CONFIG_IOSCHED_DEADLINE=y > >> >> >>> >> >> >> >>> > CONFIG_IOSCHED_CFQ=y > >> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_AS is not set > >> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_DEADLINE is not set > >> >> >>> >> >> >> >>> > CONFIG_DEFAULT_CFQ=y > >> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_NOOP is not set > >> >> >>> >> >> >> >>> > CONFIG_DEFAULT_IOSCHED="cfq" > >> >> >>> >> >> >> >>> > CONFIG_PREEMPT_NOTIFIERS=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Processor type and features > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_TICK_ONESHOT=y > >> >> >>> >> >> >> >>> > CONFIG_NO_HZ=y > >> >> >>> >> >> >> >>> > CONFIG_HIGH_RES_TIMERS=y > >> >> >>> >> >> >> >>> > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y > >> >> >>> >> >> >> >>> > CONFIG_SMP=y > >> >> >>> >> >> >> >>> > CONFIG_X86_PC=y > >> >> >>> >> >> >> >>> > # CONFIG_X86_ELAN is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_VOYAGER is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_NUMAQ is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_SUMMIT is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_BIGSMP is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_VISWS is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_GENERICARCH is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_ES7000 is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_VSMP is not set > >> >> >>> >> >> >> >>> > # CONFIG_M386 is not set > >> >> >>> >> >> >> >>> > # CONFIG_M486 is not set > >> >> >>> >> >> >> >>> > # CONFIG_M586 is not set > >> >> >>> >> >> >> >>> > # CONFIG_M586TSC is not set > >> >> >>> >> >> >> >>> > # CONFIG_M586MMX is not set > >> >> >>> >> >> >> >>> > # CONFIG_M686 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MPENTIUMII is not set > >> >> >>> >> >> >> >>> > # CONFIG_MPENTIUMIII is not set > >> >> >>> >> >> >> >>> > # CONFIG_MPENTIUMM is not set > >> >> >>> >> >> >> >>> > # CONFIG_MPENTIUM4 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MK6 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MK7 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MK8 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MCRUSOE is not set > >> >> >>> >> >> >> >>> > # CONFIG_MEFFICEON is not set > >> >> >>> >> >> >> >>> > # CONFIG_MWINCHIPC6 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MWINCHIP2 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MWINCHIP3D is not set > >> >> >>> >> >> >> >>> > # CONFIG_MGEODEGX1 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MGEODE_LX is not set > >> >> >>> >> >> >> >>> > # CONFIG_MCYRIXIII is not set > >> >> >>> >> >> >> >>> > # CONFIG_MVIAC3_2 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MVIAC7 is not set > >> >> >>> >> >> >> >>> > # CONFIG_MPSC is not set > >> >> >>> >> >> >> >>> > CONFIG_MCORE2=y > >> >> >>> >> >> >> >>> > # CONFIG_GENERIC_CPU is not set > >> >> >>> >> >> >> >>> > CONFIG_X86_L1_CACHE_BYTES=64 > >> >> >>> >> >> >> >>> > CONFIG_X86_INTERNODE_CACHE_BYTES=64 > >> >> >>> >> >> >> >>> > CONFIG_X86_CMPXCHG=y > >> >> >>> >> >> >> >>> > CONFIG_X86_L1_CACHE_SHIFT=6 > >> >> >>> >> >> >> >>> > CONFIG_X86_GOOD_APIC=y > >> >> >>> >> >> >> >>> > CONFIG_X86_INTEL_USERCOPY=y > >> >> >>> >> >> >> >>> > CONFIG_X86_USE_PPRO_CHECKSUM=y > >> >> >>> >> >> >> >>> > CONFIG_X86_TSC=y > >> >> >>> >> >> >> >>> > CONFIG_X86_MINIMUM_CPU_FAMILY=64 > >> >> >>> >> >> >> >>> > CONFIG_HPET_TIMER=y > >> >> >>> >> >> >> >>> > CONFIG_GART_IOMMU=y > >> >> >>> >> >> >> >>> > CONFIG_CALGARY_IOMMU=y > >> >> >>> >> >> >> >>> > CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y > >> >> >>> >> >> >> >>> > CONFIG_SWIOTLB=y > >> >> >>> >> >> >> >>> > CONFIG_NR_CPUS=32 > >> >> >>> >> >> >> >>> > CONFIG_SCHED_SMT=y > >> >> >>> >> >> >> >>> > CONFIG_SCHED_MC=y > >> >> >>> >> >> >> >>> > CONFIG_PREEMPT_NONE=y > >> >> >>> >> >> >> >>> > # CONFIG_PREEMPT_VOLUNTARY is not set > >> >> >>> >> >> >> >>> > # CONFIG_PREEMPT is not set > >> >> >>> >> >> >> >>> > # CONFIG_PREEMPT_BKL is not set > >> >> >>> >> >> >> >>> > CONFIG_X86_LOCAL_APIC=y > >> >> >>> >> >> >> >>> > CONFIG_X86_IO_APIC=y > >> >> >>> >> >> >> >>> > CONFIG_X86_MCE=y > >> >> >>> >> >> >> >>> > CONFIG_X86_MCE_INTEL=y > >> >> >>> >> >> >> >>> > CONFIG_X86_MCE_AMD=y > >> >> >>> >> >> >> >>> > CONFIG_MICROCODE=m > >> >> >>> >> >> >> >>> > CONFIG_MICROCODE_OLD_INTERFACE=y > >> >> >>> >> >> >> >>> > CONFIG_X86_MSR=m > >> >> >>> >> >> >> >>> > CONFIG_X86_CPUID=m > >> >> >>> >> >> >> >>> > CONFIG_NUMA=y > >> >> >>> >> >> >> >>> > CONFIG_K8_NUMA=y > >> >> >>> >> >> >> >>> > CONFIG_X86_64_ACPI_NUMA=y > >> >> >>> >> >> >> >>> > # CONFIG_NUMA_EMU is not set > >> >> >>> >> >> >> >>> > CONFIG_NODES_SHIFT=6 > >> >> >>> >> >> >> >>> > CONFIG_ARCH_DISCONTIGMEM_ENABLE=y > >> >> >>> >> >> >> >>> > CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y > >> >> >>> >> >> >> >>> > CONFIG_ARCH_SPARSEMEM_ENABLE=y > >> >> >>> >> >> >> >>> > CONFIG_SELECT_MEMORY_MODEL=y > >> >> >>> >> >> >> >>> > # CONFIG_FLATMEM_MANUAL is not set > >> >> >>> >> >> >> >>> > # CONFIG_DISCONTIGMEM_MANUAL is not set > >> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM_MANUAL=y > >> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM=y > >> >> >>> >> >> >> >>> > CONFIG_NEED_MULTIPLE_NODES=y > >> >> >>> >> >> >> >>> > CONFIG_HAVE_MEMORY_PRESENT=y > >> >> >>> >> >> >> >>> > # CONFIG_SPARSEMEM_STATIC is not set > >> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM_EXTREME=y > >> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y > >> >> >>> >> >> >> >>> > CONFIG_SPARSEMEM_VMEMMAP=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Memory hotplug is currently incompatible > with > >> >> >>> >> >> >> >>> Software > >> >> >>> >> >> >> >>> Suspend > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_SPLIT_PTLOCK_CPUS=4 > >> >> >>> >> >> >> >>> > CONFIG_MIGRATION=y > >> >> >>> >> >> >> >>> > CONFIG_RESOURCES_64BIT=y > >> >> >>> >> >> >> >>> > CONFIG_ZONE_DMA_FLAG=1 > >> >> >>> >> >> >> >>> > CONFIG_BOUNCE=y > >> >> >>> >> >> >> >>> > CONFIG_VIRT_TO_BUS=y > >> >> >>> >> >> >> >>> > CONFIG_MTRR=y > >> >> >>> >> >> >> >>> > CONFIG_SECCOMP=y > >> >> >>> >> >> >> >>> > # CONFIG_CC_STACKPROTECTOR is not set > >> >> >>> >> >> >> >>> > # CONFIG_HZ_100 is not set > >> >> >>> >> >> >> >>> > CONFIG_HZ_250=y > >> >> >>> >> >> >> >>> > # CONFIG_HZ_300 is not set > >> >> >>> >> >> >> >>> > # CONFIG_HZ_1000 is not set > >> >> >>> >> >> >> >>> > CONFIG_HZ=250 > >> >> >>> >> >> >> >>> > CONFIG_KEXEC=y > >> >> >>> >> >> >> >>> > # CONFIG_CRASH_DUMP is not set > >> >> >>> >> >> >> >>> > CONFIG_PHYSICAL_START=0x200000 > >> >> >>> >> >> >> >>> > # CONFIG_RELOCATABLE is not set > >> >> >>> >> >> >> >>> > CONFIG_PHYSICAL_ALIGN=0x200000 > >> >> >>> >> >> >> >>> > CONFIG_HOTPLUG_CPU=y > >> >> >>> >> >> >> >>> > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y > >> >> >>> >> >> >> >>> > CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Power management options > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_ARCH_HIBERNATION_HEADER=y > >> >> >>> >> >> >> >>> > CONFIG_PM=y > >> >> >>> >> >> >> >>> > # CONFIG_PM_LEGACY is not set > >> >> >>> >> >> >> >>> > # CONFIG_PM_DEBUG is not set > >> >> >>> >> >> >> >>> > CONFIG_PM_SLEEP_SMP=y > >> >> >>> >> >> >> >>> > CONFIG_PM_SLEEP=y > >> >> >>> >> >> >> >>> > CONFIG_SUSPEND_SMP_POSSIBLE=y > >> >> >>> >> >> >> >>> > CONFIG_SUSPEND=y > >> >> >>> >> >> >> >>> > CONFIG_HIBERNATION_SMP_POSSIBLE=y > >> >> >>> >> >> >> >>> > CONFIG_HIBERNATION=y > >> >> >>> >> >> >> >>> > CONFIG_PM_STD_PARTITION="" > >> >> >>> >> >> >> >>> > CONFIG_ACPI=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_SLEEP=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_PROCFS=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_PROCFS_POWER=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_SYSFS_POWER=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_PROC_EVENT=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_AC=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_BATTERY=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_BUTTON=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_VIDEO=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_FAN=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_DOCK=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_BAY=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_PROCESSOR=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_HOTPLUG_CPU=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_THERMAL=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_NUMA=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_ASUS=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_TOSHIBA=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_BLACKLIST_YEAR=0 > >> >> >>> >> >> >> >>> > # CONFIG_ACPI_DEBUG is not set > >> >> >>> >> >> >> >>> > CONFIG_ACPI_EC=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_POWER=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_SYSTEM=y > >> >> >>> >> >> >> >>> > CONFIG_X86_PM_TIMER=y > >> >> >>> >> >> >> >>> > CONFIG_ACPI_CONTAINER=m > >> >> >>> >> >> >> >>> > CONFIG_ACPI_SBS=m > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # CPU Frequency scaling > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ=y > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_TABLE=m > >> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEBUG is not set > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_STAT=m > >> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_STAT_DETAILS is not set > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > >> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not > >> >> >>> >> >> >> >>> set > >> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not > >> >> >>> >> >> >> >>> set > >> >> >>> >> >> >> >>> > # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is > >> >> >>> >> >> >> >>> not > >> >> >>> >> >> >> >>> set > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_POWERSAVE=m > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_USERSPACE=m > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_ONDEMAND=m > >> >> >>> >> >> >> >>> > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # CPUFreq processor drivers > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_X86_ACPI_CPUFREQ=m > >> >> >>> >> >> >> >>> > CONFIG_X86_POWERNOW_K8=m > >> >> >>> >> >> >> >>> > CONFIG_X86_POWERNOW_K8_ACPI=y > >> >> >>> >> >> >> >>> > CONFIG_X86_SPEEDSTEP_CENTRINO=m > >> >> >>> >> >> >> >>> > # CONFIG_X86_P4_CLOCKMOD is not set > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # shared options > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set > >> >> >>> >> >> >> >>> > # CONFIG_X86_SPEEDSTEP_LIB is not set > >> >> >>> >> >> >> >>> > CONFIG_CPU_IDLE=y > >> >> >>> >> >> >> >>> > CONFIG_CPU_IDLE_GOV_LADDER=y > >> >> >>> >> >> >> >>> > CONFIG_CPU_IDLE_GOV_MENU=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Bus options (PCI etc.) > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_PCI=y > >> >> >>> >> >> >> >>> > CONFIG_PCI_DIRECT=y > >> >> >>> >> >> >> >>> > CONFIG_PCI_MMCONFIG=y > >> >> >>> >> >> >> >>> > CONFIG_PCI_DOMAINS=y > >> >> >>> >> >> >> >>> > # CONFIG_DMAR is not set > >> >> >>> >> >> >> >>> > CONFIG_PCIEPORTBUS=y > >> >> >>> >> >> >> >>> > CONFIG_PCIEAER=y > >> >> >>> >> >> >> >>> > CONFIG_ARCH_SUPPORTS_MSI=y > >> >> >>> >> >> >> >>> > CONFIG_PCI_MSI=y > >> >> >>> >> >> >> >>> > CONFIG_PCI_LEGACY=y > >> >> >>> >> >> >> >>> > # CONFIG_PCI_DEBUG is not set > >> >> >>> >> >> >> >>> > CONFIG_HT_IRQ=y > >> >> >>> >> >> >> >>> > CONFIG_ISA_DMA_API=y > >> >> >>> >> >> >> >>> > CONFIG_K8_NB=y > >> >> >>> >> >> >> >>> > # CONFIG_PCCARD is not set > >> >> >>> >> >> >> >>> > # CONFIG_HOTPLUG_PCI is not set > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Executable file formats / Emulations > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_BINFMT_ELF=y > >> >> >>> >> >> >> >>> > CONFIG_BINFMT_MISC=m > >> >> >>> >> >> >> >>> > CONFIG_IA32_EMULATION=y > >> >> >>> >> >> >> >>> > CONFIG_IA32_AOUT=y > >> >> >>> >> >> >> >>> > CONFIG_COMPAT=y > >> >> >>> >> >> >> >>> > CONFIG_COMPAT_FOR_U64_ALIGNMENT=y > >> >> >>> >> >> >> >>> > CONFIG_SYSVIPC_COMPAT=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Networking > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_NET=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Networking options > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_PACKET=y > >> >> >>> >> >> >> >>> > CONFIG_PACKET_MMAP=y > >> >> >>> >> >> >> >>> > CONFIG_UNIX=y > >> >> >>> >> >> >> >>> > CONFIG_XFRM=y > >> >> >>> >> >> >> >>> > CONFIG_XFRM_USER=m > >> >> >>> >> >> >> >>> > # CONFIG_XFRM_SUB_POLICY is not set > >> >> >>> >> >> >> >>> > # CONFIG_XFRM_MIGRATE is not set > >> >> >>> >> >> >> >>> > CONFIG_NET_KEY=m > >> >> >>> >> >> >> >>> > # CONFIG_NET_KEY_MIGRATE is not set > >> >> >>> >> >> >> >>> > CONFIG_INET=y > >> >> >>> >> >> >> >>> > CONFIG_IP_MULTICAST=y > >> >> >>> >> >> >> >>> > CONFIG_IP_ADVANCED_ROUTER=y > >> >> >>> >> >> >> >>> > CONFIG_ASK_IP_FIB_HASH=y > >> >> >>> >> >> >> >>> > # CONFIG_IP_FIB_TRIE is not set > >> >> >>> >> >> >> >>> > CONFIG_IP_FIB_HASH=y > >> >> >>> >> >> >> >>> > CONFIG_IP_MULTIPLE_TABLES=y > >> >> >>> >> >> >> >>> > CONFIG_IP_ROUTE_MULTIPATH=y > >> >> >>> >> >> >> >>> > CONFIG_IP_ROUTE_VERBOSE=y > >> >> >>> >> >> >> >>> > # CONFIG_IP_PNP is not set > >> >> >>> >> >> >> >>> > CONFIG_NET_IPIP=m > >> >> >>> >> >> >> >>> > CONFIG_NET_IPGRE=m > >> >> >>> >> >> >> >>> > CONFIG_NET_IPGRE_BROADCAST=y > >> >> >>> >> >> >> >>> > CONFIG_IP_MROUTE=y > >> >> >>> >> >> >> >>> > CONFIG_IP_PIMSM_V1=y > >> >> >>> >> >> >> >>> > CONFIG_IP_PIMSM_V2=y > >> >> >>> >> >> >> >>> > # CONFIG_ARPD is not set > >> >> >>> >> >> >> >>> > CONFIG_SYN_COOKIES=y > >> >> >>> >> >> >> >>> > CONFIG_INET_AH=m > >> >> >>> >> >> >> >>> > CONFIG_INET_ESP=m > >> >> >>> >> >> >> >>> > CONFIG_INET_IPCOMP=m > >> >> >>> >> >> >> >>> > CONFIG_INET_XFRM_TUNNEL=m > >> >> >>> >> >> >> >>> > CONFIG_INET_TUNNEL=m > >> >> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_TRANSPORT=m > >> >> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_TUNNEL=m > >> >> >>> >> >> >> >>> > CONFIG_INET_XFRM_MODE_BEET=m > >> >> >>> >> >> >> >>> > CONFIG_INET_LRO=m > >> >> >>> >> >> >> >>> > CONFIG_INET_DIAG=m > >> >> >>> >> >> >> >>> > CONFIG_INET_TCP_DIAG=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_ADVANCED=y > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_BIC=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_CUBIC=y > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_WESTWOOD=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_HTCP=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_HSTCP=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_HYBLA=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_VEGAS=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_SCALABLE=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_LP=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_VENO=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_YEAH=m > >> >> >>> >> >> >> >>> > CONFIG_TCP_CONG_ILLINOIS=m > >> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_BIC is not set > >> >> >>> >> >> >> >>> > CONFIG_DEFAULT_CUBIC=y > >> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_HTCP is not set > >> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_VEGAS is not set > >> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_WESTWOOD is not set > >> >> >>> >> >> >> >>> > # CONFIG_DEFAULT_RENO is not set > >> >> >>> >> >> >> >>> > CONFIG_DEFAULT_TCP_CONG="cubic" > >> >> >>> >> >> >> >>> > CONFIG_TCP_MD5SIG=y > >> >> >>> >> >> >> >>> > CONFIG_IP_VS=m > >> >> >>> >> >> >> >>> > # CONFIG_IP_VS_DEBUG is not set > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_TAB_BITS=12 > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # IPVS transport protocol load balancing > support > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_TCP=y > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_UDP=y > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_ESP=y > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_PROTO_AH=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # IPVS scheduler > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_RR=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_WRR=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_LC=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_WLC=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_LBLC=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_LBLCR=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_DH=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_SH=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_SED=m > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_NQ=m > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # IPVS application helper > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_IP_VS_FTP=m > >> >> >>> >> >> >> >>> > CONFIG_IPV6=m > >> >> >>> >> >> >> >>> > CONFIG_IPV6_PRIVACY=y > >> >> >>> >> >> >> >>> > CONFIG_IPV6_ROUTER_PREF=y > >> >> >>> >> >> >> >>> > CONFIG_IPV6_ROUTE_INFO=y > >> >> >>> >> >> >> >>> > CONFIG_IPV6_OPTIMISTIC_DAD=y > >> >> >>> >> >> >> >>> > CONFIG_INET6_AH=m > >> >> >>> >> >> >> >>> > CONFIG_INET6_ESP=m > >> >> >>> >> >> >> >>> > CONFIG_INET6_IPCOMP=m > >> >> >>> >> >> >> >>> > CONFIG_IPV6_MIP6=m > >> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_TUNNEL=m > >> >> >>> >> >> >> >>> > CONFIG_INET6_TUNNEL=m > >> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_TRANSPORT=m > >> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_TUNNEL=m > >> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_BEET=m > >> >> >>> >> >> >> >>> > CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m > >> >> >>> >> >> >> >>> > CONFIG_IPV6_SIT=m > >> >> >>> >> >> >> >>> > CONFIG_IPV6_TUNNEL=m > >> >> >>> >> >> >> >>> > CONFIG_IPV6_MULTIPLE_TABLES=y > >> >> >>> >> >> >> >>> > CONFIG_IPV6_SUBTREES=y > >> >> >>> >> >> >> >>> > # CONFIG_NETLABEL is not set > >> >> >>> >> >> >> >>> > CONFIG_NETWORK_SECMARK=y > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER=y > >> >> >>> >> >> >> >>> > # CONFIG_NETFILTER_DEBUG is not set > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_NETFILTER=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Core Netfilter Configuration > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK_QUEUE=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_NETLINK_LOG=m > >> >> >>> >> >> >> >>> > # CONFIG_NF_CONNTRACK_ENABLED is not set > >> >> >>> >> >> >> >>> > # CONFIG_NF_CONNTRACK is not set > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XTABLES=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_DSCP=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_MARK=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_NFLOG=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_TRACE=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_SECMARK=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_TARGET_TCPMSS=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_COMMENT=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_DCCP=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_DSCP=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_ESP=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_LENGTH=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_LIMIT=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MAC=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MARK=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_POLICY=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_QUOTA=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_REALM=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_SCTP=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_STATISTIC=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_STRING=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_TCPMSS=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_TIME=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_U32=m > >> >> >>> >> >> >> >>> > CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # IP: Netfilter Configuration > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_QUEUE=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_IPTABLES=m > >> >> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_IPRANGE is not set > >> >> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_TOS is not set > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_RECENT=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_ECN=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_AH=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_TTL=m > >> >> >>> >> >> >> >>> > # CONFIG_IP_NF_MATCH_OWNER is not set > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_MATCH_ADDRTYPE=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_FILTER=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_REJECT=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_LOG=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_ULOG=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_MANGLE=m > >> >> >>> >> >> >> >>> > # CONFIG_IP_NF_TARGET_TOS is not set > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_ECN=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_TARGET_TTL=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_RAW=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_ARPTABLES=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_ARPFILTER=m > >> >> >>> >> >> >> >>> > CONFIG_IP_NF_ARP_MANGLE=m > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # IPv6: Netfilter Configuration (EXPERIMENTAL) > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_QUEUE=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_IPTABLES=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_RT=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_OPTS=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_FRAG=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_HL=m > >> >> >>> >> >> >> >>> > # CONFIG_IP6_NF_MATCH_OWNER is not set > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_IPV6HEADER=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_AH=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_MH=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MATCH_EUI64=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_FILTER=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_LOG=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_REJECT=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_MANGLE=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_TARGET_HL=m > >> >> >>> >> >> >> >>> > CONFIG_IP6_NF_RAW=m > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > # Bridge: Netfilter Configuration > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_NF_EBTABLES=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_BROUTE=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_T_FILTER=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_T_NAT=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_802_3=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_AMONG=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ARP=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_IP=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_LIMIT=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_MARK=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_PKTTYPE=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_STP=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_VLAN=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ARPREPLY=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_DNAT=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_MARK_T=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_REDIRECT=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_SNAT=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_LOG=m > >> >> >>> >> >> >> >>> > CONFIG_BRIDGE_EBT_ULOG=m > >> >> >>> >> >> >> >>> > CONFIG_IP_DCCP=m > >> >> >>> >> >> >> >>> > CONFIG_INET_DCCP_DIAG=m > >> >> >>> >> >> >> >>> > CONFIG_IP_DCCP_ACKVEC=y > >> >> >>> >> >> >> >>> > > >> >> >>> >> >> >> >>> > # > >> >> >>> >> >> >> >>> > _______________________________________________ click mailing list [email protected] https://amsterdam.lcs.mit.edu/mailman/listinfo/click
